Search Results for "engineering software"

EQ Track purpose is to provide amateur telescope makers (ATM) with electronic board schematics and embedded software to control their telescope mount via stepping motors. EQ Track comes in different "flavors" : - "Basic" controls the right ascension and declination motors of an equatorial mount. - "Go To" controls the motors of a mount in any orientation (ie. equatorial, altazimuth, alt-alt), to point and track equatorial coordinates.

What is it? It's a Bootloader for Microchip, Atmel, NXP, TI and 8051 devices. A Bootloader is a firmware running in the microcontroler device which allows the user to send it's own firmware without the need of a programmer. This Bootloader consists of: - firmwares for many devices (this firmware need to be send to the device's flash memory with a programmer, only once) - a PC software which communicates with the bootloader firmware in the device and send the user's program in its...

A scheme (lisp) interpreter written in ARM assembly language (currently: Cortex-M4F,M7, Cortex-A5,A8,A9, Cortex-A53; previously:ARM7TDMI, ARM920T, Cortex-M3) for education, robotics, wearable devices. Tested on Allwinner A64, Amlogic S905, Atmel SAMA5D4, SAME70, SAMV71, NXP LPC4300, RT1050, iMX8M, Samsung S5P6818, ST STM32F4, STM32F7, and TI AM3359, OMAP3530, DM3730, OMAP4430, TM4C1294 chips (previously: NXP LPC-1300,1700,2000, ATMEL AT91SAM7, STM STR711, STR911, STM32, CIRRUS EP9302, LMI...

This project has been moved to http://pros.cs.purdue.edu/ PROS is a lightweight and fast alternative operating system for the VEX Cortex Microcontroller. It features multitasking, low-level control, and Wiring compatible functions to harness the full power of the Cortex. With a real-time kernel based on FreeRTOS and a development environment built on Eclipse CDT, PROS uses proven software to increase the reliability and usability of the VEX development system across all three major...

This project comprises two main parts: 1. The classic "Rodney" as described in David L. Heisermann's book "How to build your own self-programming robot", with the original Intel 8085 code. In all likelihood, this is for reference only. I don't expect many people are going to build it 2. An updated version, running on more modern hardware, but remaining true to the algorithms published in his book. The end result will be at least three sets of code, for the Alpha, Beta and Gamma...

The cc3 project provides software for embedded vision systems. Currently, the software runs on the CMUcam3 hardware platform, which is a NXP LPC2106-based board with an onboard CMOS camera and FIFO, MMC interface, serial UARTs, and servo controller.

lysis is working on a features rich home automation system that ranges from CAN-bus, 1-wire and RF up to a HTPC; both hardware and software are addressed to make the really smart home; the domotics will provide energy saving, comfort, flexibility, safety

‘intelliworm’ is a prototype simulation of a Intelligent Species of a common earth worm,which inherits human like decision making capabilities through Neural Network intelligence representation,all developed by integrating .NET with Lisp and Yacc.

OpenWebServo is an Open Source Hardware and Software project. Its main goal is to develop a web-controlled servo system. The project includes web application, firmware and hardware design.

MuCTools is a group of command line utilities connect with Philips'P89C668 (8051 type) and other Philips microcontroller bootloaders, completing the 8051 development chain with free software for linux. muctools0.9 works with limited features. See README

Various projects focusing on, but not limited to, Python, robotics and microcontrollers.

C compiler for 8-bit microcontrollers, currently targeting the PIC 16F series

Co-operative Task Scheduler for PIC based software. Written using gpasm / mpasm macros.

Embedded uC software for a CrazyCar (see crazycar.fhbb.ch). This project generates code for various microcontrollers e.g. 8051, AVR, Fujitsu.

Maiden-core is a Linux kernel robotics API module, extensible in Erc. The Maiden Project also documents and develops the Maiden architecture for mobile robots, a set of (optional) designs and standards for robots using the Maiden-core API.