Search Results for "using" - Page 2
Sort By:
Showing 135 open source projects for "using"
View related business solutions-
Outgrown Windows Task Scheduler?Windows Task Scheduler wasn't built for complex, cross-platform automation. Get a free diagnostic that shows exactly where things are failing and provides remediation recommendations. Interactive HTML report delivered in minutes.
-
AI-generated apps that pass security reviewRetool lets you generate dashboards, admin panels, and workflows directly on your data. Type something like “Build me a revenue dashboard on my Stripe data” and get a working app with security, permissions, and compliance built in from day one. Whether on our cloud or self-hosted, create the internal software your team needs without compromising enterprise standards or control.
-
1
QBlade
Wind Turbine Rotor Design and Simulation
QBlade 2.0 released!!!! QBlade 2.0 released!!!! QBlade 2.0 released!!!! This project page is discontinued, you find our new webpage at: https://qblade.org/ This project page wont be updated in the future, however, everything in the "Files" section and the Forum Content will remain avaliable to everyone... -
2
XMD is a program for performing molecular dynamic simulations on metals and some ceramics materials at the atomic scale. It models atomic energies and dynamics using user defined pair potentialsl, EAM potentials and some hard coded potentials.
-
3
Laser Kids
Homemade lasers and the braniac laboratory
...This site is devoted to the homemade lasers. And guides where it is described how to build them step by step. Any laser described in the guides can be build from scratch using only the common accessible resources. You won't need rare crystals, optics, mirrors or anything like this. On the other hand all lasers here are the demo of the concept. (Rather) cheap, quick-and-dirty mockups. Feel free to make for them proper housing and shining handles. My task is simple - to show that lasers ARE simple. Not less not more. -
4
Virtual Reflectometer
Simulates basic reflectometer scans with X ray tracing.
With Virtual Reflectometer (VR), you can simulate the basic alignment scans of a basic X ray reflectometer (diffractometer) with a Goebel mirror using ray tracing. With this program, you can characterize reflectometers and get a reflectometer-dependent overillumination correction for X Ray Reflectivity (XRR) scans. The pogram serves as an educational tool for explaining alignment and for a proper overillumination correction of XRR data. !!Paper will be referenced!!. VR can be run by code in Matlab or as a standalone app. ... -
Atera all-in-one platform IT management software with AI agentsAtera’s AI agents don’t just assist, they act. From detection to resolution, they handle incidents and requests instantly, taking your IT management from automated to autonomous.
-
5
'isotope' is a small command-line utility to calculate the isotope pattern for a given chemical formula. It allows to run calculations interactively, in batch mode, via the command line, or (using a webserver) via a web interface.
-
6
Gabedit is a Graphical User Interface for FireFly (PC-Gamess), Gamess-US, Gaussian, Molcas, Molpro, MPQC, NWChem, OpenMopac, Orca, PSI4 and Q-Chem computational chemistry packages.
-
7
F3DM
Finite Element Method on 3D Meshes
f3dmlib is a FEM library that can read, write and analyse 3D tetrahedral meshes, minimize a given functional, and refine the resulting meshes. The minimization is parallelized with OpenMP. Three main features in unstable 1.8.x version (available via GIT): quadratic elements, periodic boundary conditions, and the solver for scalar and electromagnetic wave equations. f3dmgeom is a collection of a few simple tools for creating surface meshes for tetgen. It can handle simple geometries only. -
8
htcontrol
controls high-temperature single-crystal XRD experiments using IPDSII
htcontrol is a software to control high-temperature single crystal XRD experiments on a STOE IPDS II or 2T diffractometer platform. A Manson SDP2210 power unit is needed as well as the ICP DAS I7019 data acquisition interface (amount of investment approx. 600 EUR). htcontrol is written in Perl and runs on a cygwin platform to be installed on the WinXP/10 host. Data collections are performed with Stoe's WinXpose (>=1.7.3) via the non-interactive XML interface. For details see: J. Appl.... -
9
easy-dhpsf
GUI for fitting 3D single-molecule images using the double-helix PSF
This package of MATLAB routines with accompanying GUI allows scientific users to measure the 3D location of single molecules when using the double-helix point spread function (DH-PSF) widefield microscope. Version 2 also includes code that facilitates combining localization data from two spectral channels using a locally-weighted quadratic 3D registration function Features - Double-Gaussian estimator is calibrated via an axial scan of bright immobile fluorescent emitters (e.g. beads) - DH localization is performed through template matching and subsequent double Gaussian fitting - Tiff stacks of SM images are analyzed using template matching followed by double-Gaussian fitting to extract estimates of the molecule positions - Two spectral channels are registered by generating a locally-weighted quadratic mapping function from control point pairs -
Total Network Visibility for Network Engineers and IT ManagersThis means every device on your network, and every interface on every device is automatically analyzed for performance, errors, QoS, and configuration.
