Search Results for "router linux"

ipt-netflow is high performance NetFlow exporting module for Linux kernel (up to 4.15). Designed for Linux router in high-throughput network. This is netfilter/iptables module adding support for -j NETFLOW target. Designed to work efficiently w/o conntrack. Supporting NetFlow protocols v5, v9, and IPFIX. Accounting for IPv4, IPv6 traffic, and NAT translation events (NEL). Additional options is SNMP-index translation rules, aggregation rules, Ethernet type, MPLS, VLAN, and MAC addresses exporting.

The WRT54GL Tarifa enhanced firmware. Linksys WRT54G/WRT54GS models V1 to V4 and the WRT54GL V1.x This Third Party Firmware is functionaly the same as the original, the improvements are to make this router more scaleable, by increasing the capacity.

This project has been modified amd now is ISP Manager . This is working on linux , and make the life of isp administrator easy like never cod be .

Software system for FlowScreen Router, with SempGate FPGA firmware and Intel EP80579 based board, it implements a high performance (1.5M pps network traffic) router system with open architecture for 3-rd party network application development.

arlinux is a mini-linux (floppy) distro for Recovery o Router/Firewall purpose. Realname is Advanced (Router/Recovery) Linux

Q5 is a complete fully open linux based router / network appliance, including hardware. It supports up to four wireless minipci cards and two 10/100 Mbps NICs. The hardware is build around AMD's AU1500 MIPS processor, running at 264 MHz.

SIPatHome was based on the SIP Express Router (SER) which is a well-tested, configurable, free and RFC3261-compliant SIP proxy. The project was providing VoIP server software for the embedded Linux distribution OpenWRT on affordable Linksys WRT hardware.

A replacement firmware distribution for the 3com 3CRADSL72 a.k.a 3com wireless 11g (distributed by Ya.com) and its identical twin, the SMC7804WBRA, with an ucLinux kernel based system and associated system tools.

Hardware Recycling Initiative (HRI) is an open source project with goal to port Linux (or its microcontroler clone - ucLinux) into publicly available residential router hardware such as SMC7004 , DI604 and similar.

Linux as an Internet IntServ architecture element. - RSVP-capable router (ISI RSVP based). - EDF, RC-EDF, DC-EDF queues.

Mini OpenBSD Router/Firewall/Gateway with openssh, altqd, pfctl (firewall+nat), routed, snmpd, oidentd, simple shell menu config,multi user & wireless support. Fit on 8MB flashdisk & 24 MB ram.

A mini -- WCCP enabled using Transparent Proxying with Squid -- Linux distribution intended to cooperate with Cisco router.

Frame Diverter is mainly used for setting up a bridge with Squid running on it and transparently caching Web traffic between the LAN and the router. It's beeing extended to allow forwarding frames to other machines. It also allows layer 3+ switching