Showing 12 open source projects for "output"

View related business solutions
  • Go from Code to Production URL in Seconds Icon
    Go from Code to Production URL in Seconds

    Cloud Run deploys apps in any language instantly. Scales to zero. Pay only when code runs.

    Skip the Kubernetes configs. Cloud Run handles HTTPS, scaling, and infrastructure automatically. Two million requests free per month.
    Try it free
  • Secure File Transfer for Windows with Cerberus by Redwood Icon
    Secure File Transfer for Windows with Cerberus by Redwood

    Protect and share files over FTP/S, SFTP, HTTPS and SCP with the #1 rated Windows file transfer server.

    Cerberus supports unlimited users and connections on a single IP, with built-in encryption, 2FA, and a browser-based web client — all deployable in under 15 minutes with a 25-day free trial.
    Try for Free
  • 1
    Iperf 2

    Iperf 2

    A means to measure network responsiveness and throughput

    Iperf here is a means of measuring networks - capacity & latency (including ECN) over sockets both TCP and UDP. The goals include maintaining an active iperf code base across a broad set of platforms and operating systems. This is a multi-threaded design that scales with the number of CPUs or cores within a system. It supports both high impact and low impact techniques to obtain and report network performance. Current release: 2.2.1, Nov 4th, 2024 About iperf 2 and iperf3: Read...
    Leader badge
    Downloads: 9,295 This Week
    Last Update:
    See Project
  • 2
    picoreplayer
    Note: The new home of pCP is www.picoreplayer.org This site is being maintained for old versions.
    Downloads: 7 This Week
    Last Update:
    See Project
  • 3
    Filt8- v3.6 alerts for WSJT-X FT8

    Filt8- v3.6 alerts for WSJT-X FT8

    Alert and filter QSO for WSJT-X FT8 FT4

    ...Offline Maps to show station grid locations as you decode them in real-time (Check out js8mapper project on https://sourceforge.net/projects/js8map/ for this same option for JS8Call) Map feature allows filtering by band, listings by callsigns or grids, and callsign lookups via QRZ or HamCall (this requires Internet). Filters & alerts WSJT-X FT8 and FT4 output for Mac/Linux/Win. Like JTAlert but minimalist and cross-platform. Works on low end systems such as Raspberry PI or laptop with minimal config, no internet required. Written in Python Problems? Email us at snitch.lyric0z@icloud.com
    Downloads: 3 This Week
    Last Update:
    See Project
  • 4
    openWrt-snort

    openWrt-snort

    Image of OpenWrt OS, with snort community featured in.

    Image of OpenWrt OS, with snort community featured in, for Raspberry Pi 4/ 4B+ and 400, basically for Processor BCM2711. Installed Snort Community Model to Intrusion Detection system. Prevention system not installed. eth0 used as output/ LAN socket, to run internet and access router. eth1, which can be USB -> Ethernet port, is used as WAN port, to connect Pi board to Internet IP. to flash img file, you can restore in SD card, or use Balena Etcher to flash. or you can use DD commend of UNIX. **USERNAME** - root **PASSWORD** - bing.google12
    Downloads: 1 This Week
    Last Update:
    See Project
  • Our Free Plans just got better! | Auth0 Icon
    Our Free Plans just got better! | Auth0

    With up to 25k MAUs and unlimited Okta connections, our Free Plan lets you focus on what you do best—building great apps.

    You asked, we delivered! Auth0 is excited to expand our Free and Paid plans to include more options so you can focus on building, deploying, and scaling applications without having to worry about your security. Auth0 now, thank yourself later.
    Try free now
  • 5

    pi-gpio

    A dynamic C library to control Raspberry Pi GPIO channels

    A dynamic C library to control Raspberry Pi GPIO channels Supports all production models / all SOC This library has code to:- Read Raspberry Pi Information Perform basic GPIO functions • Set gpio as input or output • Read/Write gpio • Set pullup/down of gpio • Read the current gpio mode • Read gpio pull/up down (Pi4/BCM2711 only) Software PWM on all pins Hardware PWM support Read/Set PAD drive, hysteresis & slew settings I²C SPI
    Downloads: 0 This Week
    Last Update:
    See Project
  • 6

    solaton

    Monitor software for the epever solar pv charge controller.

