Search Results for "multi-system" - Page 5
Sort By:
Showing 428 open source projects for "multi-system"
View related business solutions-
$300 Free Credits for Your Google Cloud ProjectsLaunch your next project with $300 in free Google Cloud credits—no strings attached. Test, build, and deploy without risk. Use your credits across the entire Google Cloud platform to find what works best for your needs. After your credits are used, continue with always-free tier services. Only pay when you're ready to scale. Sign up in minutes and start exploring.
-
Custom VMs From 1 to 96 vCPUs With 99.95% UptimeLive migration and automatic failover keep workloads online through maintenance. One free e2-micro VM every month.
-
1
TFT_eSPI
Arduino and PlatformIO IDE compatible TFT library
An Arduino IDE compatible graphics and fonts library for 32-bit processors. The library is targeted at 32-bit processors, it has been performance-optimized for STM32, ESP8266 and ESP32 types. The library can be loaded using the Arduino IDE's Library Manager. Direct Memory Access (DMA) can be used with the ESP32, RP2040, and STM32 processors to improve rendering performance. "Four wire" SPI and 8 bit parallel interfaces are supported. Due to the lack of GPIO pins, the 8-bit parallel interface... -
2
Midbar
Midbar is more than just an open source password vault!
Midbar is more than just a password vault! It's made to significantly increase the cost of unauthorized access to its your personal data. Some tutorials: ESP32 V4.0: https://www.instructables.com/Midbar-V40/ Raspberry Pi Pico V2.0: https://www.instructables.com/Midbar-Raspberry-Pi-Pico-Version-V20/ ESP32 V5.0: https://www.instructables.com/Midbar-V50/ STM32F401CCU6 + Arduino Uno Version V1.0: https://www.instructables.com/Midbar-STM32F401CCU6-Arduino-Uno-Version/ RTL8720DN +... -
3
Chromium OS Raspberry Pi
Build your Chromium OS for Raspberry Pi 4B
Build your Chromium OS for Raspberry Pi 4B, Pi400, and the latest Raspberry Pi 5. We get it, it's confusing. There are Chromium OS for Raspberry Pi, openFyde that happens to boot on Raspberry Pi, and FydeOS for You - Raspberry Pi 400, these are different releases. This project is about Chromium OS for Raspberry Pi, not FydeOS for You - Raspberry Pi 400, also not openFyde. This project aims to only ship vanilla Chromium OS developed by Google and the Chromium Authors, ported to the world's... -
4
OnnxStream
Lightweight inference library for ONNX files, written in C++
The challenge is to run Stable Diffusion 1.5, which includes a large transformer model with almost 1 billion parameters, on a Raspberry Pi Zero 2, which is a microcomputer with 512MB of RAM, without adding more swap space and without offloading intermediate results on disk. The recommended minimum RAM/VRAM for Stable Diffusion 1.5 is typically 8GB. Generally, major machine learning frameworks and libraries are focused on minimizing inference latency and/or maximizing throughput, all of which... -
MongoDB Atlas runs apps anywhereMongoDB Atlas gives you the freedom to build and run modern applications anywhere—across AWS, Azure, and Google Cloud. With global availability in over 115 regions, Atlas lets you deploy close to your users, meet compliance needs, and scale with confidence across any geography.
-
5
Financial Freedom
An open source alternative to Mint, YNAB, and more
Financial Freedom is an open source alternative to Mint, YNAB, and more. With open source at its core, you have the freedom to review exactly what's happening with your data and participate in the improvement of the product. Break free from third parties tracking every financial footstep you have. Run this application on any device or host that supports Docker -- if that's something like AWS, Digital Ocean, or even your own Raspberry Pi running in your basement. -
6
Filt8- v3.6 alerts for WSJT-X FT8
Alert and filter QSO for WSJT-X FT8 FT4
THIS VERSION HAS A TABLE VIEW FOR SYSTEMS THAT DO NOT SUPPORT LARGE GRAPHIC DISPLAYS SUCH AS LOW-END LAPTOPS. CHECK OUT ft8mapper FOR BETTER GRAPHICS AND GRID TRACKING. Filt8 - v3.6 release - Requires Python 3.x (3.10 or higher on Mac) Scrollable maps for small screens State data as of Feb 25, 2024. Map saves settings. Map features: filter by band, click to Lookup. Offline Maps to show station grid locations as you decode them in real-time (Check out js8mapper project on ... -
7
Shock OS
A full-fledged desktop operating system designed for the Raspberry Pi.