-
10
This is a standalone program for a) the calculation of diffusion coefficients of sorbates inside nanoporous materials at different loadings by using transition rate constants and for b) solving the master equation for a system consisted of a large number of unit cells per each direction. It is based on the following published paper "Kolokathis, P. D., Braun, O. M.. J. Comput. Chem. 2019, 40, 2053– 2066. DOI: 10.1002/jcc.25857"
-
11
Xoptfoil
Airfoil optimization with Xfoil
Airfoil optimization using the highly-regarded Xfoil engine for aerodynamic calculations. Starting with a seed airfoil, Xoptfoil uses particle swarm, genetic algorithm and direct search methodologies to perturb the geometry and maximize performance. The user selects a number of operating points over which to optimize, desired constraints, and the optimizer does the rest. -
12
AnharmoniCAOS
Cagliari-Orsay model for anharmonic molecular spectra in 2nd order PT
Given dynamical coefficients and/or derivatives of the ionic potential with respect to normal (harmonic) vibrational modes, compute anharmonic energies and electric dipole-permitted transitions and intensities using nearly-degenerate perturbation theory (i.e. properly accounting for Fermi and Darling-Dennison resonances). -
13
QualityControlForRadiology
QC tests and patient doses from radiodiagnostic XRay equipment
This software performs various quality control tests for XRay devices used in radiography, mammography, fluoroscopy and CT such as: HVL/tube filtration, high voltage, exposure time, tube output, MTF calculations, film sensitometry, AEC devices and more. It also compute patient doses using an external program based on the GEANT4 simulation toolkit. This program is found here: https://sourceforge.net/projects/doseinhumanbody/ Read the "README" file for details. Source code and documentation included. Also, available on GitHub: https://github.com/ZiliasTheSaint/RadQC.git Check out for dependent module! -
14
RadiationHelper
Alpha, Beta, Gamma measurements and Nuclide exposure
RadiationHelper is a data analysis tool for : 1. gross alpha and beta radiation measurement and detector calibration using experimental data (counts acquired by alpha-beta devices). 2. gamma spectroscopy measurements and detector calibration using experimental data (spectra acquired by acquisition software such as Assayer, Gamma Vision, Maestro) 3. gross alpha,beta, gamma detector efficiencies and gamma peak efficiency can be theoretical computed using Monte-Carlo simulation technique for radiation transport (based on EGSnrc toolkit) 4.dose assessment in human body exposed to radiations from nuclides in several common scenarios such as air exposure, water submersion, ground surface, internal ingestion or inhalation. 5. quick dosimetry and shielding computations. ... -
15
Construct2D
COmputational fluid dyNamics STRUctured grid CreaTor for 2D airfoils
Construct2D is a grid generator designed to create 2D grids for CFD computations on airfoils. The grids are generated in Plot3D format. The only required input file is the set of coordinates defining the airfoil geometry, using the same format as XFoil, the popular vortex-panel code for airfoil analysis. Construct2D can create grids with O topology (recommended for airfoils with a blunt trailing edge) or C topology (recommended for airfoils with a sharp trailing edge). Now available in version 2.0: hyperbolic grid generation to create higher quality grids in a fraction of the time compared to elliptic grid generation. ... -
16
Acoustic Research Tool (ART)
Acoustic Simulation Library for Frequency and Time Domain Simulations.
