Search Results for "web based system"

ethflop is a DOS TSR that emulates a floppy disk drive. Such virtual floppy disk is, in fact, stored on a Linux server as a classic floppy image. All the communication between ethflop (the TSR) and ethflopd (the Linux daemon) is based on raw Ethernet. No need for any network configuration - the DOS PC only needs to have some kind of Ethernet adapter (physical or emulated, for example through PLIP) and a suitable packet driver.

A secure and open source operating system. All communications that reasonably can be will be encrypted. It will also have fined-tuned firewall capabilities, with a default policy of deny all inbound except HTTP HTTPS and SSH. Web browser will be sand boxed from other parts of the OS. In order to access saved passwords, cache, cookies, ect in web browser, username/password are required.

netboot65 allows 6502 based computers to boot via a network. Currently only the C64 version is actively developed and tested. Also includes telnet and gopher clients, and a "web application server" for development of web sites in 6502 assembler.

Allo stato attuale Internet non sara totalmente libera fintantochč non saranno completamente libere ed accessibili le strutture fisiche che lo trasportano.CityLAN vuole essere il manifesto di questa libertŕ...

CAN Remote Automation and Control with the AVR Set of tool for Web based Home Automation over the CAN-Bus including firmware and PCB.

Replace a Vehicle Wiring Harness with a simple CAN network and unified power distribution. Based on ATMEL AVR microcontrollers and Microchip MCP25050 CAN I/O expanders.

GTCop Professional Security Appliance aims to provide a powerful tool for satellite communications, with enhanced QoS and bandwidth controls. As derived from IPCop Firewall, it is a stable, secure, easy to configure and maintain GNU/Linux firewall box.

Intercepts and parses all instant message traffic received by the computer. A high performance engine allows conversations to be viewed immediately and/or saved for later analysis. NOTE: Requires WINPCAP

The Yakko project is a home automation system. It defines a new protocol implemented as firmware running in AVR atmega microprocessors. The goal is to build a method to make logical connections between hardware devices such as lamps, switchers and so on.

Cnc's IP Data Volume Report: Logs IP to IP contact, number of packets, bytes, time of contact, Ethernet too! View via local web interface. Very simple for those who want to view who your computer is contacting the most!

Parallel Events and Asynchronous tasKing Library. Originally combining multi-threading with an efficient I/O event model, it's now more a lightweight object-oriented framework for event-based applications.

The SBus is a family of high-speed packet-based databus standards, suitable for both networking and interdevice communication. They are optimized for high data density transactions. This project creates and documents the standards, schematics, and driver

Port lwIP and uC/OS-II on a TI C6000 DSP platform. The 10/100M ethernet was based on a DaughterCard designed by ourselves. And it has been tested on TI C6711 DSK & C6713 DSK. The schematic files of the daughtercard is also part of this project.

Back Orifice XP is a network remote administration tool, gives control of the system, network, registry, passwords, file system, and processes. Based in BO2K 1.1 but with a new plugin architecture.

FTP BNC. File Transfer Protocol Bouncer. Allows Any one to setup a Bouncer to a ftp server. Uses, mask the real identity of a ftp server, provide link over lans running NAT or etc. Proxy and FXP modes. Commands, or commands and data in proxy, data in FXP

daitrix is a secure os built on security, ease of use, and linux/unix based. verry fast to install with 4 setup types- dev, server, desktop and all. everything a normal linux distro has and then some.