Open Source Python Networking Software - Page 4

KeexyBox allows you to do parental control, block ads, limit telemetry, and browse the Internet anonymously from your home network without installing any software on your devices. It also can be used to create a public wireless access point with the captive portal. It is a software program which requires a Raspberry PI box and which is installed on Raspbian. It constitutes a cut-off point between your devices (computers, tablets, smartphones, etc.) and your router or Internet box. KeexyBox acts as a default gateway and DNS server for the devices in your home network. It thus intercepts all connections to the Internet to carry out website filtering or to activate browsing via the Tor anonymity network according to connection profiles which you have configured.

Linux Mobile System is a full Linux system within a USB Flash Memory Drive. This system will be able to boot from any i386 based PC, so we can to run a lot of utilities: network diagnostic, disk diagnostic, administration terminal, etcetera.

QOS is a monitoring system. It can monitor Cpu, Disk, Memory, etc. on a large number of hosts (300+). It can also monitor web sites, DNS, and other network services, and can generate reports from the collected monitor data.

Automated exploitation tool for SSH and RDP

Switzerland is a tool for testing networks, ISPs and firewalls developed by the Electronic Frontier Foundation (www.eff.org). It will spot IP packets which are forged or modified between clients, inform you, and give you copies of the modified packets.

Tftpy is a TFTP library for the Python programming language. It includes client and server classes, with sample implementations. Hooks are included for easy inclusion in a UI for populating progress indicators. It supports RFCs 1350, 2347 and 2348. Proje

Originally written by Paul Vixie in 1986 and distributed through mod.sources, "display" is a program which will repeatedly execute a command and display the output through curses. The purpose of this project is to maintain and extend display.

Image of OpenWrt OS, with snort community featured in, for Raspberry Pi 4/ 4B+ and 400, basically for Processor BCM2711. Installed Snort Community Model to Intrusion Detection system. Prevention system not installed. eth0 used as output/ LAN socket, to run internet and access router. eth1, which can be USB -> Ethernet port, is used as WAN port, to connect Pi board to Internet IP. to flash img file, you can restore in SD card, or use Balena Etcher to flash. or you can use DD commend of UNIX. **USERNAME** - root **PASSWORD** - bing.google12

EYE [1] is a reasoning engine supporting the Semantic Web layers [2]. It performs controlled chaining and it supports Euler paths [3]. Via N3 [4] it is interoperable with Cwm [5]. [1] http://eulersharp.sourceforge.net/README [2] http://www.w3.org/DesignIssues/diagrams/sweb-stack/2006a [3] http://mathworld.wolfram.com/KoenigsbergBridgeProblem.html [4] http://www.w3.org/TeamSubmission/n3/ [5] http://www.w3.org/2000/10/swap/doc/cwm

This is a collection of various check scripts for the Nagios or Check_MK monitoring system. At the moment, most of the scripts are for the Windows operation systems. Scripts for other platforms are planed and will be added shortly.

This software is a designed to log network ping status over a network . as well as monster bandwidth Usage on Cisco devices, Linux and Windows Devices developed this to debug issues in my and my clients networks. If you have trubble installing please mail me on weerakoon123@gmail.com UPS logger for Prolink and other Similer ups with USB Link Note : Fixed msome miner bugs. every thing should work now :P dashboard was broken before

justniffer is a TCP sniffer. It reassembles and reorders packets and displays the tcp flow in a customizable way. It can log network traffic in web server log format. It can also log network services performances (e.g. web server response times) and extract http content (images, html, scripts, etc)

Implement a powerful iSCSI target in python, easily use under most popular systems. It also includes the following features: multi-target, multi-connect/session support chap authentication support header & data digest support erl =2, VTL, etc...

Proxy Tester is a proxy list tester and then it generates a wpad.dat file you can use for your browser based on working servers. wpad.dat file selects a random proxy server from the list of provided working proxy servers with each connection request.

Python module for the libpcap packet capture library, based on the original python libpcap module by Aaron Rhodes.

