Search Results for "simulator"

Build, Design and Test your network in a risk-free virtual environment and access the largest networking community to help. Whether you are studying for your first networking exam or building out a state-wide telecommunications network, GNS3 offers an easy way to design and build networks of any size without the need for hardware.

A wireless push-type network simulator that considers locality of demand for performance improvement. The network environment consists of multiple directed emitters for parallel data broadcasting. Performance depends on the mean response time of clients.

The Common Open Research Emulator (CORE) is a tool for emulating networks on one or more machines. You can connect these emulated networks to live networks. CORE consists of a GUI for drawing topologies of lightweight virtual machines, and Python modules for scripting network emulation.

NET-Simulator was created to help lecturers and students in the study of computer networks. Students can build virtural networks in the virtual environment provided by NET-Simulator. These devices are controlled by means of command line interface.

The VPCS can simulate up to 9 PCs. You can ping/traceroute them, or ping/traceroute the other hosts/routers from the virtual PCs when you study the Cisco routers in the Dynamips. VPCS is not the traditional PC, it is just a program running on the Linux or Windows, and only few network commands can be used in it. But VPCS can give you a big hand when you study the Cisco devices in the Dynamips. VPCS can replace the routers or VMware boxes which are used as PCs in the Dynamips network.

...Server: - FTP - TFTP - Syslog - Web - Remote Command - General UDP server - Multicast server Client utilities: - Multicast client - TFTP client Starting on version 0.2.0, a powerful network connection tools UBridge is added, it can bridge: - VXLAN (newly released) - UDP sessions - NIC card of the PC - Connections to Cisco Router Simulator "GNS3/dynamips" and H3C Router Simulator (LITO/CEN). UBridge can also be used as a Ethernet over UDP tunnel to remote bridge PC's local NIC, VXLAN, UDP proxy etc. Visit the Wiki page for detail. GUI tools include a network monitoring tool PMON, a SNMP and IP scanner. The project aim is to make them as light weight tools that can be directly executed in command prompt without the need of installation. ...

A java framework for simulating mobility models in mobile Ad-Hoc networks MANET. This simulator can generate mobility traces for various mobility models, in many formats, resimulate, evaluate, create Excel diagram, cluster, generate form base on XML.

ShoX is a scalable simulator for wireless networks written in Java. It is easy to install, configure and use, so that reliable and expressive scientific results can be gathered in a short time. Documentation: http://sourceforge.net/apps/mediawiki/shox

The project is implemented as part of the CS-110 operating system course at IIIT Bangalore 2013. Aodv protocol is implemented on GPU using CUDA 4.0. A significant gain in execution time is observed when compared to CPU. Thus a simulator which uses GPU can be built on similar lines of NS2 if all the protocols can be parallelized and implemented on GPU. Guide: Prof Shrisha Rao srao@iiitb.ac.in Prof Poonacha P G poonacha.pg@iiitb.ac.in Students: Abhilash C S abhilash.gowder@iiitb.org Abhishek Varshney abhishek.varshney@iiitb.org Dilip S dilip.s@iiitb.org Navik Yogesh Laljibhai navik.yogeshlaljibhai@iiitb.org Pradyot H Adavi pradyot.h.adavi@iiitb.org

The project is implemented as part of the CS-110 operating system course at IIIT Bangalore 2013. Aodv protocol is implemented on GPU using CUDA 4.0. A significant gain in execution time is observed when compared to CPU. Thus a simulator which uses GPU can be built on similar lines of NS2 if all the protocols can be parallelized and implemented on GPU. Guide: Prof Shrisha Rao srao@iiitb.ac.in Prof Poonacha P G poonacha.pg@iiitb.ac.in Students: Abhilash C S abhilash.gowder@iiitb.org Abhishek Varshney abhishek.varshney@iiitb.org Dilip S dilip.s@iiitb.org Navik Yogesh Laljibhai navik.yogeshlaljibhai@iiitb.org Pradyot H Adavi pradyot.h.adavi@iiitb.org

MiXiM is a simulator for wireless and mobile networks using the OMNeT++ simulation engine.

Simple WAN Simulator (simWANsim) is a SIMPLE WAN simulator that configures specific network intefaces in order to simulate high-latency networks typical in WAN setups.

...Features: * 5-port router for mesh network (0 south, 1 west, 2 north, 3 east, 4 local) * The dimension order routing (XY routing) * Available flow control methods: wormhole, SDM, VC * Reconfigurable number of virtual circuits, buffer size, data width * Fully synthesizable router implementation * SystemC testbench provided Languages: * Routers are written in synthesizable SystemVerilog * Test benches are provided by SystemC Software requirements: * The open source Nangate 45nm cell library * Synopsys Design Compiler (Synthesis) * Cadence IUS -- NC Simulator (for SystemC/Verilog co-simulation)

Router Radio Protocol Tools provide router (server) simulator and a radio (client) simulator for the radio-router protocol. The router simulator can be used to support the integration of the protocol into a radio.

An adhoc network simulator that tests multiple transceiver base stations in a peer to peer environment.

For new versions, check https://github.com/Darkkey/javaNetSim javaNetSim (Java Network Simulator) - it's a fork of a project jFirewallSim. The main goal of javaNetSim is creating a software to simulate various TCP/IP networks based on Ethernet, WiFi, PPP, etc...

This educational software simulates an Ad-hoc network with AODV algorithm, it uses a high level view and only works in Routing layer. it has a user-friendly graphical user interface and has been written in java language.

Dynagen is a utility for use with the dynamips Cisco router simulator. It allows you to quickly provision and manage virtual networks using an INI like configuration file.

A network simulator written in flash. Build up a topolog and send packets throught your network, see and inspect them as they travel, change the headers and observe such protocols as ARP and switch learning.

NoCsim is a base library and front end for simulating Network On Chip environments utilizing Wormhole or Virtual Cut-Through routers. The current usage of the simulator includes experimentation with various routing protocols and functional unit mappings.

Mupisim is a simulator for distributed, mobile systems. Its primary purpose is the study of mobile processes (e.g. mobile agents) and their communication mechanisms. It may also be used to evaluate the efficiency of a given process migration scheme.

Design and implementation of the Observation-based Cooperation Enforcement in Mobile Ad-hoc Networks (OCEAN) protocol, on top of the ns2 network simulator, using Dynamic Source Routing (DSR).

The goal of this project is to be an improvement of the original Network Animator (NAM) module provided as part of the Network Simulator 2 (NS2). This tool provides topology visualization, TCL script generation, and enhanced simulation animation.

A feedback-enhanced framework for routing in wireless sensor networks. Speeds up the process of implementing routing techniques. Enables piggybacking of routing information on data packets. Written for the Omnet++ simulator and the Mobility Framework.

...Imediate objectives will be the implementation of a full SNMP protocol stack, a Manager API and an Agent API. Future objectives include the development of several managing tools, and an Agent simulator.