Search Results for "32-bit"

The Magnet-Valet contains a STMicroelectronics STM-32 NUCLEO-L432KC board attached to an Arduino nano expander board (V1.0) connected to a LCD Gfx-240x128 display of the Smart-LCD project of the same author.

ANNOUNCEMENT Project has moved to a proprietary website! http://www.instruman.it Updated source code available at https://instruman.codeplex.com/ This is an interface used to program and control Voltcraft DPPS-32-15 Power Supply, and to log data from Victor 86C Multimeter. It's an all-in-one solution to use the two instruments at the same time for Scientific, Research and Study purposes. Features avaible are the following: -Victor 86C USB HID connection protocol -86C data reading and logging -COM port selection -Continuous reading of Voltage and Current -Continuous logging of Voltage and Current in a Chart with the option to export data to csv file -Possibility to set logging rate from 50 ms -Turn ON and OFF instrument -Set Voltage and Current -Set a custom voltage loop to play and reiterate -Reiteration possible in three ways: for a fixed time, for a fixed number of cycles and until the STOP button is pressed

ACCORD is a C library for composition of scanning electron or helium-ion microscope images with correction of drift. It produces significantly more accurate images than the traditional imaging techniques and also provides drift trajectories.

Cooldt calculate the cooling duration of a multi-layers pipe in a cold environment. The duration to reach the “Final fluid temperature” or cool-down time (CDT) is calculated by solving the heat equation in cylindrical coordinates with a flux conservative formulation.

This is a user space driver to log data from PICO ADC 11/12 for Linux. It has been tested on Linux 32 and 64 and on Mac OS X based on Fink project. You find more information about PICO ADC 11/12 here http://www.picotech.com/discontinued/USB-ADC-11.html. This little driver is based on libusb-0.1 (legacy API) which you can find here http://www.libusb.org.

The purpose of the Programmable Chip EEG BCI project is to create a EEG that is modernized with some of the latest hardware. The Design uses lower amplification and higher bit analog to digital converters to remove the need for filtering and amplifying.