Shock OS is a full featured desktop operating system designed exclusively for Raspberry Pi 4 / Raspberry Pi 400 computers. It is essentially Raspberry Pi OS with a modern and familiar desktop environment. Various tweaks and optimizations have been introduced to ensure a quality experience as a daily driver desktop operating system for the Raspberry Pi. -
8
openWrt-snort
Image of OpenWrt OS, with snort community featured in.
Image of OpenWrt OS, with snort community featured in, for Raspberry Pi 4/ 4B+ and 400, basically for Processor BCM2711. Installed Snort Community Model to Intrusion Detection system. Prevention system not installed. eth0 used as output/ LAN socket, to run internet and access router. eth1, which can be USB -> Ethernet port, is used as WAN port, to connect Pi board to Internet IP. to flash img file, you can restore in SD card, or use Balena Etcher to flash. or you can use DD commend of UNIX. **USERNAME** - root **PASSWORD** - bing.google12 -
9
comtool
Cross platform Serial Assistant （ 跨平台 串口 调试 助手 串口助手 串口调试助手 linux windows mac Raspberry Pi ）
-
Our Free Plans just got better! | Auth0You asked, we delivered! Auth0 is excited to expand our Free and Paid plans to include more options so you can focus on building, deploying, and scaling applications without having to worry about your security. Auth0 now, thank yourself later.
-
10
CollimationCircles
Collimation Circles, app for easy telescope collimation
This program was inspired by Mire De Collimation program written by Gilbert Grillot and Al's Collimation Aid. I combined best features of both and addes some of my own. Purpose of this program is not to reinvent the wheel, but rather to learn new technologies, become better at colimating my telescope and to learn something new. Main purpose of this program is to help you with aligning optical elements of your telescope such as secondary mirror, primary mirror, focuser, etc. Collimation... -
11
pinn-os-files
Additional OS for PINN (Raspberry PI) that I have personally ported
https://github.com/procount/pinn PINN is an enhancement of NOOBS for the Raspberry Pi. It allows the installation of MULTIPLE OSes on the same SD/HDD/SSD device with an OS chooser when booting. Built-in Admin tools allow you to backup & restore your OSes and fix OS problems by including basic disk checking, password changing, and a command shell. -
12
JPL Open Source Rover Project
A build-it-yourself, 6-wheel rover based on the rovers on Mars
...This project is intended to be a teaching and learning experience for those who want to get involved in mechanical engineering, software, electronics, or robotics. JPL is always looking to inspire the next generation of scientists, engineers, and roboticists to help us explore and learn about our solar system (and beyond!). We release the plans for this rover as a way to try and give budding enthusiasts a fun robotics project that will help teach them and get them involved in robotics sooner and at a lower cost. The specific attributes of the robot you build will depend slightly on the type of electronics and motors you buy for the system. -
13
Recently, I discovered the power of Bing Image Creator, a generative AI based on the DALL-E 3 text-to-image model. At first, I was just playing with it and testing its capabilities. However, after exploring it for roughly an hour, I started thinking about its practical applications and where I could use it. Eventually, I realized that I could use it to generate unique images and then display them on the 2.4 Inch TFT LCD with ILI9341 connected to the Raspberry Pi Pico. If you wish to learn...
-
14
TensorFlow Documentation
TensorFlow documentation
An end-to-end platform for machine learning. TensorFlow makes it easy to create ML models that can run in any environment. Learn how to use the intuitive APIs through interactive code samples. -
15
octave-raspberrypi
GNU Octave toolkit for controlling a Raspberry Pi
Basic Octave implementation of the matlab raspi extension, allowing communication to a Raspberry Pi board to control its hardware. -
16
Raspberry PI Garage Door Closer
Raspberry Pi base Garage Door Monitor and Automated Closer
Raspberry Pi base Garage Door Monitor and Automated Closer. With connected camera, and infrared sensor it can take movies, pictures, and send notification emails about events. -
17
PiNote
PiNote is a free source code editor that supports several languages.
