Search Results for "parrot-security-4"

Program is written in C++ for Windows. Program is installed on a computer connected to the card reader used com-port. Program reads data from com port and writes data to local log, transmits it to ARM of guard and to SCUD server in form of text files.

RfId 4 p

OpenBeacon is a free design for an active RFID device which operates in the 2.4GHz ISM band, containing a unique serial number. OpenBeacon is designed as a transceiver device and therefore both transmits and receives radio waves.

ColdFusion ========== ColdFusion is a Raspberry pi RFID access control system. It uses [wiringPi](http://wiringpi.com/) to control the Piface that toggle's the electronic lock in the door. It then compares the UID given from the Scanner to the ones in the data directory, If a match is found it will open the doors lock. Be sure to read the WIKI https://sourceforge.net/p/coldfusion/wiki/Setup/

This is a python program for the RFID reader rc522. it uses the bcm2835 libary and the rpi-rc522 library. Tutorial found here: http://bit.ly/1hYx5ao

RFID Management - development component control

Singularity is a suite of RFID Middleware to support RFID enabled Supply Chain Management, integration to the enterprise, and EPCglobal. It includes edge services for device management, event filtering, workflow, as well as integration components.

This project is intended to create an integrated and easy to use application to test and demonstrate capabilities of various RFID devices. Currently supports 4 RFID devices. Check out http://www.rfid-indonesia.com for product details.

This application allows to write NFC Forum compatible NDEF messages onto RFID tags (currently Mifare 1K cards are supported). For support please contact klaus.darilion(at)ipcom.at

Athos-RFID is a framework that aims to enable the development of distributed system to communicate heterogeneous RFID readers. The developers is abstracted by use services like serial communication, safe and distributed communication, event management.

The Fosstrak ALE Middleware is an RFID middleware solution that supports the EPCglobal ALE middleware. It connects to RFID readers that support the LLRP protocol, but also a mechanism to connect those with proprietary protocols.

The objective of Accada HAL (Hardware Abstraction Layer) is to provide a hardware abstraction and a standardized interface to proprietary RFID systems. Accada HAL allows the integration of RFID readers into the Accada Reader and Accada ALE modules.

Customized, freely programmable Reader for ISO 14443 contactless smartcards. PCB (based on Atmel ATmega32 microcontroller) and firmware by Chair for Embedded Security (EMSEC) at the Ruhr-University Bochum.

The objective of this project is to create an implementation of the EPCglobal reader protocol, for use by application developers, that will provide a uniform interface to today's major RFID reader platforms. See http://www.accada.org for more details.

This is a driver module for linux written in C language for the 310 apsx rfid reader. This device use the communication via uart (interrupt based) for dialect with a normal pc.