Search Results for "linux terminal"

Release 2.5: • Ubuntu operating system also for Raspberry Pi • Display IP address on desktop • File system readable (Overlay FS) also for Ubuntu Make your Raspberry Pi 3, Pi 4, Pi 5 or a Ubuntu PC to a Thin Client system. xtc is easy to install and easy to configure. Connect to your server with RDP, VNC, XDMCP, X2GO or ssh. Make a connection to a server with VPN. Download: https://vmfree.org/xtc/xtcen.html

Image of OpenWrt OS, with snort community featured in, for Raspberry Pi 4/ 4B+ and 400, basically for Processor BCM2711. Installed Snort Community Model to Intrusion Detection system. Prevention system not installed. eth0 used as output/ LAN socket, to run internet and access router. eth1, which can be USB -> Ethernet port, is used as WAN port, to connect Pi board to Internet IP. to flash img file, you can restore in SD card, or use Balena Etcher to flash. or you can use DD...

GROWbox Supervisor System (GROWSS) is a grow box or grow cabinet environmental controller. GROWSS uses a Raspberry Pi (RPI) & Grove sensors to monitor and control the environment in your grow box or cabinet. Environmental factors such as temperature, humidity, soil moisture, & smoke (from fire) are monitored and displayed on a terminal connected to the RPI & on a mobile app. GROWSS also controls the exhaust fan and grow lights based on the time interval (ie. 12 hours on/12 hours off) &...

AquarioPi is an IR controller that will change the light settings around the clock on multiple lights, and multiple brands of infrared (IR) remote controlled lights. All that's required is a Raspberry Pi, a resistor, an IR LED, and a breadboard or other type of circuit board or connection to the LED and resistor. Visit the AquarioPi Wiki for more information.

A complete set of code to build your own robot for cospace dance using: raspberry pi, arduino, xbee and blender,