Search Results for "switch device"

ModbusBB is a professional Modbus Master/Client application for Windows, designed for engineers who need to test, debug, and monitor Modbus slave devices quickly and reliably. Supports both Modbus TCP/IP and Modbus RTU serial protocols with full configuration options for any industrial device. All standard function codes FC01 through FC16 are supported including Read Coils, Read Discrete Inputs, Read Holding Registers, Read Input Registers, Write Single Coil, Write Single Register, and Write Multiple Registers. Key features: - Auto-polling with configurable intervals from 100ms to 10 seconds - Complete communication log with request/response details and CSV export - Device scanner to discover slave IDs and valid register ranges - Watchdog alerts when values change or exceed thresholds - Connection profiles to save and switch between device configurations - Data logging to CSV with timestamps for trend analysis in Excel - Modern GUI and command-line (CLI) interface for auto

UbiquitiWgWizard automates the creation of: • WireGuard interface configuration for EdgeOS • Firewall rules (WG-IN, WG-LOCAL, WAN->LOCAL) • NAT masquerade rules for VPN clients • Client configuration files (.conf) • Optional QR codes for mobile clients • A step-by-step HOW_TO_APPLY_CONFIG.txt document The wizard prompts for: • Router model • WAN interface • LAN interface(s) • Split tunnel vs full tunnel (per client) • Public endpoint / DDNS • Number of clients...

TraceMAC is a Windows/Linux command-line tool that allows you to trace a specific MAC address thru Cisco switches. It works by connecting to a switch using SSH, SNMP, Telnet, HTTP or HTTPS and do some "show commands" and later process the output, this will happen recursively until it finds the switch where that MAC address (PC/Printer/Etc) is directly connected. Note: It works with Cisco switches only and you must have CDP enabled at least on trunks/links between switches! Is tested...

This application helps to determine, which device in the Local Network (LAN) consumes Internet. Calculates separately incoming and outgoing traffic. Requirements: * Network tap or L2 Managed Switch with option to mirror traffic to specified port * Windows XP 32-bit (or better) * .NET Framework 4.0 (or better) * WinPcap 4.1.3 (in archive) * Microsoft Visual C++ 2015 Runtime (x86) (in archive) If your gateway is powered by Windows, you can try to run this app and select Network Interface which is connected to Local Network. ...

VMPS (VLAN Management Policy Server) is a way of assigning switch ports to specific VLANs based on MAC address of connecting device. OpenVMPS is a GPL implementation of VMPS.

Pings Host on the net, on error, connect to a net device that you choose and execute any command you choose, If the ping fails Super-ping do Telnet/SSH to the device you choosed (usually the main switch / router) and then run the commands you entered and save the output to a log file, very usefull to cases that you lost communication to devices in the net only for few seconds every time and you do not have enough time to access the switches / router to check the reason, SuperPing will do it for you. ...

The 'NES Open Switch' is a network protocol stack. It contains the protocol implementation required to run a networking device in a computer network. NES Open Switch supports various networking media as: Ethernet, SDH/Sonet, OTN and WDM. The supporting protocols for different media are being developed as individual modules in the stack. For example for Ethernet media support protocol modules like STP, CFM and LACP are present in the stack.