Search Results for "ethrtnet/ip"

...Prevention system not installed. eth0 used as output/ LAN socket, to run internet and access router. eth1, which can be USB -> Ethernet port, is used as WAN port, to connect Pi board to Internet IP. to flash img file, you can restore in SD card, or use Balena Etcher to flash. or you can use DD commend of UNIX. **USERNAME** - root **PASSWORD** - bing.google12

OSPF_SNMP_v1.0.py is an OSPF network discovery script. It allows the discovery of all OSPF network devices in the network, without connecting to each of them or knowing all their IP addresses. The user must provide the IP and SNMP community string of a single OSPF device in the network (for example, a device in the core) and the script searches for all other OSPF routers. Prior to running the script, the user should configure SNMPv2 community string on the device and also include the subnet between his PC and the router into the OSPF process, so he has IP connectivity to all other OSPF nodes. ...

...The script reads the IPs of the devices from the NETWORK_IP file, then gets the SSHv2/Telnet credentials from the SSH_USERPASS file and sends the commands you enter in the CMD_FILE file to all the devices. The script also checks if all the needed files exist, if all the IP addresses are valid and if all the devices are reachable. Tools used: Python 2.7.3, GNS3, Linux.

...Telnet username/password parameters are configured within the script. This feature can be further customized to prompt the user for them or read them from a file. The script also checks if all the needed files exist, if all the IP addresses are valid and if all the devices are reachable. Tools used: Python 2.7.3, GNS3, Linux.

pyforward is a GTK+ front-end to three core linux technologies that make it possible to turn your computer into a wifi access point in infrastructure mode: 1. iptables - To enable routing of your requests. 2. dnsmasq - To assign ip-addresses using dhcp. 3. hostapd - To enable wifi access to your machine in infrastructure mode. Refer the wiki page for more information on how to run pyforward. Note: Presently I'm in "development" mode. So, I urge the users of pyforward to make any feature-requests on the Discussion page or report any bugs.

Steganoroute is a tool to send steganographed text messages to another computer over the network. The receiver must make a traceroute to the sender using the mtr program (and pressing 'd' once to switch the display mode to the continuous graph). This tool, the sender, creates several fake hops and makes them answer the ICMP packets (or not) to write the letters one by one on the mtr client screen.