Search Results for "program files"

Fully automated setup of bluetooth, internet radio player (PyRadio), local music files player (mplayer), on a headless RaspberryPi, connecting to a stereo system's bluetooth receiver (bash script, chmod +x it to run). To install automatically, copy => paste => run the commands below in a terminal program (using the 'Terminal' app in the system menu, or over remote SSH), while logged in AS THE USER THAT WILL RUN THE APP (user must have sudo privileges): wget --no-cache -O bt-radio-setup.bash https://tinyurl.com/bt-radio-setup chmod +x bt-radio-setup.bash ....

Tria O.S. detects hard & soft specs of the PC where you run it, you can load this info or specify it manually to let the program inform you what would be the best operating system for a specific PC, with the specified hardware, and then see the difference by adding RAM, a SSD hard drive, changing the graphics card ... etc. REQUIREMENTS: For Linux, you need GAMBAS 3.3 or later, so you will have to install the gambas3 package before installing. 90's EDITION needs 160 MB (192 MB on...

myPower is a simple monitoring and logging program for the Raspberry Pi. It collects live power usage data from the LeChacal RPICT8 current HAT and CT Sensors. myPower logs the data to daily files calculating each day's KiloWatt Hour Usage. **myPower Remote App is Still In Development** The collected data can be viewed in a user friendly format with a line graph and pie chart.

...You need to be running in text only mode to use this library as it does not use the X windowing system for graphics. See raspi-config options to enable this boot option. Compilation is simple see the "comptest" file for the command line options to make the test program. Place all the files in a folder on your PI use> make Makefile or run ./comptest

Experix is a command-line driven environment for laboratory data acquisition and device control and graphical presentation and analysis of data. Written in C for GNU-Linux . Tested on PC and Raspberry Pi. The core is written very generally in order to support applications by means of script files. Device interfaces: PCMCIA daq (2 devices tested) via kernel module with interrupt handler and memory-mapped data; USB daq (1 device tested) using libusbx; running an equipment servicing program via pipes. Interfaces accessible via commands and scripts: file i/o modelled on stdio and stdlib; usb control and bulk transfers; socket operations; webcam; graphics via framebuffer. ...

Simple, lightweight, cross-platform (Windows / Linux / ARM6 Linux), cross-arch (x32 / x64), standalone command line file encryption program. GnuPG is probably the best application for cross-platform encryption. However, its usage on Windows PCs may be inconvenient (installation administrator rights; large executable size for perhaps just a one-time file decryption, complicated command-line switches for stronger encryption). NCrypt would fulfill this task, but does not operate on 64-bit...