BlueLogger is built using the Python programming language in order to monitor for Bluetooth devices nearby. The application can log the "Time", "Device Name" and "Device Address" of each discovered device.

INFORMATION This program can be used for the following: - To collecting Cisco device information like: hostname, serial, model, IOS image, version, uptime, free memory (to CSV) - To enable the SCP service on the device (automaticly before file transfers) - To make a backup of the running-config and startup-config with SCP (with built-in MD5 hash comparison check) no TFTP/SFTP server needed. - To save the running-config to the startup-config (write memory) - To transfer a new image to the device with SCP (with built-in MD5 hash comparison check) - To change the boot target to the new image (boot system flash:/) It has got the following features: - Error handling - information and error logging to log file (Log will be appended) - information and error logging to CSV file (Log will be overwritten each run) - Transfers retry 3 times - MD5 checks after file transfers to be sure the file is transferred without problems

DJ Py is a jukebox daemon, who lets you rate your songs and crossfades between them. If you dont want to constantly supervise your xmms, this is the solution

This ESL management system incorporates the electronic shelf labels and the ESL management software. The ESL management software enables you to manage your electronic shelf labels. It accomplishes this by maintaining a database with the credentials of each ESL and the last image that was sent to it. When you choose the image to be displayed on the ESL and hit the "Send Image To ESL" button, the software encrypts that image, sends it to the specified ESL over Wi-Fi using the UDP protocol, and then saves it to the database. An electronic shelf label is a device that displays relevant product information, they're usually attached to the front edge of retail shelving. A typical ESL consists of a display and a simple microcontroller that controls the display. *V2.0 now supports ESP32 CYD You can learn more on: Github: github.com/Northstrix/Electronic-Shelf-Label-Management-System Instructables: https://www.instructables.com/DIY-Electronic-Shelf-Label-Management-System-V20/

GGI stands for "General Graphics Interface", and it is a project that aims to develop a reliable, stable and fast graphics system that works everywhere. We want to allow any program using GGI to run on any platform requiring at most a recompile.

MV3D is an open source virtual world simulation framework written in Python. It was designed with scalability in mind and aims to be able to distribute a world across as many servers as needed while dynamically balancing the load.

This is a simple Port Flooder written in Python 3.2 Use this tool to quickly stress test your network devices and measure your router's or server's load. Features are available in features section below. Moihack DoS Attack Tool was the name of the 1st version of the program. Moihack Port-Flooder is the Reloaded Version of the program with major code rewrite and changes. Code is much smaller in size now - from about 130 pure lines of codes to 35 lines only. To run it you must have Python 3.2 or newer installed.Tested this on Windows,but guess it will work in Linux also,since there are not any OS specific lines in the code. This tool was only written for personal tests and usage! It was NOT written to DDoS other people and/or cause harm to hardware.I am NOT responsible for any kind of damage you make by using this software. If you want to reach me, contact me at moihack.inside@gmail.com

MrFish is a powerful tool designed to automate the creation of fake account submissions for phishing tests and vulnerability assessments. With the ability to generate random usernames, passwords, and even credit card data, it simulates real user behavior to help test the security of online forms. Featuring customizable settings for proxy support, user inputs (email or username), and multiple threads for speed, MrFish provides an efficient way to stress-test web servers and form-handling systems. It's ideal for security researchers looking to automate the process of probing online platforms for vulnerabilities while maintaining anonymity. Please use responsibly and ensure compliance with all applicable laws and ethical guidelines when using MrFish for testing purposes.

DEPRECATED!!!! VARIIYAS-NETMETER is a software that monitors the 'Bandwidth' usage in Linux operating system.The software gives the amount of data transfer in every session.Monthly usage of Bandwidth can be monitored.

The Netbios Share Samba Scanner scan C classes and reveal all open shares. It will tell you all the information and even show the content of the shares. It will also show you shares that are not accessible.Also provide a username and password to it. To know more about SecPoint IT security solutions visit us at www.secpoint.com