Search Results for "stack"

...The app presents a clean, intuitive UI where users can define rules based on process names, IP addresses, ports, and protocols, making it possible to restrict apps from accessing the internet or control specific traffic flows with fine granularity. Because simplewall leverages WFP directly, it operates at a low level in the network stack, ensuring reliable enforcement of rules system-wide while remaining lightweight. It also includes optional modes like blocking all inbound or outbound traffic except what’s explicitly allowed, and supports temporary rule application, logging, and diagnostic views to help users understand what traffic is being blocked or permitted.

...It implements BGP, OSPF, RIP, IS-IS, PIM, LDP, BFD, Babel, PBR, OpenFabric and VRRP, with alpha support for EIGRP and NHRP. FRR’s seamless integration with native Linux/Unix IP networking stacks makes it a general-purpose routing stack applicable to a wide variety of use cases including connecting hosts/VMs/containers to the network, advertising network services, LAN switching and routing Internet access routers, and Internet peering. FRR has its roots in the Quagga project. In fact, it was started by many long-time Quagga developers who combined their efforts to improve on Quagga’s well-established foundation in order to create the best routing protocol stack available. ...

IpWay/HOST is a real time tcp/ip stack library designed for embedded applications on 32bit microcontrollers ARM and PPC based (STM32Fx, SPC56x, SPC57x, SPC58x), where execution efficiency and compact code are important requirements. IpWay/HOST is characterized by high portability, compact size, copyless feature (also for TCP applications) and Checksum offload. Moreover, IpWay offers a 100% compatibility with AUTOSAR MCAL versions 4.13 and 4.2.x.

...Works with AVR ATmega256/128/103, AVR32, SAM7X, SAM7S(E), SAM9, AT91X40, GameBoy Advance, Cortex M3 / M4 (STM32, NXP LPC, LM3S), Freescale Coldfire, RTL8019AS, LAN91C111, CS8900 and DM9000E chips. Offers a tiny TCP/IP stack including HTTP, FTP and DHCP.

This is a Dynamic C port of the BACnet stack at http://sourceforge.net/projects/bacnet. This BACnet library provides a BACnet application layer, network layer and MAC layer communications services for systems based on the Rabbit 4000, 5000 and 6000 processors. The rich feature set of the BACnet stack provides an ideal platform for developing Rabbit based control devices which can use the many BACnet tools out there to reduce the development time and effort.

openPOWERLINK is an Open Source Industrial Ethernet stack for communication in hard real-time. It can be operated as both, Managing Node (master) and Controlled Node (slave). With version 2.0, the source code has been cleanly split into an application-oriented user library and a time-critical stack driver. The latter may be moved to a dedicated communication processor or into a kernel module to deliver enhanced performance while still keeping the API in user space. ...

Open-Source BACnet Protocol (see www.bacnet.org) stack for Linux. This project's goal is to develop a complete implementation of the BACnet protocol for use by anyone who wishes to give their products BACnet communication capability.

TOFFEE-DataCenter is the new TOFFEE variant meant for Data-Center, Server, HPC, Load Balancing, Cluster/Cloud Computing and SDN deployments. With TOFFEE-DataCenter (and or TOFFEE), OEMs and other equipment vendors can make use of this platform/stack, integrate, port and build WAN Optimization devices/appliances on to their existing product range. Or build a dedicated WAN Optimization hardware product series via the same.

RTnet is a hard real-time network protocol stack for the real-time Linux extensions Xenomai and RTAI. It makes use of standard Ethernet, including gigabit. Ethernet-over-1394 support is available based on the RT-FireWire protocol stack.

IEEE 802.15.4 networkong stack covers PHY and MAC layers (PHY layer implemented in hardware and MAC optionally implemented in software). Also 6lowpan (IPv6 packet encapsulation) is implemented for use by IEEE 802.15.4 and BT LE networks. Note: due to licensing restrictions (and despite project's name) we do not plan to implement any ZigBee related stack parts.

cIPS is a robust TCP/IP stack for embedded devices.The cIPS library runs without an Operating System and is entirely abstract from any platform. However, it has been fully tested on the Xilinx Spartan 3E Starter Kit.

This project contains an example Code of an Ethernet Network Driver for the Sercos III network which will communicate with help of the unified communication channel. This driver connects the UC Channel (CoSeMa API) to e. g. a VxWorks TCP/IP stack.

nwGTPv2 is free and open source implementation of GPRS Tunneling Protocol version 2 (GTPv2) or Evolved GTP (eGTP). GTPv2 is primarily used for control signalling between Serving Gateway SGW and PDN Gateway (PGW) in Evolved Packet Core (EPC).

MPLS for Linux is a project to implement a MPLS (Multi Protocol Label Switching) stack for the Linux kernel, and portable versions of the signaling protocols associated with MPLS.

nwWimaxAsnCp library is implementation of WiMAX ASN Control Protocol stack as per WiMAX forum specification release 1.0. WiMAX Base Stations and ASN Gateways make use the protocol for control plane signaling on R4, R6 and R8 interfaces.

The IPv6 Stack that runs on your target. FIP is designed to fit in medium-sized 8-bit microcontrollers, while not sacrificing performance on larger devices.

The SDIO-Linux project provides an open source SDIO-stack. The stack comes complete with drivers for the Host and Bus controllers, SD/MMC memory cards, SDIO-bluetooth and Atheros’ WLAN driver.

pwntooth is designed to automate Bluetooth Pen-Testing. It scans for devices, then runs the tools specified in the pwntooth.conf; included blueper, bluesnarfer, Bluetooth Stack Smasher (BSS), carwhisperer, psm_scan, rfcomm_scan, and vcardblaster.

The kernel network stack may behave not as expected, especially in the case of receiving packets. With Ianus it is possible to bypass the kernel network stack and to develop your own network stack in user space or other tools.

The open-source uIP TCP/IP stack provide TCP/IP connectivity to tiny embedded 8-bit microcontrollers, with maintained interoperability and RFC standards compliance.

OpenMAC is a TinyOS-based implementation of IEEE 802.15.4 MAC layer, which lies at the core of MeshNetics ZigBee stack, and provides basic wireless networking (star,peer to peer) to WSN's. Available for low-power ZigBit modules and Atmel AVR Z-Link Kits

Nanov6 is a minature IPv6 stack for the Microchip PIC16 family of microcontrollers. Its modular design and simple API is designed for easy modification and itegration into a wide variety of next-generation network enabled embedded applications.

Let the bee fly freely… The goal of the OpenBee project is to design an IEEE802.15.4 compliant, Zigbee™-like software stack in C. The stack will be target independent (processor, radio transceiver).

SeMA architecture is a protocol stack operating for Adhoc Networks at three interacting layers to accommodate access to general purpose network applications such as printing, file transfer and so on in a highly mobile environment.SeMA architecture has be

"Source Hardware address Translation" provides an Ethernet to IP gateway. Ideally, any Ethernet network client can communicate through the gateway with the IP world on the other side regardless of what the client network stack is configured as. See the project website for how it works. The project has been dormant since 2006 but I would spend some efforts to round and hone edges if there is public interest.