...In the time domain generic bidirectional propagation elements, scattering elements, fractional delays, convolution with reflection functions and general z-domain networks are available and can be described using MuParserX expressions. Cylindrical and conical ducts can also be defined based on their geometry. Available models and their parameters can be enumerated and combined to form simulators for complex acoustical structures. Parameters can be specified symbolically by expressions containing other parameter values or global variables. ... -
17
UmUTracker
A MATLAB program for 2D particle tracking or 3D DHM based tracking.
We present a versatile and fast MATLAB program (UmUTracker) that automatically detects and tracks particles by analyzing long video sequences acquired by either light microscopy or digital holography microscopy (DHM). Our program finds the 2D particle center position using an isosceles triangle transform and the axial position by a fast implementation of Rayleigh-Sommerfeld numerical reconstruction algorithm using a one dimensional radial intensity profile. *Updates v1.1: 2017/11/21- Bug fix & Blob detection functions. Please visit our homepage for more information: http://www.physics.umu.se/english/research/biological-physics/the-biophysics-and-biophotonics-group/ *Please cite our work using the following information: Zhang, H., T. ... -
18
ATOMKI Common Data Acquisition
Nuclear physics data acquisition system
Nuclear physics data acquisition system. The suit of applications can be used to collect data from physics experiments using CAMAC/CAEN/VME devices. The system is quite specialized, but the code can still be useful for others doing something similar... -
19
Solar Off-grid System Designer (beta)
An offgrid solar photovoltaic project dimensioning and sizing tool
Solar Off-grid System Designer (Hybrid) is an offgrid solar photovoltaic project dimensioning and sizing desktop software for individuals, residential and small-scale commercial solar PV installers. This is a light weight version of popular PV software tools like PVsyst and PVSol. With classlesoft's latest offering, the users can easily design PV systems using intuitive and friendly user-interface. The current version of the tool only supports "Hybrid Solar Inverters". Users can store and use the datasheet information of solar panels and hybrid inverters of their choice. The software has inbuilt solar radiation database, which is sourced from most popular NASA SSE database. This enables users to design their projects completely offline. ... -
20
CvMob is an Open Source tool to automatic visual analysis of human movement. The software calculates the optical flow to generate data about trajectory, velocity and acceleration using low-quality videos. For more informations, please visit our website: http://www.cvmob.ufba.br/
-
21
datasw
datasw, a tool for rapid processing of HPLC-SAXS data.
...Beamline setups with inline high-performance liquid chromatography (HPLC) are particularly useful for accurate profiling of heterogeneous samples. The program DATASW performs averaging of individual data frames from HPLC-SAXS experiment using a sliding window of a user-specified size, calculates overall parameters (I(0), Rg, Dmax and MW) and predicts the folding state (folded/unfolded) of the sample. Applications of DATASW are illustrated for several proteins with various oligomerization behaviors recorded at different beamlines. If you use DATASW in your work, please, cite: Shkumatov A.V. & Strelkov S.V. (2015) Acta Cryst. ... -
22
Heat transfer in a bar and sphere
Heat transfer in a bar and sphere using finite differences.
Simulation of the heat transfer in a bar and a sphere (1D) using finite differences in Matlab. Authors: -Jheyson A. Mogollon R. - jheyson260@gmail.com -Luca Meinardo - lucameinardo@gmail.com -Angie Xiomara González - angiegduque@gmail.com Current Version: 2.0 Date: 30/05/2017 -
23
Advanced Numerical Instruments 3D
Advanced numerical instruments: adaptive meshing, FE methods, solvers
Ani3D provides portable libraries for each step in the numerical solution of systems of PDEs with variable tensorial coefficients: (1) unstructured adaptive mesh generation, (2) metric-based mesh adaptation, (3) finite element discretization and interpolation, (4) algebraic solvers. -
24
Spglib is a C-library written for finding crystal symmetry. Symmetry operation, space group, etc, can be obtained using this symmetry finder. It is easy to include this library to your code. For more information, See, http://spglib.sourceforge.net/
-
25
orthos
Simulation of EPR spectra of nitroxide biradicals
...NB: Please note that now (as of Nov 2016) the distribution is being updated so that to improve reliability, OS-universality, and the quality of documentation. If you have any troubles installing/compiling/using the software, please contact me. I would be glad to help.
