Search Results for "scientific"
Sort By:
Showing 43 open source projects for "scientific"
View related business solutions-
Train ML Models With SQL You Already KnowBuild and deploy ML models using familiar SQL. Automate data prep with built-in Gemini. Query 1 TB and store 10 GB free monthly.
-
Paessler - Monitor Your Whole Network in MinutesWaiting weeks for a monitoring rollout isn't an option when infrastructure doesn't stop running. PRTG's auto-discovery scans your network and suggests from over 200 pre-configured sensor types, so you're watching servers, applications and devices within minutes, not after a multi-week deployment. Enterprise-strength monitoring, without the enterprise complexity. Start your free trial today.
-
1
newRPL
The classic RPL programming language reimplemented and reimagined.
This project reimplements from scratch the RPL language made popular by HP programmable calculators, in portable C/C++. The main goal is to release a complete computing environment for various targets. There's currently 4 active targets: the HP 50g, HP39gs and HP40gs calculators and a PC simulator (see the downloads section!). Other ports are planned for the future. -
2
This project delivers Linux support (USB driver and Tools) for a Digital Signal Processor (DSP) cards of the Signal Ranger series, see http://www.softdb.com/product_dsp.shtml for details) connected to a Linux host via USB.
-
3
COFILOS
A Development Framework for Coldfire
Contains a framework for Coldfire MCUs like 52254. The framework supports a Command Line Interface (CLI) that may work from Serial port, USB or ENET. The framework uses Processor Expert and IDE requirement is MCU Eclipse 10.4 from Freescale. Includes the FunkOS Realtime Operating System by Funkenstein Software Consulting, available at http://funkos.sourceforge.net Mainly it is a support package for the development board Perseus, but I have ported also the RTOS to MCF52233DEMO... -
4
CMAKE build enviroment for CMSIS MCUs
CMAKE build enviroment for LPC2000 and LPC17xx Cortex MCUs
The goal of project is to build CMSIS like environment for LPC2000 series MCU and to write RTOS for LPC2000 and Cortex Microcontrollers -
Custom VMs From 1 to 96 vCPUs With 99.95% UptimeLive migration and automatic failover keep workloads online through maintenance. One free e2-micro VM every month.
-
5
A Disk Scheduling Simulator tool. With an intuitive GUI interface and command line functionality. Built using both VC and VB. Currently supports SSTF,LOOK,CLOOK,SCAN and CSCAN algorithms. Rotational latency is also optionally supported.
-
6
PROS
Custom firmware and IDE for the VEX Cortex Microcontroller
This project has been moved to http://pros.cs.purdue.edu/ PROS is a lightweight and fast alternative operating system for the VEX Cortex Microcontroller. It features multitasking, low-level control, and Wiring compatible functions to harness the full power of the Cortex. With a real-time kernel based on FreeRTOS and a development environment built on Eclipse CDT, PROS uses proven software to increase the reliability and usability of the VEX development system across all three major... -
7
nxtOSEK is an RTOS for LEGO Mindstorms NXT. nxtOSEK consists of I/O driver part of LEJOS NXJ, TOPPERS/ATK1 RTOS, and glue code for them. You can write applications for NXT in ANSI-C/C++. Check nxtOSEK site: http://lejos-osek.sourceforge.net
-
8
LinuxCNC controls CNC machines. It can drive milling machines, lathes, 3d printers, laser cutters, plasma cutters, robot arms, hexapods, and more.
-
9
A base for programs. Includes algorythms for Q-learning and SOM's etc. too. Examples: Hamron: Simulates evolution, uses the 2D-renderer. DriveUnit: created for school, for a robotic arm, uses the 3D-renderer. Hlearn: http://www.sagenb.org/home/pub/8
-
Host LLMs in Production With On-Demand GPUsDeploy your model, get an endpoint, pay only for compute time. No GPU provisioning or infrastructure management required.
-
10
This project introduces a kernel module "dnburstyloss" to enable dummynet emulate bursty packet loss by integrating some common theoretical loss models into Dummynet.
-
11
Roundhouse is a pair of C based embedded software applications to drive model railroad stepper motor based turntables. It consists of a stepper motor code and controller code connected by an I2C network. Written in C for PIC18/PIC16s processors.
-
12
TinyOS is an operating system for embedded sensors and networks. Versions 2.0 and later of TinyOS should be downloaded from www.tinyos.net.
-
13
Various microcontroller projects and embedded firmware. Assembly language and C source code. Schematics for hardware and board layouts. Embedded tools. Microchip PIC. Biotech automated instrumentation. Perl scripts. By Jonathan Cline at 88proof.com
-
14
The CodeTime platform covers every aspect of parallel software from authoring, through distribution, to run-time. Its goals are: high programmer productivity; write once, run high performance anywhere; and wide acceptance.
-
15
lysis is working on a features rich home automation system that ranges from CAN-bus, 1-wire and RF up to a HTPC; both hardware and software are addressed to make the really smart home; the domotics will provide energy saving, comfort, flexibility, safety
-
16
uGNU/RTOS (literally "micro G'Noo RTOS") is an Open Source serial Real Time OS for microcontrollers (PIC, ATMEL).
-
17
AVRCNC is a CNC-Controller based on an ATMega8 and some other (cheap) hardware. Main advantages compared to L297+L298 are: - simpler to build - easier to expand - mega8 controlls motors directly - no time-critical tasks on PC
-
18
FabBSD
4.4BSD-based UNIX-like operating system for CNC / machine control
4.4BSD-based UNIX-like operating system for CNC / machine control applications. Using low-cost hardware, FabBSD can be used to control a wide array of CNC milling machines, lathes, routers, process-control and automation equipment. -
19
SNOW Board is come from [Suck and NO Warranty Board](Well,At least,For alpha version)This board will has Atmel-AT91SAM9261 as MPU,Touch panel as interface.Expansion hardware board can be adding later.uClinux,T-engine,TOPPERS will running on this.Lets Fun
-
20
LifoBot is a simple robot built from scratch using a Gumstix embedded system. It is controlled via bluetooth and is able to move exploiting two engines. This is a didactic project designed for people wanting to learn something new.
-
21
This project aims to develop a prototype system that explores how we should re-invision computer system design based on changes in how people get the software that they run, as well as advances in static analysis of software.
-
22
Project Daedalus is an aim to bring Artificial Intelligence to the Machintosh Operating System (Mac OS X) to aid the user
-
23
-
24
iROS is a meta-operating system for technology-rich "interactive rooms". The core components (Event Heap, DataHeap, iCrafter) provide communication, data storage, and service management for an iRoom.
-
25
Device Driver for the ACS USB servo controller (USBB-01 interface card). HID class USB device to contoll eight RC type servos, eight optically isolated current inputs and 8 current sink outputs.
