Search Results for "x86"

Accelerate Your Network Performance with UCX. Collaboration between industry, laboratories, and academia to create an open-source, production-grade communication framework for data-centric and high-performance applications. Unified Communication X (UCX) is an award winning, optimized production proven communication framework for modern, high-bandwidth and low-latency networks. UCX exposes a set of abstract communication primitives which utilize the best of available hardware resources and...

PJON® (Padded Jittering Operative Network) is an experimental, Arduino-compatible, multi-master, multi-media, software-defined network protocol that can be easily cross-compiled on many microcontrollers and real-time operative systems like ATtiny, ATmega, SAMD, ESP8266, ESP32, STM32, Teensy, Raspberry Pi, Zephyr, Linux, Windows x86, Apple and Android. PJON operates on a wide range of media, data links and existing protocols like PJDL, PJDLR, PJDLS, Serial, RS485, USB, ASK/FSK, LoRa, UDP, TCP, MQTT and ESPNOW. PJON is an experimental network protocol stack crafted in 10 years of research and experimentation. It was originally developed as an open-source alternative to i2c and 1-Wire but during development, its scope and features have been extended to cover use cases where IP is generally applied. ...

...Requirements: * Network tap or L2 Managed Switch with option to mirror traffic to specified port * Windows XP 32-bit (or better) * .NET Framework 4.0 (or better) * WinPcap 4.1.3 (in archive) * Microsoft Visual C++ 2015 Runtime (x86) (in archive) If your gateway is powered by Windows, you can try to run this app and select Network Interface which is connected to Local Network. It should work but I did not test it. L2 switch in this case is not required. =============== Donation balance $0 ===============

This is a ping monitoring tool for almost any Windows System (tested on Win 98*-10 and Server 2003-2016) and it runs on Linux via WINE either*. No .NET is needed. This is a 32bit app and will work on x86 and x64 architectures. Adjustable and easy to use. And you can choose if you want it to create RAW packets instead of using Windows icmp.dll resources. Usage examples: PingMon.exe HOST1 HOST2 Will open 2 instances of PingMon and start pinging immediately. Since Windows shortcuts are limited, there also is a way to run a batch file like this: start PingMon.exe HOST 1 start PingMon.exe HOST 2 ... ...

...It is built upon pcap libs (winpcap, and libpcap) and can run in Windows and most Linux flavors. The current stable version (2.0) provides shared libraries (.dll and .SO) compiled and tested for both x86 and x64 architectures. Sniffer4J work’s by parsing packets in a comprehensive Pdu format. Each Pdu encapsulates the next one, making easy to navigate through the Frame. Frames can be forged in the same manner allowing them to be injected in the network. Sniffer4J support several protocols including: * Ethernet I & II (including LLC and SNAP frames) * Vlan (802.1Q) * Arp * Ipv4, Ipv6, (including options) * Next Header for IpV6 * Ipsec * TCP (including options) * Udp * Icmp (including RFC 2461 and Ipv6) * Lldp * Ipx And more to come… Remember: If you don’t test your network, some else will… Bernardo

The GDAC (Generic Device Access and Control) framework is an extensible multithreaded cross platform (Linux (x86,VME)/Windows) C++ device control environment. It typically will be used as the basis for custom OPC servers or front-end control software.

Darwin x86/PPC/MACOSX driver for RealTek network cards (RTL8139). Purpose: to increase the number of compatible network cards that work with Apple's Opensource Operating System, Darwin.