Search Results for "lan"

Image of OpenWrt OS, with snort community featured in, for Raspberry Pi 4/ 4B+ and 400, basically for Processor BCM2711. Installed Snort Community Model to Intrusion Detection system. Prevention system not installed. eth0 used as output/ LAN socket, to run internet and access router. eth1, which can be USB -> Ethernet port, is used as WAN port, to connect Pi board to Internet IP. to flash img file, you can restore in SD card, or use Balena Etcher to flash. or you can use DD commend of UNIX. **USERNAME** - root **PASSWORD** - bing.google12

Instructions: 1. Write this .iso file to a Pen Drive, with the Free multibootusb software ( links below ) 2. Boot from the Pen Drive, after changing the BIOS Boot Order quickly on system startup 3. First startup will show some info dialogs. These can be cancelled without making any changes 4. Click on the opendhcp folder link on Desktop 5. Right click the set_eth0_static_ipaddress.sh file and choose Open as Text option. Edit the file to meet your network needs. To know about...

Ready to use OpenWRT NAT router appliance for ©VMWare ©ESXi. You only have to uncompress and register it to your ©ESXi server to be able to use it as a fencing device between your LAN network and some NATed network inside your ©ESXi host. It can also be easily configured to serve as a firewall in a dedicated ©ESXi host. You can follow the setup guide at https://33hops.com/vmware-esxi-nat-with-custom-firewall.html The appliance comes in a very small package (less than 5 MB), still it's fully functional, make not mistake. ...

This tool act as ad-hoc NATP and user-space router for all connections comming from selected interface (and outside address range served by HDCP - for example) to the rest of world. If you have device with static IP and there is no way to change it this may be solution to connect it to any other LAN.

...FRR’s seamless integration with the native Linux/Unix IP networking stacks makes it applicable to a wide variety of use cases including connecting hosts/VMs/containers to the network, advertising network services, LAN switching and routing, Internet access routers, and Internet peering. FRR has its roots in the Quagga project. In fact, it was started by many long-time Quagga developers who combined their efforts to improve on Quagga's well-established foundation in order to create the best routing protocol stack available. We invite you to participate in the FRRouting community and help shape the future of networking. ...

The system performs administration of the users with Internet access through a static IP addresses or PPPoE sessions, limits their speed and automatically stops the service provided after a specified date. Get the latest development version. git clone https://github.com/mysticall/imslu.git

Program will send wake on lan packet to machine on ethernet using the MAC address. A configuration file MWakeOnLan.ini can be used to hold name/ethernet values for easy command line execution. The configuration file consists of name=etheraddress pairs. A # marker is used for comment lines Flags: -l | List All Name/Value Pairs Example 1: C:> MWakeOnLan 00:2E:27:4B:20:34 Example 2: C:> MWakeOnLan server1 server2

Steganoroute is a tool to send steganographed text messages to another computer over the network. The receiver must make a traceroute to the sender using the mtr program (and pressing 'd' once to switch the display mode to the continuous graph). This tool, the sender, creates several fake hops and makes them answer the ICMP packets (or not) to write the letters one by one on the mtr client screen.

Redlink is a script designed to provide link redundancy for a Linux router with two links. It automatically identifies the availability of the links and manages routing rules in order to keep the router and the LAN behind it with internet access.

Ssh-based management page for draytek routers. Monitoring for lan/wan status and dynamic ip addresses, execution of remote commands, automated reboots and email notification.