Search Results for "scada arm linux" - Page 2
Sort By:
Showing 57 open source projects for "scada arm linux"
View related business solutions-
MongoDB Atlas runs apps anywhereMongoDB Atlas gives you the freedom to build and run modern applications anywhere—across AWS, Azure, and Google Cloud. With global availability in over 115 regions, Atlas lets you deploy close to your users, meet compliance needs, and scale with confidence across any geography.
-
Paessler - Monitor Your Whole Network in MinutesWaiting weeks for a monitoring rollout isn't an option when infrastructure doesn't stop running. PRTG's auto-discovery scans your network and suggests from over 200 pre-configured sensor types, so you're watching servers, applications and devices within minutes, not after a multi-week deployment. Enterprise-strength monitoring, without the enterprise complexity. Start your free trial today.
-
1
Open|SpeedShop
Open|SpeedShop is an open source multi platform Linux performance tool
Open|SpeedShop is an open source multi platform Linux performance tool which is targeted to support performance analysis of applications running on both single node and large scale IA64, IA32, EM64T, AMD64, PPC, Blue Gene, ARM and Cray platforms. -
2
pyNETVARS
Python module for network variables for CoDeSys PLCs
CoDeSys v2.3 supports so called network variables. Blocks of (global) variables, that propagates over networks like TCP, UDP or UDP Multicast aso. This python module supports parsing, receiving and sending those blocks (with UDP Multicast only). With this you can add for example a Raspberry Pi Sensor to your automation network without special Network clients on your PLC. -
3
WireFactory Simulator
Small factory simulator for control logic test purpose
Wire Factory Simulator (WFS) is a free software to simulate the control of a factory, mainly controlled by IEC 61499 applications. You can build your own factory and controller. The controller can be implemented on any programming language. WFS was originally built to simulate the action of an IEC 614999 application. So, the devices in the factory are easily connected to IEC 61499 applications. The WFS were mainly tested with FBDK (http://www.holobloc.com/). Wire Factory has been... -
4
PyUltimateRobot
Controls any Robot in Python
Developed on Python to leverage state-of-the-art extensibility and easily integrated plugins Able to use low cost robots with the accuracy and dexterity of much more expensive robots, achieved in part by: a) Ability to drive movement by inexpensive DC gear head motors, including the inherent ability to specify movement by applied force rather than strict space/time control that steppers impose. b) Arms and linkages don't have to have super tight tolerances, because accuracy is... -
Veeam Data Platform v13.1 - Get Your Free TrialTry Veeam Data Platform today. Experience the unified platform that's secure by design, portable by default, and proven to recover clean, fast, and anywhere.
-
5
RTS2 - Remote Telescope System
Open source observatory control software
RTS2 is project to create an open source environment for control of a fully autonomous observatory. It is running about dozen fully autonomous observatories. Its modular design allow easily addition of new devices (to already huge supported HW list). -
6
Open Automation
Building automation (like KNX or OpenHAB) software (like CometVisu).
This project aims to provide software usefull in automation tasks like building automation. Different backends are supported like KNX or OpenHAB. Note: The project has moved to GitHub. Please consult: https://github.com/CometVisu/CometVisu - for the CometVisu https://github.com/OpenAutomationProject - for the different OpenAutomation subprojects -
7
mod_openopc
just plain WORKS
mod_openopc is a full featured implementation of the OpenOPC library for Python. It is cross platform compatible (full Python 2.5 and up). We used to recommend running it on a POSIX platform (Unix / Linux), but thanks to modest efforts since 2014, performance in Windows OS environments is excellent. -
8
BATS
Bayesian Adaptive Trial Simulator
A user-friendly, quick simulator for Bayesian Multi-Arm Multi-Stage Trials -
9
Taurus
A python based User Interface library.
The Taurus Project has *moved* to: https://github.com/taurus-org/taurus This SourceForge page is *outdated* and kept for historical reference only. Taurus is a python framework for control and data acquisition CLIs and GUIs in scientific/industrial environments. It supports multiple control systems or data sources: Tango, EPICS, ... New control system libraries and data sources can be integrated through plugins. -
Earn up to 16% annual interest with Nexo.Put idle assets to work with competitive interest rates, borrow without selling, and trade with precision. All in one platform. Geographic restrictions, eligibility, and terms apply.
