Search Results for "software design tools"

...The FlowViewer tools provide additional graphing and tracking features by utilizing open source software including Thomas Boutrell’s gd, Lincoln Stein's GD, Martien Verbruggen's GD::Graph, and Tobias Oetiker’s RRDtool. FlowViewer v4.6 fixes non-UTC local time environments for FlowViewer and FlowGrapher, and $no_devices_or_exporters FlowMonitor_Collector problem.

Fancyss is a “scientific Internet access / bypassing censorship” toolkit targeted principally to Asus routers running AsusWRT or Merlin-based firmware. The project provides a plugin suite (with “software center” integration) so that home routers can run proxy or tunneling tools (e.g. V2Ray) to circumvent firewall or censorship (“GFW” in the Chinese context). Because it integrates into the router’s firmware environment, fancyss automates configuration, routing, and firewall rules to minimize manual tinkering. It supports multiple architectures and firmware versions, though some submodules or variants (e.g. ...

Python script for pushing the same configuration (stored in a predefined file) on multiple devices at the same time via SSHv2. The script reads the IPs of the devices from the NETWORK_IP file, then gets the SSHv2/Telnet credentials from the SSH_USERPASS file and sends the commands you enter in the CMD_FILE file to all the devices. The script also checks if all the needed files exist, if all the IP addresses are valid and if all the devices are reachable. Tools used: Python 2.7.3,...

Python script for pushing the same configuration (stored in a predefined file) on multiple devices at the same time via Telnet. The script reads the IPs of the devices from the NETWORK_IP file and sends the commands you enter in the CMD_FILE file to all the devices. Telnet username/password parameters are configured within the script. This feature can be further customized to prompt the user for them or read them from a file. The script also checks if all the needed files exist, if...

Program will send wake on lan packet to machine on ethernet using the MAC address. A configuration file MWakeOnLan.ini can be used to hold name/ethernet values for easy command line execution. The configuration file consists of name=etheraddress pairs. A # marker is used for comment lines Flags: -l | List All Name/Value Pairs Example 1: C:> MWakeOnLan 00:2E:27:4B:20:34 Example 2: C:> MWakeOnLan server1 server2

...Features: * 5-port router for mesh network (0 south, 1 west, 2 north, 3 east, 4 local) * The dimension order routing (XY routing) * Available flow control methods: wormhole, SDM, VC * Reconfigurable number of virtual circuits, buffer size, data width * Fully synthesizable router implementation * SystemC testbench provided Languages: * Routers are written in synthesizable SystemVerilog * Test benches are provided by SystemC Software requirements: * The open source Nangate 45nm cell library * Synopsys Design Compiler (Synthesis) * Cadence IUS -- NC Simulator (for SystemC/Verilog co-simulation)

jTCPfwd started as a simple Java command line tool to forward TCP ports. Lots of other features are added, for example for forwarding TCP connections over reverse TCP connections, UDP/HTTP tunnelling or writing files to a network share.