Search Results for "red hat linux"

Node-RED is a programming tool for wiring together hardware devices, APIs and online services in new and interesting ways. It provides a browser-based editor that makes it easy to wire together flows using the wide range of nodes in the palette that can be deployed to its runtime in a single-click. Node-RED provides a browser-based flow editor that makes it easy to wire together flows using the wide range of nodes in the palette. Flows can be then deployed to the runtime in a single-click....

epaper-hat.zip A PI OS trixie image for the waveshare 2.13" Touch ePaper HAT https://www.waveshare.com/wiki/2.13inch_Touch_e-Paper_HAT_Manual#Raspberry_Pi (old) epaper.zip A Raspbian Jessie Lite image for the e-Paper HAT (percheron electronics) http://www.percheron-electronics.uk/shop/ https://www.kickstarter.com/projects/1372954669/e-paper-display-hat-for-the-raspberry-pi/description Shows date, ip address and root storage usage

Tria O.S. detects hard & soft specs of the PC where you run it, you can load this info or specify it manually to let the program inform you what would be the best operating system for a specific PC, with the specified hardware, and then see the difference by adding RAM, a SSD hard drive, changing the graphics card ... etc. REQUIREMENTS: For Linux, you need GAMBAS 3.3 or later, so you will have to install the gambas3 package before installing. 90's EDITION needs 160 MB (192 MB on...

...Presented at the 2022 Great Lakes Cisco Academy Conference in Detroit Michigan. Turn your Raspberry Pi into a stand alone access point to flash images onto an e-Paper display. Image was made on a Raspberry Pi 3B+ e-Paper used was 2.6" Red/Black/White e-Ink on a RoHS HAT.

myPower is a simple monitoring and logging program for the Raspberry Pi. It collects live power usage data from the LeChacal RPICT8 current HAT and CT Sensors. myPower logs the data to daily files calculating each day's KiloWatt Hour Usage. **myPower Remote App is Still In Development** The collected data can be viewed in a user friendly format with a line graph and pie chart. Monthly, Yearly, and lifetime KiloWatt Hour Usage can also be viewed and graphed using the "myPower Remote"...

iHome is a fully tested Smart Home Automation system using the Raspberry Pi Zero WiFi SBC and Linux OS and has all the functional features of NEST or ECOBEE smart thermostats with the added benefit of full privacy and security at less than half the price! It incorporates MBLogic with algorithms and Modbus coms for HVAC home control via the ionware modbus compatible ionC1 input/output controller board. The iHome software system comes fully configured as a SD Card image file for Raspberry Pi Zero wifi Plug and Play capability complete with MBLogic, Node-RED and MQTT already fully installed and ready to go. ...

This is a preconfigured version of Rasbian that communicates with Tom de Bree:s Simp-BMS hardware. Presentation of the data from the CAN-bus is presented in Node-Red through its GUI-capability. Prerequisites: 1 - Raspberry Pi 3 or newer. 1 - USBtin CAN-USB converter 1 - Simp-BMS https://www.diyelectriccar.com/forums/showthread.php/fs-tesla-vw-outlander-bms-master-198263.html https://www.fischl.de/usbtin/ See README.txt for more info.