Search Results for "ip attack python"

Iperf here is a means of measuring networks - capacity & latency (including ECN) over sockets both TCP and UDP. The goals include maintaining an active iperf code base across a broad set of platforms and operating systems. This is a multi-threaded design that scales with the number of CPUs or cores within a system. It supports both high impact and low impact techniques to obtain and report network performance. Current release: 2.2.1, Nov 4th, 2024 About iperf 2 and iperf3: Read...

Image of OpenWrt OS, with snort community featured in, for Raspberry Pi 4/ 4B+ and 400, basically for Processor BCM2711. Installed Snort Community Model to Intrusion Detection system. Prevention system not installed. eth0 used as output/ LAN socket, to run internet and access router. eth1, which can be USB -> Ethernet port, is used as WAN port, to connect Pi board to Internet IP. to flash img file, you can restore in SD card, or use Balena Etcher to flash. or you can use DD...

This project turns edge devices such as Raspberry Pi into an intelligent gateway with deep learning running on it. No internet connection is required, everything is done locally on the edge device itself. Further, multiple edge devices can create a distributed AIoT network. At DT42, we believe that bringing deep learning to edge devices is the trend towards the future. It not only saves costs of data transmission and storage but also makes devices able to respond according to the events...

This image has been created for those who wan to listen radio and music in the car without having a special car player. You will need only a smartphone with bluethooth , raspberry pi , bluethooth device reconised by raspberry pi and a min 8 gb card, and optionaly a gsm 3g modem. You connect to the device via bluethooth. It is Visible in the first 30 seconds after boot . Device IP on the bluethooth is 192.168.3.1 and lan is configured to get ip from any dhcp server.