Search Results for "hardware"

EQ Track purpose is to provide amateur telescope makers (ATM) with electronic board schematics and embedded software to control their telescope mount via stepping motors. EQ Track comes in different "flavors" : - "Basic" controls the right ascension and declination motors of an equatorial mount. - "Go To" controls the motors of a mount in any orientation (ie. equatorial, altazimuth, alt-alt), to point and track equatorial coordinates.

This project has been moved to http://pros.cs.purdue.edu/ PROS is a lightweight and fast alternative operating system for the VEX Cortex Microcontroller. It features multitasking, low-level control, and Wiring compatible functions to harness the full power of the Cortex. With a real-time kernel based on FreeRTOS and a development environment built on Eclipse CDT, PROS uses proven software to increase the reliability and usability of the VEX development system across all three major...

...For the new-generation version, we propose targeting two hardware platforms: 1. Arduino, since it's cheap and easy to use, while remaining close to the bare metal 2. A purpose-built AVR card, or easily ported to cards obtainable from sources such as futurlec.com, etc. RaspberryPi is also an option later

The cc3 project provides software for embedded vision systems. Currently, the software runs on the CMUcam3 hardware platform, which is a NXP LPC2106-based board with an onboard CMOS camera and FIFO, MMC interface, serial UARTs, and servo controller.

lysis is working on a features rich home automation system that ranges from CAN-bus, 1-wire and RF up to a HTPC; both hardware and software are addressed to make the really smart home; the domotics will provide energy saving, comfort, flexibility, safety

OpenWebServo is an Open Source Hardware and Software project. Its main goal is to develop a web-controlled servo system. The project includes web application, firmware and hardware design.

This is the worlds first and probably only FLOSS project aimed to create a lowbudget, based on availble technology, cruise missile. No this is not a Joke, its for real. Why? Since no one has tried to do this before and certainly not under the GPL.

Maiden-core is a Linux kernel robotics API module, extensible in Erc. The Maiden Project also documents and develops the Maiden architecture for mobile robots, a set of (optional) designs and standards for robots using the Maiden-core API.

This is a attempt for simple hardware emulator of Celestron's NexStar Telescope mounts. The emulator is based on MCUs like PIC18F2550 from Microchip Technology Inc.

The micro-Ants are small, cheap, 8-bit devices which may outperform current home automation systems, thanks to their "swarm intelligence". This project aims at developing a micro-Ant hardware and firmware. Join and develop with us this new technology!