Search Results for "mini pc linux"

VirtualBox is a powerful open-source full virtualization software that allows a user to run one or more “guest” operating systems simultaneously inside “virtual machines” on a single physical “host” machine. It supports a wide variety of host platforms (Linux, Windows, macOS, Solaris, etc.) and guest OSes, enabling, for example, running Linux on a Windows PC, running Windows Server on a Linux host, or even legacy OSes in a controlled environment. This flexibility makes VirtualBox ideal for developers, testers, sysadmins, or hobbyists who need different OS environments, want to test software across systems, or need isolation for development, sandboxing, or security experiments. ...

Open Hardware Monitor is a free and open source hardware monitoring application designed primarily for personal computers. It provides real-time insights into key system metrics such as temperatures, fan speeds, voltages, load percentages, and clock speeds by reading directly from sensors embedded in CPUs, GPUs, motherboards, and storage devices. The tool supports a wide range of sensor hardware found on modern systems, including Intel and AMD processors, NVIDIA and AMD graphics cards, SMART...

ethflop is a DOS TSR that emulates a floppy disk drive. Such virtual floppy disk is, in fact, stored on a Linux server as a classic floppy image. All the communication between ethflop (the TSR) and ethflopd (the Linux daemon) is based on raw Ethernet. No need for any network configuration - the DOS PC only needs to have some kind of Ethernet adapter (physical or emulated, for example through PLIP) and a suitable packet driver.

BrazilFW is a mini Linux distribution designed to be used as a Firewall and Router that runs easily on older computers. An old PC running BrazilFW is much more powerful and efficient than commercial software for routing in offices and residences running on a "powerful" computer. BrazilFW is based on Coyote Linux, which was designed by Joshua Jackson who discontinued Coyote Linux in version 2.24 in August 2005.

...You can ping/traceroute them, or ping/traceroute the other hosts/routers from the virtual PCs when you study the Cisco routers in the Dynamips. VPCS is not the traditional PC, it is just a program running on the Linux or Windows, and only few network commands can be used in it. But VPCS can give you a big hand when you study the Cisco devices in the Dynamips. VPCS can replace the routers or VMware boxes which are used as PCs in the Dynamips network.

This software is designed to remotely control a personal computer from another one on the local network or the Internet. Program is written in C language using the GTK+ graphical library. It can connect to the remote computer, send key presses, multiple presses and key sequences to a PC and run applications on it.

Open Source Linux driver for wireless network cards (DWL-[G]520+ PCI, DWL-[G]650+ CardBus, GL-2422MP mini-PCI, DWL-120+ USB etc.) which use the entirely undocumented Texas Instruments (TI) ACX100/ACX111 chips, for 2.4.x , 2.6.x to 3.x kernels. FreeBSD: see some other website (FIXME URL got clipped). !! BIG FAT NOTE: development (i.e., driver "releases") is happening in git source repository tree (as of 2011-09-04), thus you're expected to look there (see web site menu Code --> Git) !!

The IPv6 Stack that runs on your target. FIP is designed to fit in medium-sized 8-bit microcontrollers, while not sacrificing performance on larger devices.

Milkshake is a Slackware-based Linux distribution that boots from a USB stick and turns an unused PC into a home firewall/router. This project is currently in prealpha and is not intended for use yet. Please do not rate it up or down yet.

Simple, quick'n'dirty Qt network traffic diagram. The software is provided as it is. Feel free to use it, modify it, run it, or even delete it from your PC. I don't care. Get this running via "qmake && make && ./qnd [iface]"

DIET-PC (DIskless Embedded Technology Personal Computer) is a software kitset enabling IT professionals to build an open source GUI appliance based on commodity x86 (PC), PowerPC (Mac) or ARM (handheld) hardware, using an embedded Linux methodology.

arlinux is a mini-linux (floppy) distro for Recovery o Router/Firewall purpose. Realname is Advanced (Router/Recovery) Linux

RTelnet is a reverse Telnet, it's increadably useful to get behind firewalls and NAT's or routers running ip masqurading. very useful for remotely admin someones PC remotely when they don't know how to do anything like opening their firewall.

A linux liveCD for the non-invasive, non-destructive detection and analysis of WiFi (802.11) networks. It also provides mechanisms to set up a PC as an 802.11 Access Point.

Project name: frecl (free remote control). This project is devoted to a problem of remote controlling PC. (For an example: management of several IR-remote controls of the several computers incorporated into a network, using one or more IR-receivers.).

We are developing an advanced and totally GPL'ed Linux mini-distribution with uClibc libraries for AR7-based modem/router like D-Link DSL-30xT.

Share your internet access! This firmware turns any WLAN router with openwrt: Linksys WRT54g/gs into a hotspot for free or fee. Easy web interface. No PC needed. Welcome page,RADIUS/NoCatsplash, can use server for reports,online voucher sales,monitoring.

Prismstumbler is a software which finds 802.11 (WLAN) networks. It is designed to be a flexible tool to find as much information about wireless LAN installations as possible. It comes with an easy to use frontend suitable for both PC and PDA displays.

Routercli is a Cisco-like shell for diskless or one-floppy Linux mini-distributions. It includes network configuration and manipulation, rip daemon, standard acls and other utilities. It is a replacement for a shell on diskless or onefloppy linux.

<b>cnRemoteControl</b> is a client/server based application to control your Linux PC by a Microsoft Windows program via network.

linux4501 is a linux software distribution for the soekris net4501 single board PC (see www.soekris.com). It fits on a 16 or 32 MB Compactflash card and turns the 4501 into a firewall and (dsl) router. It can also be used as a starting point for your ow

Linux/Windows Admin with interactive features to control Resources on a remote PC

This project tries to explain the construction of a open wireless access point using Linux. Use your old PC to build your own Wireless Access Point.

Linux Mobile System is a full Linux system within a USB Flash Memory Drive. This system will be able to boot from any i386 based PC, so we can to run a lot of utilities: network diagnostic, disk diagnostic, administration terminal, etcetera.

This project aims to port the NOKIA Wireless LAN Software for the NOKIA C110/C111 Wireless LAN PC Cards to KDE.