Search Results for "termux-boot"

...The web interface files are present in the data directory but UI has its own repository ESP3D-WEBUI. Use GPIO2 to the ground to reset all settings in a hard way, 2-6 sec after boot / not before!! Set GPIO2 to ground before boot change boot mode and go to special boot that do not reach FW. Currently, boot takes 10 sec - giving 8 seconds to connect GPIO2 to GND and do a hard recovery for settings. Complete configuration by web browser (Station or Access point) or by Serial/telnet commands.

...100% (parted) quit sudo resize2fs after finish For editing Swap Memory size : sudo nano /etc/dphys-swapfile change : CONF_SWAPSIZE=100 to : CONF_SWAPSIZE=1000 (for 1Gb swap memory) ctrl + x (for save) sudo reboot For make speed server Boot : wget zram.sh https://sourceforge.net/projects/raspbian-9-webserver/files/zram.sh sudo chmod +x zram.sh sudo ./zram.sh sudo sed -i 's#^exit 0$#sudo /home/pi/zram.sh#' /etc/rc.local; echo exit 0 | sudo tee -a /etc/rc.local Rasbian SSH: Username : pi Password : raspberry Webmin (Administrator Web Server): (https://localhost:10000) Username : pi Password : raspberry Phpmyadmin : (http://localhost/phpmyadmin) Username : root Password : raspberry

...Tramite interfaccia web è possibile gestire: Amministrazione del dispositivo (tramite WEBMIN) Stampanti (Tramite CUPS) Scanner (Tramite PHP Server Scanner) Accesso in ssh (tramite shell in a box) Caratteristica interessante è il fatto che è un server headless (quindi puo' essere operativo senza alcun monitor e tastiera). Anche la parte Wifi (SSID e Password) sono configurabili con un fiile di testo presente nella partizione di boot (che è in FAT32 e quindi modificabile anche da S.O. Windows). Una volta collegato alla rete il dispositivo è visibile tramite il nome raspberrypi.local (o raspberrypi)

moerAskip enables the user to save, edit and switch network profiles. These profiles will include ip address, dns, printer, samba, webserver, desktop apps etc. settings. As of version 0.3 moerAskip will run on all platforms.

Printer_on is a small program which gives you a warning if you printer is powered on. You can put it in your linux shutdown script, so you'll be notified if your printer is still powered on when you shutdown your computer.