Search Results for "pentest operating system"

Image of OpenWrt OS, with snort community featured in, for Raspberry Pi 4/ 4B+ and 400, basically for Processor BCM2711. Installed Snort Community Model to Intrusion Detection system. Prevention system not installed. eth0 used as output/ LAN socket, to run internet and access router. eth1, which can be USB -> Ethernet port, is used as WAN port, to connect Pi board to Internet IP. to flash img file, you can restore in SD card, or use Balena Etcher to flash. or you can use DD...

Instructions: 1. Write this .iso file to a Pen Drive, with the Free multibootusb software ( links below ) 2. Boot from the Pen Drive, after changing the BIOS Boot Order quickly on system startup 3. First startup will show some info dialogs. These can be cancelled without making any changes 4. Click on the opendhcp folder link on Desktop 5. Right click the set_eth0_static_ipaddress.sh file and choose Open as Text option. Edit the file to meet your network needs. To know about...

KeexyBox allows you to do parental control, block ads, limit telemetry, and browse the Internet anonymously from your home network without installing any software on your devices. It also can be used to create a public wireless access point with the captive portal. It is a software program which requires a Raspberry PI box and which is installed on Raspbian. It constitutes a cut-off point between your devices (computers, tablets, smartphones, etc.) and your router or Internet box....

The Common Open Research Emulator (CORE) is a tool for emulating networks on one or more machines. You can connect these emulated networks to live networks. CORE consists of a GUI for drawing topologies of lightweight virtual machines, and Python modules for scripting network emulation.

wl500g is ASUS Oleg's based custom firmware. It is free with custom firmware features, and supports the following branches and models: 1.9.2.7-rtn (mainstream, 2.6.22 kernel based, supports: > ASUS RT-N16, RT-N15U, RT-N12, RT-N12B1, RT-N10, RT-N10U, RT-N10UB1, WL-500gP, WL-500gPv2, WL-500W); 1.9.2.7-d (stable/suspended, 2.4.37 kernel based, supports: > ASUS WL-500gP, WL-500gPv2, WL-500W, WL-500gX, WL-520gU, WL-550gE, WL-330gE, WL-320gE, WL-320gP).

Milkshake is a Slackware-based Linux distribution that boots from a USB stick and turns an unused PC into a home firewall/router. This project is currently in prealpha and is not intended for use yet. Please do not rate it up or down yet.

Calculator for the 4-digit hexadecimal "configuration register" used in Cisco routers for bootup settings. It is meant to be an open source (GPLv3) and cross-platform alternative to the freeware program boson.com hosts.