    This software is used to extract operational data from the EPEVER Triron solar-PV controller, including its PV power output, battery voltage, load current, device temperatute, etc. Data collection is done in two halves: a client ("solatonclient") that talks to the controller via a serial port and RS-485 adapter, and a server ("solatonserver") that stores the information in files. The "solatonclient" sends information to the "solatonserver" over the network, and because it does not need to write to the file-system itself it can be run on a small computer such as a Raspberry Pi.
    Downloads: 0 This Week
    Last Update:
    See Project
  • 7
    VitOS for RPi4
    ...Then plug in the micro SD card to your Raspberry Pi4. You can use iOS app and Android app named "VitOS Manager" to manage the VitOS. VitOS V1.0 supports USB DAC as audio output device. You can connect your USB DAC to the USB port on your RPi4 board. With VitOS Manager, you are able to install Roon Bridge to the VitOS. Then you can discover the RPi4 board with Roon apps and play music.
    Downloads: 0 This Week
    Last Update:
    See Project
  • 8
    BerryNet

    BerryNet

    Deep learning gateway on Raspberry Pi and other edge devices

    ...For example, Figure 3 shows the analyzed results from the camera hosted in the DT42 office. The frames were captured by the IP camera and they were submitted into the AI engine. The output from the AI engine will be shown in the dashboard.
    Downloads: 0 This Week
    Last Update:
    See Project
  • 9
    iHome by ionware

    iHome by ionware

    iHome Smart Home System Platform

    iHome is a fully tested Smart Home Automation system using the Raspberry Pi Zero WiFi SBC and Linux OS and has all the functional features of NEST or ECOBEE smart thermostats with the added benefit of full privacy and security at less than half the price! It incorporates MBLogic with algorithms and Modbus coms for HVAC home control via the ionware modbus compatible ionC1 input/output controller board. The iHome software system comes fully configured as a SD Card image file for Raspberry Pi Zero wifi Plug and Play capability complete with MBLogic, Node-RED and MQTT already fully installed and ready to go. See wiki instructions to burn the SD Card image file, insert into your RPi Zero and Plug and Play. ...
    Downloads: 0 This Week
    Last Update:
    See Project
  • Stop Cyber Threats with VM-Series Next-Gen Firewall on Azure Icon
    Stop Cyber Threats with VM-Series Next-Gen Firewall on Azure

    Native application identity and user-based security for your Azure cloud

    Gain integrated visibility across all traffic in a single pass. Deploy Palo Alto Networks VM-Series to determine application identity and content while automating security policy updates via rich APIs.
    Get a free trial
  • 10
    Asphyre

    Asphyre

    Asphyre is a cross-platform framework for Delphi and FreePascal.

    Asphyre, also known as Platform eXtended Library, is a cross-platform framework for developing video games and scientific applications in Delphi, and FreePascal/Lazarus. The framework provides facilities for real-time rendering of graphics (using DirectX, OpenGL or Software Renderer), text output, mathematics (including vectors and matrices) and networking communication, among other features. It also supports singleboard devices such as Raspberry PI, Intel Galileo, BeagleBone Black and others with features like GPIO, SPI, I2C and so on, along with external displays, sensors and other peripheral devices.
    Downloads: 0 This Week
    Last Update:
    See Project
  • 11
    Perl OBD-II Logger

    Perl OBD-II Logger

    A Perl program for logging OBD-II PID data

    The goal of the Perl OBD-II Logger project is to create a flexible and efficient application that can capture and log OBD-II Mode 0x01 PID data from an automotive scantool. It is designed with accurate and efficient PID data logging in mind, and provides NO support for reading or resetting diagnostic trouble codes. By default, the output log file contains time-stamped PID values in a simple Comma Separated Values (CSV) format that can be readily imported into popular data analysis or spreadsheet applications. (Output to an SQLite3 database file is also available). It is written in Perl, so it runs in any computing environment with a working Perl interpreter. The program supports scantools that are based on the ELM Electronics ELM327 or OBD Solutions STN1110 programmed microcontrollers. ...
    Downloads: 2 This Week
    Last Update:
    See Project
  • 12

    LEMP Raspberry Pi 2

    Turn your Raspberry Pi 2 into a Nginx HTTP server.

    ...(gd, imap and mcrypt) Changelog: 09-16-2015 – Fixed sshd root access and enabled autostart of sshd on boot. 09-12-2015 – Tested image on 3 different Raspberry Pi 2 boards. 09-10-2015 – Performed pacman -Syu 09-10-2015 – Updated to work with Raspberry Pi 2 (Arm7) Known Bugs: – When using the wifi-menu command to connect to the internet instead of a network cable. There’s the following output: “cfg80211: Calling CRDA to update world regulatory domain” …this can be safely ignored. Let me know if you find the fix in comments below. I’ve tried several. It does not affect the function of wifi. Turn your Raspberry Pi 2 into a Nginx HTTP server with Arch Linux ARM + Nginx + MariaDB(MySQL) + PHP. Preconfigured and packaged into a downloadable image.
    Downloads: 0 This Week
    Last Update:
    See Project
  • Previous
  • You're on page 1
  • Next
MongoDB Logo MongoDB