Search Results for "protocol stack"

...In fact, it was started by many long-time Quagga developers who combined their efforts to improve on Quagga’s well-established foundation in order to create the best routing protocol stack available. We invite you to participate in the FRRouting community and help shape the future of networking.

...PJON is an experimental network protocol stack crafted in 10 years of research and experimentation. It was originally developed as an open-source alternative to i2c and 1-Wire but during development, its scope and features have been extended to cover use cases where IP is generally applied. PJON has been engineered to have a variable footprint (4.2-8.2 kB program memory) and overhead (5-35 bytes per packet) depending on its configuration.

Open-Source BACnet Protocol (see www.bacnet.org) stack for Linux. This project's goal is to develop a complete implementation of the BACnet protocol for use by anyone who wishes to give their products BACnet communication capability.

Reliable group communication based on IP multicast and configurable protocol stack

...In fact, it was started by many long-time Quagga developers who combined their efforts to improve on Quagga's well-established foundation in order to create the best routing protocol stack available. We invite you to participate in the FRRouting community and help shape the future of networking. This is not an official release from the FRRouting Project. Credentials: frradmin / frr

netstack is a userspace TCP/IP networking stack written in Go that implements core IPv4/IPv6 protocols with a focus on correctness, isolation, and testability. By running entirely in user space, it avoids kernel dependencies and can be embedded into sandboxes, virtualized environments, or custom appliances. Its architecture models NICs, link endpoints, route tables, and protocol engines as composable interfaces, enabling precise control over packet flow and easy mocking in tests. ...

openCONFIGURATOR is an open-source configuration framework for easy setup, configuration and maintenance of any POWERLINK (https://goo.gl/U9tjiy) network. It ideally complements openPOWERLINK, the open source POWERLINK protocol stack for master and slave. The project consists of a core library implementing the configuration algorithms and an eclipse plugin base user interface. For XDD tooling and validation support within eclipse please visit: https://goo.gl/NBytgg Please use the update site to install the plugin in your eclipse environment: http://sourceforge.net/projects/eclipse-plugin.openconf.p/files/update-site/ KNOWN ISSUE WITH THE UPDATE SITE DUE TO SOURCEFORGE ENCRYPTION POLICIES: https://goo.gl/kVr2ZZ Install via Eclipse marketplace: http://goo.gl/vweJ9h User Manual: https://goo.gl/viGd5P For Linux distributions with Boost 1.54.0 please use: https://goo.gl/hMRTss For Linux distributions with Boost 1.61.0 please use: https://goo.gl/ZSvW7C

lua-resty-waf is a web application firewall implemented in Lua for OpenResty/NGINX, designed to run inline at the edge with low overhead. It inspects requests and responses during NGINX phases, applying rule logic and anomaly scoring to detect patterns like SQL injection, cross-site scripting, and protocol abuse. Rules are organized into policies with configurable actions—block, log, or allow—and can leverage shared dictionaries for counters, rate limits, and caching decisions. Because it...

...On BSD-derived systems such as OSX, we use tools like ipfw and pfctl to inject failure. On Linux, we use iptables and tc. Comcast is merely a thin wrapper around these controls. Windows support may be possible with wipfw or even the native network stack, but this has not yet been implemented in Comcast and may be at a later date. On Linux, Comcast supports several options: device, latency, target/default bandwidth, packet loss, protocol, and port number.

openCONFIGURATOR TCL/TK GUI is an open-source configuration tool for easy setup, configuration and maintenance of any POWERLINK network. It ideally complements openPOWERLINK, the open source POWERLINK protocol stack for master and slave. THIS APPLICATION IS NO LONGER SUPPORTED. PLEASE INSTALL THE ECLIPSE PLUGIN BASED OPENCONFIGURATOR.

CANopen is the internationally standardized (EN 50325-4) CAN-based higher-layer protocol for embedded control system, and the CANopenNode is simple and reliable open source software stack used industrial and home automation for serial communication of multiple devices over the CAN/CANopen Network. This support package from Analog Devices, Inc. enables interfacing the required CAN drivers and code to perform CANopen slave operation on Analog Devices Inc ADSP-CM408 mixed signal controller (http://www.analog.com/en/processors-dsp/cm4xx/adsp-cm408f/products/cm40x-ez/eb.html) with the open source CANopen_3_10 code (https://sourceforge.net/projects/canopennode/). ...

RTnet is a hard real-time network protocol stack for the real-time Linux extensions Xenomai and RTAI. It makes use of standard Ethernet, including gigabit. Ethernet-over-1394 support is available based on the RT-FireWire protocol stack.

cIPS is a robust TCP/IP stack for embedded devices.The cIPS library runs without an Operating System and is entirely abstract from any platform. However, it has been fully tested on the Xilinx Spartan 3E Starter Kit.

nwGTPv2 is free and open source implementation of GPRS Tunneling Protocol version 2 (GTPv2) or Evolved GTP (eGTP). GTPv2 is primarily used for control signalling between Serving Gateway SGW and PDN Gateway (PGW) in Evolved Packet Core (EPC).

MPLS for Linux is a project to implement a MPLS (Multi Protocol Label Switching) stack for the Linux kernel, and portable versions of the signaling protocols associated with MPLS.

nwWimaxAsnCp library is implementation of WiMAX ASN Control Protocol stack as per WiMAX forum specification release 1.0. WiMAX Base Stations and ASN Gateways make use the protocol for control plane signaling on R4, R6 and R8 interfaces.

TCP/IP stack for MSX2 computers, supports serial communication (null-modem cable or modem) and Ethernet (by using an Ethernet UNAPI compliant card).

This is a custom network stack with a process-per-protocol, or more accurately, thread-per-protocol design, supporting a crude distributed database intended as demonstration or exercise for students studying the course of computer networking.

SeMA architecture is a protocol stack operating for Adhoc Networks at three interacting layers to accommodate access to general purpose network applications such as printing, file transfer and so on in a highly mobile environment.SeMA architecture has be

FreeSNMP is a free Java SNMP development platform. Imediate objectives will be the implementation of a full SNMP protocol stack, a Manager API and an Agent API. Future objectives include the development of several managing tools, and an Agent simulator.

The Nemesis Project is designed to be a command line based, portable human IP stack for UNIX-like and Windows systems. The suite is broken down by protocol, and should allow for useful scripting of injected packets from simple shell scripts.

This project allows users to create their own lower-level network (such as TCP/IP or another protocol) stack implementations below the sockets layer by converting the current socket layer into a functional API.

uC/IP is a smallish TCP/IP protocol stack developed in ANSI C for microcontrollers and embedded systems.

The LAN Information Server provides something like the "Network Neighbourhood" , but only relying on the TCP/IP protocol stack. There are two versions, a "normal" one (LISa) and a restricted one (resLISa), for the more security concerned users. The first

The 'NES Open Switch' is a network protocol stack. It contains the protocol implementation required to run a networking device in a computer network. NES Open Switch supports various networking media as: Ethernet, SDH/Sonet, OTN and WDM. The supporting protocols for different media are being developed as individual modules in the stack. For example for Ethernet media support protocol modules like STP, CFM and LACP are present in the stack. ...