Search Results for "hardware"

GeigerLog is a combination of data logger, presenter, and analyzer, and is now released in version 2.1! Based on Python (Version 3), it runs on Linux, Windows, Macs, Raspberry Pi, and other. GeigerLog is WiFi-enabled for servers and clients; it can be monitored by SmartPhone. Initially developed for Geiger counters, it is now a more universal tool, which equally well handles data like temperature, air-pressure, humidity, CO2. Continues to support Geiger counters like GQ Electronic's...

SeaBreeze is a device driver library that provides an interface to select Ocean Optics spectrometers. It is written in C/C++ and builds and runs on Windows (XP/7/8), MacOSX, and Linux (x86/x64/ARM).

...When put together with the AFM scanning hardware (sensor, scanner and their amplifiers) and user interface software it can serve as a standalone SPM system. Otherwise, it can serve as a sub-module for a custom built SPM system, e.g. providing the feedback loop mechanism only. Finally, it can be used as a board for developing advanced sampling techniques, which was the primary goal.

An SNTP client for Virtual PC. It is for machines that do not have a sane time and a working hardware RTC. It synchronize the system time frequently with a nearby NTP server. It uses settimeofday(). It is based on RFC 1769 and RFC 1305.

VibroToolbox is a tool for research and education in vibrometry. Test your audio equipment, describe responses to vibratory stimulation and analyze directionality. It works with precision i/o hardware or simple sound cards, various sensors and speakers.

Nanopuller by Konrad Pawlak and Janusz Strzelecki http://dx.doi.org/10.1016/j.ultramic.2016.01.008 http://www.biofizyka.fizyka.umk.pl/ Laboratory made AFM force spectroscopy setups were present in milestone single molecule experiments and there is a growing number of groups using such equipment even though the commercial setups are nowadays widely available. The ability to tailor the setup accordingly to particular application is an advantage that makes the effort necessary for...

A programmable signal generator and RF synthesizer for scientific experiments, especially quantum computing and quantum information processing. It includes hardware, firmware, software, and documentation, all under an open source license.

This software to turn a DSO Nano 201 into a Multi-Channel Analyzer for gamma spectrometry. Software is open source. Support and discussion are through the GammaSpectrometry group at http://tech.groups.yahoo.com/group/GammaSpectrometry/

This project is a protocol translator for the VFG-150 USB controlled Versatile Frequency Generator allowing control through a GPIB-style command language over the network. The language currently supports frequency steps, fast sweeps and gaussian pulses.

HOPSA, high oxygen pressure sputter automation, is a Python 3 project to control a step wise sample creation Process. Although written for this specific task it is easy to adopt for any experimental task which changes hardware parameters and waits for a specific condition before proceeding. The graphical interface (QT4) includes plotting (matplotlib), instrument configuration/monitoring and a program step creator. The communication with the hardware is independent of the GUI and any number of devices can be selected. To modify the code for any other task only the hardware interface needs to be redefined.

DArmstadt MAgnetic Resonance Instrument Software

Diamond is a confocal scanner written in python / Qt4. It combines an intuitive gui with flexible hardware abstraction classes. It is directed primarily towards quantum information processing (QIP) with single NV centers in diamond.

The GWO library is numerical calculation library for the diffraction integrals using a GPU (Graphics Processing Unit). If optics engineers and researchers have no knowledge of GPU, the GWO library provides them with the GPU calculation power easily.

The purpose of the Programmable Chip EEG BCI project is to create a EEG that is modernized with some of the latest hardware. The Design uses lower amplification and higher bit analog to digital converters to remove the need for filtering and amplifying.

MATLAB driver routines for the thermoluminescence apparatus using PT100 resistors as the heating and sensing elements described in the Review of Scientific Instruments v78, 083905 (2007). [DOI: 10.1063/1.2776972]

This library allows you to control a PMS (Particle Measuring Systems) Lasair II air particles counter. You can either use a COM component from several programming languages (Visual Basic, ...) or directly use its underlying Python class.

OpenPL is a software interface to physics hardware, defaulting to a software constraint solver to make use of the CPU in the absence of a hardware implementation such as Aegia PhysX processor or Nvidia's HavokFX SLI implementation.

open2300 - reads/writes data from the Lacrosse WS2300 family of weather stations. Includes tools that send data to: logfiles, webpages with graphs, XML file, MySQL, Weather Underground, Citizen Weather. Library of 50+ functions for your own programs (C)

Galileo-Data Acquisition System is a data acquisition system and development environment for laboratory automation.

The GDAC (Generic Device Access and Control) framework is an extensible multithreaded cross platform (Linux (x86,VME)/Windows) C++ device control environment. It typically will be used as the basis for custom OPC servers or front-end control software.

Mantis Robotic project consists of an open-source sets of reusable C/C++ libraries for manipulation of diverse kinds of robots, mostly for educational purposes and hobbies.

This project offers an uniformized way to interface a extented variety of analog-to-digital conv. chips to a computer that uses Windows. It is written in C as a set of plugin DLLs plus a central interface. The interface is intented to be VB compatible

Jhwctl provides a textgraphical user interface to access the LPT hardware port. [In the making: LPT/COM, FileTransfer, PCSP, VGA font, libSIOS/libTMET]

The JBlaster is a software driver that allows you to configure Altera's PLDs and FPGAs through the ByteBlasterMV in JTAG mode under Linux and Windows NT, interfaceing via the parallel Port. The JBlaster parses a Quartus II generated chain descriptio