Search Results for "controller"

...Contact us at serpaeos.devers@gmail.com Buy me a coffee! :) https://bmc.link/serpaeosdeL System Requirments: *4 GB Memory *4GB minimum PATA Hard Disk connected to the master slot on the primary IDE controller. *x86 processor

This is a small library that allows comunicating with a Webasto (tm) W-Bus capable car heating system. Runs on Personal Computers or for embedded devices (slim design). Easily portable. Includes a Heater manager, heater controller program and more. The GIT repository (CVS is deprecated) also includes a control unit application to control W-Bus capable devices, a W-Bus compatible heater unit firmware application and a heater simulator for testing purposes. Also, a serial port loop back driver for linux is included to simulate OBD II K-Line adapters.

...Don't use SourceForge anymore for this code. can4linux is an universal Linux device driver for ISA or PCI interface boards with CAN interface and embedded CAN controller solutions. Based on the API provided by can4linux commercial protocol stacks for CANopen, J1939 and DeviceNet are available. A first PCI board with an FPGA based CAN FD controller is supported (TARGET=IXXAT_IB500) in the CAN FD ISO mode but also non-ISO

OCP - Open Controller Platform is software platform that makes it easy to build a cross-compilation toolchain with C compiler, assembler, emulator and programming tools for embedded micro corntroller systems.

Roundhouse is a pair of C based embedded software applications to drive model railroad stepper motor based turntables. It consists of a stepper motor code and controller code connected by an I2C network. Written in C for PIC18/PIC16s processors.

The goal of this project is to develop a block I/O bandwidth controller on Linux.

Linux driver for the Prodikeys PC-MIDI USB keyboard. The PC-MIDI is a combination Qwerty/Multimedia/Musical Keyboard.

This utility is used to format floppy disks. It replaces fdformat, and supports both floppy-controller drives and LS-120 (Superdisk) ATAPI-IDE drives.

AVRCNC is a CNC-Controller based on an ATMega8 and some other (cheap) hardware. Main advantages compared to L297+L298 are: - simpler to build - easier to expand - mega8 controlls motors directly - no time-critical tasks on PC

Focus of this project is the development of an microcontroller/FPGA evaluation board. Basic characteristics as given below: - Philips LPC 22xx controller - additional FPGA, Xilinx Spartan - SD-Card interface for booting - additional IO-interfaces

Device Driver for the ACS USB servo controller (USBB-01 interface card). HID class USB device to contoll eight RC type servos, eight optically isolated current inputs and 8 current sink outputs.

This is a port of the uClinux to Samsung 4510b(ARM7TDMI) network controller unit. It will need bootloader, bsp, kernel and device drivers.

This project is developing the infrastructure for PCI Hot Plug, including some minor 2.4 kernel changes and a driver for the Compaq PCI Hot Plug Controller.

A driver for USB devices that use the KL5KUSB101 USB to Ethernet 1-Chip Controller. Written for the Netgear EA101.

Linux/FreeBSD device-driver for the ISA PC-CAN Interface PC-I 03. The interface uses a PCA82C200 Stand-alone CAN-controller by Philips Semiconductors.

PureEnergy is an organized file manager for SuperWikia Super Controller reactors which provide fluent access of each reactor's Sadeic files and other components of the native Super Controller Codec partitions. PureEnergy features IDE & SDK utilities.