PiNote is a free source code editor that supports several languages. Running on Windows, Linux and Raspberry Pi. Written in free pascal and Lazarus IDE, use the SynEdit component with extended syntax highlighter modules. PiNote's many features include macro recording, code highlighting, encryption and/or decryption of text and files and more. -
18
NexTask
Custom, simple, timed audio and visual reminders using cron scheduling
NexTask is intended for the Raspberry Pi, though the source can be compiled of any Linux distribution. Using cron scheduling, the user can code reminders for their household. Currently, the display program has been built. The scheduling using cron must be set up manually. In the future, a GUI will be available to help build the scheduling scripts. -
19
KhadashPay
The KhadashPay project is an open-source payment system.
The KhadashPay project is my attempt to make a payment system from scratch. As for the customers of the store where the KhadashPay is deployed, Khadash pay doesn't keep any logs whatsoever and doesn't require a bit of your personal information to create an account. You can find the tutorials here: V2.0 (ESP32 Version): https://www.instructables.com/KhadashPay-V20/ V2.0 (Raspberry Pi Pico Version): https://www.instructables.com/KhadashPay-V20-Raspberry-Pi-Pico-Version/ V3.0 (STM32F401CCU6 Version): https://www.instructables.com/KhadashPay-V30-STM32F401CCU6-Version/ V3.0 (ESP32 Version): https://www.instructables.com/KhadashPay-V30/ V3.5 (ESP32 Version): https://www.instructables.com/KhadashPay-V35/ The version of the KhadashPay that stores the data in the cloud and allows you to operate several payment terminals is available on https://sourceforge.net/projects/khadashpay-firebase-edition/ -
20
Udp2raw-tunnel
Turns UDP traffic into encrypted UDP/fakeTCP/ICMP traffic
A tunnel which turns UDP traffic into encrypted fakeTCP/UDP/ICMP traffic by using Raw Socket, helps you bypass UDP FireWalls(or unstable UDP environment). When used alone, Udp2raw tunnels only UDP traffic. Nevertheless, if you used udp2raw + any UDP-based VPN together, you can tunnel any traffic(include TCP/UDP/ICMP), currently, OpenVPN/L2TP/ShadowVPN and tinyfecVPN are confirmed to be supported. Linux host (including desktop Linux,Android phone/tablet,OpenWRT router,or Raspberry PI) with... -
21
XBandPi NOOBS
PINN/NOOBS linux distro of XBandPi (XBand modem)
A PINN/NOOBS-compatible linux distro image of XBandPi for the XBand modems (Sega Genesis, SNES/SFC). Meant for Raspberry Pi SBCs. More details about this NOOBS-compatible distro image available at the official webpage (https://www.eaglesoftltd.com/retro/genesis/xbandpi-noobs). -
22
jfModbusServer
Modbus server designed for Raspberry PI to control GPIO/I2C devices.
jfModbusServer is a Modbus Server for the Raspberry PI 2/3. Remotely access GPIO pins and read/write I2C devices. Requires Java. -
23
picroft
Unofficial Mycroft AI Raspberry Pi OS image builder.
-
24
WoodboxPlayer
A simple MP3 and web radio player for the Raspberry Pi
The WoodboxPlayer is a Java-based MP3 and web radio player intended for the single-board computer "Raspberry Pi". It can be controlled either via keyboard or via push-buttons connected to the Raspberry Pi's GPIO pins. -
25
nxcEditor
Editor for NXT and BrickPi robot (with simulator for NXT)
With the nxcEditor for Linux NXT and BrickPi robots can be programmed (the source code is highlighted). A NXC-program can be executed either on the real robot or the nxcSimulator, which is integrated in the nxcEditor (the official compiler is invoked from the nxcEditor). A C-program for the BrickPi robot can be programmed either locally on the Raspberry Pi or over a network (using the compiler on the Raspberry Pi). The nxcEditor (as well as the nxcSimulator) is designed so that programming...
