Search Results for "robotics"

A scheme (lisp) interpreter written in ARM assembly language (currently: Cortex-M4F,M7, Cortex-A5,A8,A9, Cortex-A53; previously:ARM7TDMI, ARM920T, Cortex-M3) for education, robotics, wearable devices. Tested on Allwinner A64, Amlogic S905, Atmel SAMA5D4, SAME70, SAMV71, NXP LPC4300, RT1050, iMX8M, Samsung S5P6818, ST STM32F4, STM32F7, and TI AM3359, OMAP3530, DM3730, OMAP4430, TM4C1294 chips (previously: NXP LPC-1300,1700,2000, ATMEL AT91SAM7, STM STR711, STR911, STM32, CIRRUS EP9302, LMI LM3S1968, TI OMAP).

This project has been moved to http://pros.cs.purdue.edu/ PROS is a lightweight and fast alternative operating system for the VEX Cortex Microcontroller. It features multitasking, low-level control, and Wiring compatible functions to harness the full power of the Cortex. With a real-time kernel based on FreeRTOS and a development environment built on Eclipse CDT, PROS uses proven software to increase the reliability and usability of the VEX development system across all three major...

Advanced Real-Time Linux (ART-Linux) is a hard real-time kernel developed with robotics applications in mind. Real-Time is accessible from user level and does not require special device drivers. 10 micro-second periodic execution is possible on a PII

nxtOSEK is an RTOS for LEGO Mindstorms NXT. nxtOSEK consists of I/O driver part of LEJOS NXJ, TOPPERS/ATK1 RTOS, and glue code for them. You can write applications for NXT in ANSI-C/C++. Check nxtOSEK site: http://lejos-osek.sourceforge.net

LinuxCNC controls CNC machines. It can drive milling machines, lathes, 3d printers, laser cutters, plasma cutters, robot arms, hexapods, and more.

lysis is working on a features rich home automation system that ranges from CAN-bus, 1-wire and RF up to a HTPC; both hardware and software are addressed to make the really smart home; the domotics will provide energy saving, comfort, flexibility, safety

uGNU/RTOS (literally "micro G'Noo RTOS") is an Open Source serial Real Time OS for microcontrollers (PIC, ATMEL).

AVRCNC is a CNC-Controller based on an ATMega8 and some other (cheap) hardware. Main advantages compared to L297+L298 are: - simpler to build - easier to expand - mega8 controlls motors directly - no time-critical tasks on PC

4.4BSD-based UNIX-like operating system for CNC / machine control applications. Using low-cost hardware, FabBSD can be used to control a wide array of CNC milling machines, lathes, routers, process-control and automation equipment.

LifoBot is a simple robot built from scratch using a Gumstix embedded system. It is controlled via bluetooth and is able to move exploiting two engines. This is a didactic project designed for people wanting to learn something new.

Maiden-core is a Linux kernel robotics API module, extensible in Erc. The Maiden Project also documents and develops the Maiden architecture for mobile robots, a set of (optional) designs and standards for robots using the Maiden-core API.

The objective of the project is to provide a flexible, full working Linux distribution for Broadcom 6435 chip based ADSL routers (some examples are US Robotics 9105/9106, Siemens SE515, Dynalink RTA230, Buffalo WMR-G54 and Inventel DW 200).

Linux kernel drivers for a 104-DIO-48S and multiple Polaroid sonar sensors.

leJOSUnit is a port of the Java based JUnit framework for testing robotic programs with a very small footprint. leJOS is a Java based replacement firmware (OS) for the LEGO Mindstorms RCX brick that comes with Lego\'s Robotics Invention System.

A really low footprint (< 10 Kb) Java VM and replacement firmware for the Lego Mindstorms RCX microcontroller, which is part of Lego's Robotics Invention System. TinyVM is the progenitor of <a href="http://lejos.sourceforge.net">leJOS</a>.

beetleOS is a small and flexible real time OS for embedded systems with preemptive multitasking. It also provides a lightweight device-driver framework. It is basically programmed for the ARM7 processor architecture but it could be ported to other archit