Search Results for "x360ce-controller"

...Contact us at serpaeos.devers@gmail.com Buy me a coffee! :) https://bmc.link/serpaeosdeL System Requirments: *4 GB Memory *4GB minimum PATA Hard Disk connected to the master slot on the primary IDE controller. *x86 processor

This is a small library that allows comunicating with a Webasto (tm) W-Bus capable car heating system. Runs on Personal Computers or for embedded devices (slim design). Easily portable. Includes a Heater manager, heater controller program and more. The GIT repository (CVS is deprecated) also includes a control unit application to control W-Bus capable devices, a W-Bus compatible heater unit firmware application and a heater simulator for testing purposes. Also, a serial port loop back driver for linux is included to simulate OBD II K-Line adapters.

...Don't use SourceForge anymore for this code. can4linux is an universal Linux device driver for ISA or PCI interface boards with CAN interface and embedded CAN controller solutions. Based on the API provided by can4linux commercial protocol stacks for CANopen, J1939 and DeviceNet are available. A first PCI board with an FPGA based CAN FD controller is supported (TARGET=IXXAT_IB500) in the CAN FD ISO mode but also non-ISO

OCP - Open Controller Platform is software platform that makes it easy to build a cross-compilation toolchain with C compiler, assembler, emulator and programming tools for embedded micro corntroller systems.

The goal of this project is to develop a block I/O bandwidth controller on Linux.

Linux driver for the Prodikeys PC-MIDI USB keyboard. The PC-MIDI is a combination Qwerty/Multimedia/Musical Keyboard.

This utility is used to format floppy disks. It replaces fdformat, and supports both floppy-controller drives and LS-120 (Superdisk) ATAPI-IDE drives.

Device Driver for the ACS USB servo controller (USBB-01 interface card). HID class USB device to contoll eight RC type servos, eight optically isolated current inputs and 8 current sink outputs.

This is a port of the uClinux to Samsung 4510b(ARM7TDMI) network controller unit. It will need bootloader, bsp, kernel and device drivers.

This project is developing the infrastructure for PCI Hot Plug, including some minor 2.4 kernel changes and a driver for the Compaq PCI Hot Plug Controller.

A driver for USB devices that use the KL5KUSB101 USB to Ethernet 1-Chip Controller. Written for the Netgear EA101.

Linux/FreeBSD device-driver for the ISA PC-CAN Interface PC-I 03. The interface uses a PCA82C200 Stand-alone CAN-controller by Philips Semiconductors.