Search Results for "power"

The dynamics of the population of energy levels and the power of stimulated radiation in laser amplifying media is modeled by solving a system of rate equations. The application was developed for students to explain the time dependence of laser power they observed. The material constants of the active medium of the laser used are specified in the configuration file. The application allows you to interactively select the pump speed and quality factor of the resonator by observing the time dependencies of the inverse population and laser radiation power.

GridLAB-D is a new power system simulation tool that provides valuable information to users who design and operate electric power transmission and distribution systems, and to utilities that wish to take advantage of the latest smart grid technology. It incorporates advanced modeling techniques with high-performance algorithms to deliver the latest in end-use load modeling technology integrated with three-phase unbalanced power flow, and retail market systems. ...

htcontrol is a software to control high-temperature single crystal XRD experiments on a STOE IPDS II or 2T diffractometer platform. A Manson SDP2210 power unit is needed as well as the ICP DAS I7019 data acquisition interface (amount of investment approx. 600 EUR). htcontrol is written in Perl and runs on a cygwin platform to be installed on the WinXP/10 host. Data collections are performed with Stoe's WinXpose (>=1.7.3) via the non-interactive XML interface. For details see: J. ...

This software allows you perform six degree of freedom simulations of High Power Rocket (HPR) and model rocket flights. Parachute descent is also simulated. 3D flight trajectories are produced as well as detailed tabular flight data. Running in Monte Carlo mode allows generates multiple possible flight paths and splash down plots, indicating the probability of landing in an area. Peer-reviewed publication in the Journal of Open Research Software (JORS) http://doi.org/10.5334/jors.137 "Cambridge Rocketry Simulator – A Stochastic Six-Degrees-of-Freedom Rocket Flight Simulator"

PLEASE NOTE ORBKIT HAS BEEN MOVED TO https://github.com/orbkit/orbkit orbkit is a parallel Python program package for post-processing wave function data extracted from output files of MOLPRO (Molden File Format), TURBOMOLE (AOMix file format), GAMESS-US, PROAIMS/AIMPAC (wfn/wfx file format), and Gaussian (Output File and Formatted Checkpoint File) output files. Futhermore, an interface to cclib, a parser for quantum chemical logfiles, is provided. If you use orbkit in your work,...

ANNOUNCEMENT Project has moved to a proprietary website! http://www.instruman.it Updated source code available at https://instruman.codeplex.com/ This is an interface used to program and control Voltcraft DPPS-32-15 Power Supply, and to log data from Victor 86C Multimeter. It's an all-in-one solution to use the two instruments at the same time for Scientific, Research and Study purposes. Features avaible are the following: -Victor 86C USB HID connection protocol -86C data reading and logging -COM port selection -Continuous reading of Voltage and Current -Continuous logging of Voltage and Current in a Chart with the option to export data to csv file -Possibility to set logging rate from 50 ms -Turn ON and OFF instrument -Set Voltage and Current -Set a custom voltage loop to play and reiterate -Reiteration possible in three ways: for a fixed time, for a fixed number of cycles and until the STOP button is pressed

...Homeland Security Council lists the "Detonation of a 10 Megaton Improvised Nuclear Device" as "Scenario #1" among the top 15 threats to American security. Or, if you do not believe that a nuclear bomb is likely, what about all the Chernobyl-style Soviet-era nuclear power stations still in service? The point is: let us work together as free people to jointly report and track radiation levels around the globe. Information is power--and more importantly, information can save lives. This project is known to work on Raspberry Pi and various Linux distributions. Both PyRadMon and RadMon.org are completely free, though donations are always appreciated.

...Why this project If this project is so attractive is that it has a very strong double interest: - At First, the very subject of the project on tidal energy, which is one of the most interesting renewable energy for the future - Second, this project focuses on the potential energy in the French representing the places of possible locations of turbines on the French coast. Description of tidal energy The tidal energy consists of using the force and power obtained from waves and current. In our case, the principle is to place in current sea water turbines to obtained power. This source of energy is maybe the “best” for several reasons: - Ecological: no pollution (underwater, no emissions) - Economical: rentability very important quickly - Efficiency

Stopping power library based on PSTAR/ASTAR and MSTAR tables. Please note that this project will be superseded by the libdedx project. https://sourceforge.net/projects/libdedx/

Bike Power, calculates the power output and power consumption for bicycling.Given things like riding speed, body weight, hill grade, and wind speed it give you a table with power output and power consumption.

Software for simulating the flight path of high power rockets in six-degree-of-freedom. This software runs with Octave or Matlab and can simulate a wide range of scenarios including parachute recovery and multiple stage flights.

The GWO library is numerical calculation library for the diffraction integrals using a GPU (Graphics Processing Unit). If optics engineers and researchers have no knowledge of GPU, the GWO library provides them with the GPU calculation power easily.

Finds the cosmological power spectrum from a N-body simulation using the MPI FFTW library. May be run as a parallel computation for increased resolution. Reads in binary Gadget2 files.

For a given signal, pstool calculates a one-sided power spectrum, i.e. the portion of a signal's power falling within given frequency bins. This is done by employing a one-dimensional real-to-complex FFT routine on an MPI cluster.

Distributions Networks Analyzer (DNA) is a tool for simulating (power flow) and analyzing electrical distribution networks. Users can easily implement and test their own power flow, optimal power flow and control algorithms.

The mechSym toolkit is a set of classes that support modelling classical mechanics systems with particular interset in robotic designs. Classes simulate sensors, motors, mechanical linkages, and power. visual time-elapsed simulations provided.