Search Results for "32-bit"

The Magnet-Valet contains a STMicroelectronics STM-32 NUCLEO-L432KC board attached to an Arduino nano expander board (V1.0) connected to a LCD Gfx-240x128 display of the Smart-LCD project of the same author.

...Valtr et al., Scanning Probe Microscopy controller with advanced sampling support, HardwareX, Volume 15, e00451 https://www.hardware-x.com/article/S2468-0672(23)00058-5/fulltext It is based on a low cost FPGA board Red Pitaya and additional high bit depth AD and DA converters. When put together with the AFM scanning hardware (sensor, scanner and their amplifiers) and user interface software it can serve as a standalone SPM system. Otherwise, it can serve as a sub-module for a custom built SPM system, e.g. providing the feedback loop mechanism only. Finally, it can be used as a board for developing advanced sampling techniques, which was the primary goal.

The library provides an implementation of dimensioned values for Ada. Unit checks are made at run-time, if not optimized out by the compiler. SI and irregular measurement units are supported. Shifted units like degrees Celsius are supported too. Conversions from and back to strings are provided for all various irregular units. An extensive set of GTK widgets for dealing with dimensioned values is included, though use of GTK is not mandatory for the rest of the library.

ANNOUNCEMENT Project has moved to a proprietary website! http://www.instruman.it Updated source code available at https://instruman.codeplex.com/ This is an interface used to program and control Voltcraft DPPS-32-15 Power Supply, and to log data from Victor 86C Multimeter. It's an all-in-one solution to use the two instruments at the same time for Scientific, Research and Study purposes. Features avaible are the following: -Victor 86C USB HID connection protocol -86C data reading and logging -COM port selection -Continuous reading of Voltage and Current -Continuous logging of Voltage and Current in a Chart with the option to export data to csv file -Possibility to set logging rate from 50 ms -Turn ON and OFF instrument -Set Voltage and Current -Set a custom voltage loop to play and reiterate -Reiteration possible in three ways: for a fixed time, for a fixed number of cycles and until the STOP button is pressed

ACCORD is a C library for composition of scanning electron or helium-ion microscope images with correction of drift. It produces significantly more accurate images than the traditional imaging techniques and also provides drift trajectories.

...The overall simulation procedure (de facto a full 3D, an articulated-body simulaiton engine) is called: "Lagrangian Dynamics' New Flavour Simulations". It is delivered through sample-simulators relying on it. The modified falvour of the Lagrangian Dynamics here proposed is also a bit simpler to use and to understand than the original one. Of course it is all based on finite-differece derivatives, both oridinary and partial. The new flavour relies on my first theorem on Numerical Methods,and the 1 on numerical stability Hope this piece of software will be useful to many. For more info,visit homepage. I will provide detailed documentation on how to use the engine to implment simulations of most types of articulated bodies, soon. ...

Cooldt calculate the cooling duration of a multi-layers pipe in a cold environment. The duration to reach the “Final fluid temperature” or cool-down time (CDT) is calculated by solving the heat equation in cylindrical coordinates with a flux conservative formulation.

...When it needs to compute derivatives (Jacobian matrix, for example) it does that analytically, i.e. without using numerical methods. It's portable. It works on Windows and Linux 32 and 64 bit and Mac OS X 64 bit. It's open. It allows you to implement and embed your own algorithms (aka "solvers"). It's easy to use. It allows to export results to MS Excel and MATLAB. It's multilingual. It currently supports Englis and Russian languages. It's free. It's distributed under the Boost Software License.

This is a user space driver to log data from PICO ADC 11/12 for Linux. It has been tested on Linux 32 and 64 and on Mac OS X based on Fink project. You find more information about PICO ADC 11/12 here http://www.picotech.com/discontinued/USB-ADC-11.html. This little driver is based on libusb-0.1 (legacy API) which you can find here http://www.libusb.org.

The purpose of the Programmable Chip EEG BCI project is to create a EEG that is modernized with some of the latest hardware. The Design uses lower amplification and higher bit analog to digital converters to remove the need for filtering and amplifying.