Search Results for "fluid dynamics"

CFDTool - "CFD Simulation Made Easy" CFDTool is a fluid dynamics toolbox for modeling and simulation of flows with coupled heat transfer. Based on FEATool Multiphysics (https://www.featool.com), CFDTool is specifically designed to make advanced fluid mechanics and heat transfer simulations both easy and enjoyable. - Completely stand-alone and cross-platform self-contained toolbox - Optionally use as MATLAB Add-On toolbox - Fully integrated and easy to use MATLAB GUI - Modeling and simulation in 1D, 2D, 3D, and axisymmetric/swirl/cylindrical coordinate systems - Seamless OpenFOAM GUI and SU2 CFD solver integrations (https://www.featool.com/Easy-to-Use-OpenFOAM-GUI) - Built-in geometry and CAD tools - Automatic mesh and grid generation - Pre-defined equations and boundary conditions for: + Incompressible viscous fluid flows (Navier-Stokes equations) + Compressible, supersonic, trans-sonic, and turbulent flows + Heat conduction with conjugate heat transfer

RANSFOIL is a console program to calculate airflow field around an isolated airfoil in low-speed, subsonic, transonic or supersonic regime by numerically solving the Reynolds averaged Navier-Stokes (RANS) equations using mature computational fluid dynamics (CFD) method. As postprocess results, the aerodynamic parameters of the airfoil, e.g., lift coefficient and drag coefficient, can be integrated from the airflow distribution near wall boundary. In addition, the coupling between airflow and heat transfer and the effect of surface roughness on near wall flow are considered by this program, it can be used for engineering calculation of the friction drag and heat transfer coefficients on airfoil surface. ...

Elmer is a finite element software for numerical solution of partial differential equations and multiphysical problems. It includes models of structural mechanics, fluid dynamics, heat transfer, electromagnetics etc. Elmer home is www.csc.fi/elmer

Construct2D is a grid generator designed to create 2D grids for CFD computations on airfoils. The grids are generated in Plot3D format. The only required input file is the set of coordinates defining the airfoil geometry, using the same format as XFoil, the popular vortex-panel code for airfoil analysis. Construct2D can create grids with O topology (recommended for airfoils with a blunt trailing edge) or C topology (recommended for airfoils with a sharp trailing edge). Now available in...

...The engine is hidden entirely behind C++ classes, so that no OpenCL knowledge is required from application programmers. ASL can be utilized to model various coupled physical and chemical phenomena and employed in a multitude of fields: computational fluid dynamics, virtual sensing, industrial process data validation and reconciliation, image-guided surgery, computer-aided engineering, high-performance scientific computing, etc..

PRIN-3D (PRoto-code for Internal flows modeled by Navier-Stokes equations in 3-Dimensions) is a CFD code written in MATLAB, with turbulent and reactive capabilities.

Computational Fluid Dynamics (CFD) solver aimed to solve multi-physics problems on unstructured grids (inviscid Euler, Navier-Stokes flows, Heat transfer). F90 based. MPI, cgns, Metis libraries used.

Interactive mesh creation tool. Discretizer will create geometry and meshes for three dimensional flow simulations (CFD). Geometry import is not a goal: Discretizer will be furiously fast geometry builder(on many common engineering applications at least)

Sandia National Laboratories’ (SNL) environmental assessment modeling tool helps optimize the design of MHK-turbine array layouts within ocean, tidal, and river systems to balance energy generation efficiency with environmental considerations. The new tool, SNL-EFDC, is an augmented version of US EPA’s Environmental Fluid Dynamics Code (EFDC) and includes; (1) a new module that simulates energy conversion (momentum withdrawal) by MHK turbine-like devices including commensurate changes in the turbulent kinetic energy and turbulent kinetic energy dissipation rate, (2) new, advanced sediment dynamics routines, and (3) augmented water quality modules. ...

SLFCFD stands for San Le's Free Computational Fluid Dynamics. It is a package of scientific software and graphical user interfaces for use in computational fluid dynamics. It is written in ANSI C and distributed under the terms of the GNU license.

CFD scientific software. Provides simulation of 3D CFD problem based on Quasi-Gas Dynamics approach with radiation processes token into account. Lots of spectral intervals are considered. Parallel MPI/OpenMP-based implementation is provided.

CFD (computational fluid dynamics) software. Numerical 2d-solver for compressible ideal gases. Sophisticated turbulence and numerical approach which captures laminar-turbulent transition and aero-acoustic features.

LuaLB is an open-source parallelizable lattice Boltzmann simulation for computational fluid dynamics with Lua scripting.

Sound Propagation and Acoustic Radiation of Turbomachines - Aeroacoustic Noise Suppression Project : A CFD-like CAA code for predicting turbomachines noise.

HYP CFD is a structured, 3-D Navier-Stokes, MPI parallel multi-block computational fluid dynamics program for fluid thermophysics research, and high speed aerospace vehicle and propulsion applications.

OpenFlower is a free and open source CFD code (for Linux and Windows) mainly intended to solve the turbulent incompressible Navier-Stokes equations with a LES approach. It can deal with arbitrary complex 3D geometries with its finite volume approach.

Gerris is a tool for generic numerical simulations of flows (CFD), in geometrically complex geometries and including adaptive, multiphase and interfacial flows capabilities.

GRAnular Media Simulation in C++ using Molecular Dynamics. To be used in PhD work. The code will support: collision, electric dipoles (long range forces), intergranular fluid, and possibly MPI for parallel computing.

JRVFSim (Jarvis) is a simulator of a fluid dynamics phenomenon known as radial viscous fingering. Its main feature consists of taking jordan curves and simulating their evolution subject to various parameters. Includes a partial API for numerical methods

Hephaestus is a computational framework to be used for iterative solution programs, such as weather models or CFD applications. (Now in need of an administrator/developers).

Fluid Dynamics with Front Tracking

A simple object-oriented lattice-Boltzmann code for simulation of fluid dynamics with graphics.