Search Results for "file upload script"

Python script for pushing the same configuration (stored in a predefined file) on multiple devices at the same time via Telnet. The script reads the IPs of the devices from the NETWORK_IP file and sends the commands you enter in the CMD_FILE file to all the devices. Telnet username/password parameters are configured within the script. This feature can be further customized to prompt the user for them or read them from a file. ...

Python script for pushing the same configuration (stored in a predefined file) on multiple devices at the same time via SSHv2. The script reads the IPs of the devices from the NETWORK_IP file, then gets the SSHv2/Telnet credentials from the SSH_USERPASS file and sends the commands you enter in the CMD_FILE file to all the devices. The script also checks if all the needed files exist, if all the IP addresses are valid and if all the devices are reachable. ...

OSPF_SNMP_v1.0.py is an OSPF network discovery script. It allows the discovery of all OSPF network devices in the network, without connecting to each of them or knowing all their IP addresses. The user must provide the IP and SNMP community string of a single OSPF device in the network (for example, a device in the core) and the script searches for all other OSPF routers. Prior to running the script, the user should configure SNMPv2 community string on the device and also include the subnet between his PC and the router into the OSPF process, so he has IP connectivity to all other OSPF nodes. ...