Search Results for "kali-linux pc emulator"

WANem is a wide area network emulator. It supports various features such a bandwidth limitation, latency, packet loss, network disconnection among other wide area network characteristics.

BrazilFW is a mini Linux distribution designed to be used as a Firewall and Router that runs easily on older computers. An old PC running BrazilFW is much more powerful and efficient than commercial software for routing in offices and residences running on a "powerful" computer. BrazilFW is based on Coyote Linux, which was designed by Joshua Jackson who discontinued Coyote Linux in version 2.24 in August 2005. In that same month comes on the scene BrazilFW Firewall and Router (BFW...

The VPCS can simulate up to 9 PCs. You can ping/traceroute them, or ping/traceroute the other hosts/routers from the virtual PCs when you study the Cisco routers in the Dynamips. VPCS is not the traditional PC, it is just a program running on the Linux or Windows, and only few network commands can be used in it. But VPCS can give you a big hand when you study the Cisco devices in the Dynamips. VPCS can replace the routers or VMware boxes which are used as PCs in the Dynamips network.

This software is designed to remotely control a personal computer from another one on the local network or the Internet. Program is written in C language using the GTK+ graphical library. It can connect to the remote computer, send key presses, multiple presses and key sequences to a PC and run applications on it.

The IPv6 Stack that runs on your target. FIP is designed to fit in medium-sized 8-bit microcontrollers, while not sacrificing performance on larger devices.

Milkshake is a Slackware-based Linux distribution that boots from a USB stick and turns an unused PC into a home firewall/router. This project is currently in prealpha and is not intended for use yet. Please do not rate it up or down yet.

Simple, quick'n'dirty Qt network traffic diagram. The software is provided as it is. Feel free to use it, modify it, run it, or even delete it from your PC. I don't care. Get this running via "qmake && make && ./qnd [iface]"

DIET-PC (DIskless Embedded Technology Personal Computer) is a software kitset enabling IT professionals to build an open source GUI appliance based on commodity x86 (PC), PowerPC (Mac) or ARM (handheld) hardware, using an embedded Linux methodology.

RTelnet is a reverse Telnet, it's increadably useful to get behind firewalls and NAT's or routers running ip masqurading. very useful for remotely admin someones PC remotely when they don't know how to do anything like opening their firewall.

A linux liveCD for the non-invasive, non-destructive detection and analysis of WiFi (802.11) networks. It also provides mechanisms to set up a PC as an 802.11 Access Point.

Project name: frecl (free remote control). This project is devoted to a problem of remote controlling PC. (For an example: management of several IR-remote controls of the several computers incorporated into a network, using one or more IR-receivers.).

Slirp is a SLIP/PPP link emulator. Clients think it's a normal connection! The Slirp Maintance Project is what it says: keep Slirp up and running! (Primary Developer needed!)

Share your internet access! This firmware turns any WLAN router with openwrt: Linksys WRT54g/gs into a hotspot for free or fee. Easy web interface. No PC needed. Welcome page,RADIUS/NoCatsplash, can use server for reports,online voucher sales,monitoring.

Prismstumbler is a software which finds 802.11 (WLAN) networks. It is designed to be a flexible tool to find as much information about wireless LAN installations as possible. It comes with an easy to use frontend suitable for both PC and PDA displays.

<b>cnRemoteControl</b> is a client/server based application to control your Linux PC by a Microsoft Windows program via network.

linux4501 is a linux software distribution for the soekris net4501 single board PC (see www.soekris.com). It fits on a 16 or 32 MB Compactflash card and turns the 4501 into a firewall and (dsl) router. It can also be used as a starting point for your ow

Linux/Windows Admin with interactive features to control Resources on a remote PC

This project tries to explain the construction of a open wireless access point using Linux. Use your old PC to build your own Wireless Access Point.

This project aims to port the NOKIA Wireless LAN Software for the NOKIA C110/C111 Wireless LAN PC Cards to KDE.

Sputnik Gateway Software turns any Intel-based laptop or PC with an 802.11 card and an Internet connection into a full-featured wireless Sputnik Gateway. This means that any wireless-equipped laptop, PC, Macintosh or PDA within range — typically about 150

Linux Mobile System is a full Linux system within a USB Flash Memory Drive. This system will be able to boot from any i386 based PC, so we can to run a lot of utilities: network diagnostic, disk diagnostic, administration terminal, etcetera.

snmptherm is SNMP agent (uses Net-SNMP AgentX) for DS1621 digital thermomether based PC thermometer / WebTherm. snmptherm uses Claudio Lanconelli's libtherm. Currently it is possible to monitor up to 8 sensors (one controller)