-
10
Generic directory service (for the EPICS tool set). Directory entries are channels with properties and tags. Applications can query a web service to retrieve channels based on wildcard matching on properties and tags, and manipulate the directory data. Code has been moved to GitHub at https://github.com/ChannelFinder
-
11
Command line utility for programming the internal flash in NXP arm processors using the ISP protocol in the built-in bootloader. Lots of processors are supported and it is easy to add more.
-
12
"RasPiNobot rev 0.1c" is a Debian Jessie distro optimized for ARM Raspberrypy. It wear a Remote Control System for a Virtual Presence Device or nobots
-
13
mpvscada
Another HMI/SCADA set of tools written in C++(Qt) with python bindings
HMI/SCADA software. Support Linux, Windows (cross operation) Source library for writing own control applications with Qt in C++/Python. -
14
Data logger, manipulator and visualizer. Receives data in CSV format from stdio.
-
15
capstone
Capstone disassembly engine
Multiple-arch, multiple-platform disassembly engine with advanced features -
16
Modbus Traffic Generator
Open Source SCADA Security Evaluation Tool
Modbus traffic generator is a tool written in Python, and uses Scapy libraries to evaluate the effectiveness of SCADA security solutions. The tool generates Modbus/TCP packets, where the characteristics of these packets are extracted from Snort NIDS Modbus rules. The generated packets trigger related alerts in Snort NIDS. It is useful to anybody interested in evaluating and testing their SCADA security solution or other people solutions. Requirements: * Python 2.x or higher * Scapy *... -
17
openfablab
Open Source FabLab Project
Software script assembly to be executed on cnc machines and robots to build, maintain and replicate open source fablab. Here software meets hardware. -
18
SZARP is a full-featured, open source (GPL) SCADA system for Linux. Client programs are available for Linux and Windows.
-
19
syphon is an extension for mod_openopc, to monitor telnet devices (serial devices) that sit on Serial -to- Ethernet bridges (such as barcode scanners) and export parsed data to an OPC compliant device (such as a PLC).
-
20
Cross platform (python 2.5) tool for exporting data via SMTP (email) to an Endress-Hauser Fieldgate DM3 Server. This tool may be used with any MySQL database historian, even though it was originally an extension for mod_openopc.
-
21
ubnhd2
A native, dual-bootable ubuntu for the HTC™ HD2 Phone (qsd8250 SoC)
ubnhd2 is a security and pentest focused ubuntu/debian system that runs natively on the HTC HD2 phone. To boot this you need the Magldr on your phone and the first FAT partition should be named "SD". The wifi drivers are not included check the Ubuntu HTC HD2 Section from forum.xda-developers.com/showthread.php?t=1975081 for more details. -
22
KSR10 USB Python controller
Control the KSR10 Robot Arm (Velleman) through USB with Python.
This project aims to control the KSR10 Robot Arm (Velleman) through USB with the programming language Python. Requirements: - Python (tested with version 2.6 and 2.7) - modules: pyusb (wich on itself requires libusb or openusb) -
23
OPyCua
OPC UA communication stack written in python
The goal of this project is to implement an OPC UA communication stack using the python programming language. Currently we are working on a series of articles, describing how we can use python to implement the communication stack. Some code snippets have already been written! -
24
3D tracking using wiimote
3D tracking of 4 IR LEDs using 2 wiimotes and python
This project is a part of a mini project required by the Mechatronics-2 course for the 4th year Mechatronics class in faculty of engineering Ainshams university. The mini project involves the control of an articulated robotic arm which resembles a human arm. The control is done via tele-manipulation which is done by the tracking of 4 IR LEDs fixed at the joints of the controller arm. This code is the part of the project responsible for the interfacing with the wiimote, stereo-triangulation... -
25
Flexible Alarms Creator
Create Wincc Flexible alarms from Data Blocks of Simatic Manager
This is an application for creating alarms and PLC tags for Wincc Flexible (Siemens HMI Software) from one or several Data Blocks (DB) of the Simatic Manager. The application creates two files that can be imported in Wincc Flexible.
