Search Results for "c-support.vim"

EQ Track purpose is to provide amateur telescope makers (ATM) with electronic board schematics and embedded software to control their telescope mount via stepping motors. EQ Track comes in different "flavors" : - "Basic" controls the right ascension and declination motors of an equatorial mount. - "Go To" controls the motors of a mount in any orientation (ie. equatorial, altazimuth, alt-alt), to point and track equatorial coordinates.

What is it? It's a Bootloader for Microchip, Atmel, NXP, TI and 8051 devices. A Bootloader is a firmware running in the microcontroler device which allows the user to send it's own firmware without the need of a programmer. This Bootloader consists of: - firmwares for many devices (this firmware need to be send to the device's flash memory with a programmer, only once) - a PC software which communicates with the bootloader firmware in the device and send the user's program in its...

This project has been moved to http://pros.cs.purdue.edu/ PROS is a lightweight and fast alternative operating system for the VEX Cortex Microcontroller. It features multitasking, low-level control, and Wiring compatible functions to harness the full power of the Cortex. With a real-time kernel based on FreeRTOS and a development environment built on Eclipse CDT, PROS uses proven software to increase the reliability and usability of the VEX development system across all three major...

This is a RGB LED Pin-back Button controlled by an AVR Microcontroller.

Universal CNC (Computer Numerical Control) system with accompanying communication and graphics libraries

The cc3 project provides software for embedded vision systems. Currently, the software runs on the CMUcam3 hardware platform, which is a NXP LPC2106-based board with an onboard CMOS camera and FIFO, MMC interface, serial UARTs, and servo controller.

Lego(TM)stopped developing the electronic system of the 80s while the demand increased. This lead to some private projects. One of these projects is the UCB-Project introduced by Stefan Vorst of the German MBFR e.V.

lysis is working on a features rich home automation system that ranges from CAN-bus, 1-wire and RF up to a HTPC; both hardware and software are addressed to make the really smart home; the domotics will provide energy saving, comfort, flexibility, safety

This project is a project to make a small robot using Linux as the OS.

uGNU/RTOS (literally "micro G'Noo RTOS") is an Open Source serial Real Time OS for microcontrollers (PIC, ATMEL).

MERP is a modular low cost robot platform designed as a research tool or for personal use. It allows real world testing of algorithms developed in simulation for trajectory planning, obstacle avoidance, human robot interaction, among others.

‘intelliworm’ is a prototype simulation of a Intelligent Species of a common earth worm,which inherits human like decision making capabilities through Neural Network intelligence representation,all developed by integrating .NET with Lisp and Yacc.

Keep It Simple Bus is a PC+MCU based Robotics Framework that utilizes serial port to interface to multiple DC/Servo/Stepper motors through PIC12F683 ising binary protocol. Main goal is to do it as cheap as possible with minimal number of components, fast

This is a collection of source code, scripts, designs, protocols and other types of documents aimed to help building and modding humanoid robots including Hitec Robonova, Kondo KHR and Robotis Bioloid. Files are contributed by robosavvy.com forum members

This is the worlds first and probably only FLOSS project aimed to create a lowbudget, based on availble technology, cruise missile. No this is not a Joke, its for real. Why? Since no one has tried to do this before and certainly not under the GPL.

MuCTools is a group of command line utilities connect with Philips'P89C668 (8051 type) and other Philips microcontroller bootloaders, completing the 8051 development chain with free software for linux. muctools0.9 works with limited features. See README

Various projects focusing on, but not limited to, Python, robotics and microcontrollers.

C compiler for 8-bit microcontrollers, currently targeting the PIC 16F series

B.O.T.S (Bots Tactical Simulation) is a programming game, where players "code" the behaviour of their bot and watch them fight with others bots in a arena. It comes with a full environnement in Java/Swing, for coding, debugging, playing matchs, etc ...

Firmware and GUI code for the Geckodrive G200X motion controller

Embedded uC software for a CrazyCar (see crazycar.fhbb.ch). This project generates code for various microcontrollers e.g. 8051, AVR, Fujitsu.

Easy, reliable, and complete Handy Board / 68HC11 boot loader from UMass Lowell

Maiden-core is a Linux kernel robotics API module, extensible in Erc. The Maiden Project also documents and develops the Maiden architecture for mobile robots, a set of (optional) designs and standards for robots using the Maiden-core API.

Custom uav is a complete flight control system in development. The project includes everything required for unmanned flight.