Search Results for "beta"

EQ Track purpose is to provide amateur telescope makers (ATM) with electronic board schematics and embedded software to control their telescope mount via stepping motors. EQ Track comes in different "flavors" : - "Basic" controls the right ascension and declination motors of an equatorial mount. - "Go To" controls the motors of a mount in any orientation (ie. equatorial, altazimuth, alt-alt), to point and track equatorial coordinates.

What is it? It's a Bootloader for Microchip, Atmel, NXP, TI and 8051 devices. A Bootloader is a firmware running in the microcontroler device which allows the user to send it's own firmware without the need of a programmer. This Bootloader consists of: - firmwares for many devices (this firmware need to be send to the device's flash memory with a programmer, only once) - a PC software which communicates with the bootloader firmware in the device and send the user's program in its...

A scheme (lisp) interpreter written in ARM assembly language (currently: Cortex-M4F,M7, Cortex-A5,A8,A9, Cortex-A53; previously:ARM7TDMI, ARM920T, Cortex-M3) for education, robotics, wearable devices. Tested on Allwinner A64, Amlogic S905, Atmel SAMA5D4, SAME70, SAMV71, NXP LPC4300, RT1050, iMX8M, Samsung S5P6818, ST STM32F4, STM32F7, and TI AM3359, OMAP3530, DM3730, OMAP4430, TM4C1294 chips (previously: NXP LPC-1300,1700,2000, ATMEL AT91SAM7, STM STR711, STR911, STM32, CIRRUS EP9302, LMI...

This project has been moved to http://pros.cs.purdue.edu/ PROS is a lightweight and fast alternative operating system for the VEX Cortex Microcontroller. It features multitasking, low-level control, and Wiring compatible functions to harness the full power of the Cortex. With a real-time kernel based on FreeRTOS and a development environment built on Eclipse CDT, PROS uses proven software to increase the reliability and usability of the VEX development system across all three major...

...An updated version, running on more modern hardware, but remaining true to the algorithms published in his book. The end result will be at least three sets of code, for the Alpha, Beta and Gamma versions of Rodney. We would also like to experiment with a "Delta" version which could use either bare RF or WiFi to exchange state data between machines. A "hive mind" if you like. For the new-generation version, we propose targeting two hardware platforms: 1. Arduino, since it's cheap and easy to use, while remaining close to the bare metal 2. ...

Universal CNC (Computer Numerical Control) system with accompanying communication and graphics libraries

The cc3 project provides software for embedded vision systems. Currently, the software runs on the CMUcam3 hardware platform, which is a NXP LPC2106-based board with an onboard CMOS camera and FIFO, MMC interface, serial UARTs, and servo controller.

Lego(TM)stopped developing the electronic system of the 80s while the demand increased. This lead to some private projects. One of these projects is the UCB-Project introduced by Stefan Vorst of the German MBFR e.V.

OpenWebServo is an Open Source Hardware and Software project. Its main goal is to develop a web-controlled servo system. The project includes web application, firmware and hardware design.

MogoBot is a small stepper motor driven robot that can easily be used by adults and kids alike. The robot follows LOGO like commands. The robot utilizes a Z8 Encore processor, and Mitsumi Stepper motors for motivation.

B.O.T.S (Bots Tactical Simulation) is a programming game, where players "code" the behaviour of their bot and watch them fight with others bots in a arena. It comes with a full environnement in Java/Swing, for coding, debugging, playing matchs, etc ...

Firmware and GUI code for the Geckodrive G200X motion controller

Embedded uC software for a CrazyCar (see crazycar.fhbb.ch). This project generates code for various microcontrollers e.g. 8051, AVR, Fujitsu.

Some basic programms concerning the PIC Micro Series starting with the PIC 16F676 written in asm and c

The micro-Ants are small, cheap, 8-bit devices which may outperform current home automation systems, thanks to their "swarm intelligence". This project aims at developing a micro-Ant hardware and firmware. Join and develop with us this new technology!