Search Results for "llama-cpp-static"

OpenWrt Project is a Linux operating system targeting embedded devices. Instead of trying to create a single, static firmware, OpenWrt provides a fully writable filesystem with package management. This frees you from the application selection and configuration provided by the vendor and allows you to customize the device through the use of packages to suit any application. For developers, OpenWrt is the framework to build an application without having to build a complete firmware around it; for users this means the ability for full customization, to use the device in ways never envisioned.

This tool act as ad-hoc NATP and user-space router for all connections comming from selected interface (and outside address range served by HDCP - for example) to the rest of world. If you have device with static IP and there is no way to change it this may be solution to connect it to any other LAN.

Convert static routes from/to hex view. For example from "0x18AC100CC0A8000200C0A8010" to "24/172.16.12 192.168.0.2 0/192.168.1.1" and back.

The system performs administration of the users with Internet access through a static IP addresses or PPPoE sessions, limits their speed and automatically stops the service provided after a specified date. Get the latest development version. git clone https://github.com/mysticall/imslu.git

ROVELLA allows to share TCP resources over the internet, also from machine behind firewall and without a public IP nor static. It is simple and inexpensive. You can run multiple instances on a single public machine to share multiple services also on different machines. Version is 0.1, but it works pretty well!

...The modular architecture allows rapid introduction of new features and functionality, including support for custom hardware. It features a command line interface, Telnet, FTP, and TFTP access, an NTP client and server, a DNS proxy cache, a DHCP relay, static routes, blackhole routes, static ARP, proxy ARP, RIP version 2 (RFC 2082, RFC 2453), OSPF version 2 (RFC 2328), Access Control Lists, and SNMP.

A simple NAT(network address translator) for IPv6 (Linux only). Make sure if you really need it before using it. Functions: 1. IPv6 auto configuration; 2. TCP, UDP and ICMP-Echo port forwarding; 3. static port mapping for TCP and UDP.

Redlink is a script designed to provide link redundancy for a Linux router with two links. It automatically identifies the availability of the links and manages routing rules in order to keep the router and the LAN behind it with internet access.