Search Results for "configuration"

...The software includes a suite of scripts for calibration, tensioning, and positioning, ensuring that the physical hand operates accurately and consistently across different configurations. It is designed to integrate seamlessly with hardware models defined through configuration files, enabling flexible deployment across variations of the ORCA Hand. The framework also supports real-time control and testing, allowing users to connect to the device, enable torque, and issue precise joint movement commands programmatically.

...Wireshark provides some filters to facilitate data analysis but the high amount of recorded information still makes an analysis complicated for many people who do not have a very deep knowledge of the ethercat protocol and Wireshark tools. Ecang can help these people! Ecang extracts the list of the slaves managed and the PDOs exchanged in an ethercat network directly from the network configuration file (ENI file) .xml, thanks to this data it can read numerous information from the file generated by the sniffer (.pcapng) and transfers them to a comma-separated values ​​file (.csv) already applying a first level of validation.

...Supports programming vis ISP, Serial (Optiboot - all parts with >4k flash, and all parts with 4k flash for which an 8k version is available) or VUSB (Micronucleus - where appropriate) There are 272 different versions of micronucleus built (and part of the 2.0.0-dev branch now), and optiboot will dwarf that number! 0 of those have been tested. Obviously, we are leaning very heavily on automation of configuration generation for this release. Half of the tinyNeoPixel speeds have had the assembly routines modified in major ways (there's no more stupid menu for the port), but they are untested. Virtual boot relies on rewriting the vector table, such that the RESET vector points to the bootloader.

...Available in the PlatformIO registry. Pretty straightforward sketches, a simple light for example (TODO: adapt to V3). Cute HTTP API/Web UI/App to remotely send the configuration to the device and get information about it. ESP8266 framework for Homie, a lightweight MQTT convention for the IoT.

openCONFIGURATOR is an open-source configuration framework for easy setup, configuration and maintenance of any POWERLINK (https://goo.gl/U9tjiy) network. It ideally complements openPOWERLINK, the open source POWERLINK protocol stack for master and slave. The project consists of a core library implementing the configuration algorithms and an eclipse plugin base user interface.

Eclipse update site: http://sourceforge.net/projects/eclipse-plugin.openconf.p/files/update-site/ KNOWN ISSUE WITH THE UPDATE SITE DUE TO SOURCEFORGE ENCRYPTION POLICIES: If you experience problems with the SSL handshake during update please refer to http://gnuarmeclipse.github.io/blog/2017/01/29/plugins-install-issue/ Install via Eclipse marketplace: https://marketplace.eclipse.org/content/ethernet-powerlink-openconfigurator The project provides a plugin for the openCONFIGURATOR core library enabling the creation and configuration of a POWERLINK network (http://www.ethernet-powerlink.org/) in the Eclipse IDE (https://www.eclipse.org). Step-by-step video tutorials: Part 1 - Setup - https://goo.gl/l7eTrC Part 2 - RMN configuration - https://goo.gl/hHY12A Part 3 - PDO mapping - https://goo.gl/8gsRPq Part 4 - Parameter configuration - https://goo.gl/Xjuqjz Part 5 - Modular CN - https://goo.gl/PGCgCk Part 6 - Firmware Handling - https://goo.gl/yBn7ph

SoundStepper is a "100% software" telescope controller, for Windows, using audio hardware to control step motors at real time. All it requires to operate are external step motor drives, which can be a commercial "pulse/direction" drive or analog current amplifiers. Documentation: http://soundstepper.sourceforge.net/

PLC-EMU is a Programmable Logic Controller EMUlator for automation applications on linux with digital/analog IO cards, with C functions, Ladder Diagrams,or IEC61131-compliant Instruction List/Structured Text. It is a cheap and open alternative to PLCs.

CTSoft can be used for configuring the following drives: Digitax ST Base Digitax ST Indexer Digitax ST Plus Digitax ST EZMotion FXMP25 Field Controller Mentor MP Unidrive 'Classic' in open-loop, closed-loop vector and servo modes Unidrive SP open-loop, closed-loop vector servo modes and regen mode Commander SK drives Commander GP20 Drive in open-loop, closed-loop vector Unidrive ES open-loop, closed-loop vector and servo modes Unidrive PV CTSoft system requirements: Pentium...

...In order to do that, we want project a CNC router with a mechanism that allows a fast utensil change and a controlling firmware which can use different utensils changing some configuration parameters.

openCONFIGURATOR TCL/TK GUI is an open-source configuration tool for easy setup, configuration and maintenance of any POWERLINK network. It ideally complements openPOWERLINK, the open source POWERLINK protocol stack for master and slave. THIS APPLICATION IS NO LONGER SUPPORTED. PLEASE INSTALL THE ECLIPSE PLUGIN BASED OPENCONFIGURATOR.

Cell decomposition is one of the first applicable solution for path planning - robot path planning. The algorithm aims to find free areas (cells not occupied by obstacles) in the configuration space, and build a graph of adjacency for these cells.

ATMEL ATMega1280 based powerful, multifunctional, reliable, expandable and extremely flexible hardware platform for home and industrial processes automation, robotic toys, security systems, education and enjoyment.

Project migrated: https://github.com/arktools This library aims at providing a uniform method for simulation, prototyping, and testing of autonomous robots. It also adheres to the object-oriented paradigm to ease system configuration and development. http://www.youtube.com/watch?v=-wQVrM5SL2o&fe

A small camera server providing web access to cameras connected to the computer. Special interest in this project is to have little to no external dependencies (no socket libs, no threading libs - at most, maybe camera drivers).