Search Results for "nic"

Ready to use OpenWRT NAT router appliance for ©VMWare ©ESXi. You only have to uncompress and register it to your ©ESXi server to be able to use it as a fencing device between your LAN network and some NATed network inside your ©ESXi host. It can also be easily configured to serve as a firewall in a dedicated ©ESXi host. You can follow the setup guide at https://33hops.com/vmware-esxi-nat-with-custom-firewall.html The appliance comes in a very small package (less than 5 MB), still...

Package github /asavie/xdp allows one to use XDP sockets from the Go programming language. With the default UDP payload size of 1400 bytes, running on Linux kernel 5.1.20, on a tg3 (so no native XDP support) gigabit NIC, sendudp does around 980 Mb/s, so practically line rate. TL;DR: in the same environment, sending a pre-generated DNS query using an ordinary UDP socket yield around 30 MiB/s whereas sending it using the senddnsqueries example program yields around 77 MiB/s. Connecting a PC with Intel Core i7-7700 CPU running Linux kernel 5.0.17 and igb driver to a laptop with Intel Core i7-5600U CPU running Linux kernel 5.0.9 with e1000e with a cat 5E gigabit ethernet cable.

netstack is a userspace TCP/IP networking stack written in Go that implements core IPv4/IPv6 protocols with a focus on correctness, isolation, and testability. By running entirely in user space, it avoids kernel dependencies and can be embedded into sandboxes, virtualized environments, or custom appliances. Its architecture models NICs, link endpoints, route tables, and protocol engines as composable interfaces, enabling precise control over packet flow and easy mocking in tests. The stack...

Coffee will keep your computer wide awake while your network is active or a program. Coffee prevents standby when your traffic speed on a selected network adapter is above the user configurable threshold or specific software selected. It will keep computer awake without disturbing monitor sleep mode. Have option to delay xx minutes after software does not meet sleep block settings. Have option to send up key press.

...The project aim is to make them as light weight tools that can be directly executed in command prompt without the need of installation. (Except pmon and UBridge to bridge PC's NIC which require Winpcap). The whole package can be put into USB flash and 伴侶highly portable.

MQNIC ( Message Queue NIC ) Virtual Link Layer The Message Queue NIC project provides a virtual link layer for qemu/kvm based virtual machines. The virtual link layer provides transport using the Apache ActiveMQ message server or other message bus and eliminates the need for external IP infrastructure to support VM deployments. Based on the ivshmem technology originally developed by Cam Macdonell the mqnic drivers use zero copy vm<->host data transfers and the apache message server to provide low latency, high bandwidth IP support for virtual data centers while simplifying the provisioning of hosted IP. ...

Nast is a packet sniffer and a LAN analyzer. It sniff packets and save data in files, checks NIC in promisc mode,build LAN hosts list, find a gw,performs a port scanning, catchs daemon banner etc... It also provides a GTK/ncurses interface.

A small suitte to manage text OID files and make templates for third party softwares like Zabbix, Nagios, or Cacti, at the moment Zabbix is the only one implemented, easily and guided by wizards. Is writen in pure BASH scripting and supports "modules" to manage special kind of OIDs (like NIC ones) and to manage 3rd party output templates (like Zabbix or Cacti) Features: -Wizard guided -Scan devices and select OIDs easily -Scan devices from any given OID -Specify regexp include or exclude patterns -Make text files with your selected OIDs -Write your own modules to manage special kind of OIDs (like NIC ones) -Write your own modules for the final output template (just Zabbix at the moment) -Make a template for monitoring softwares (Zabbix, Cacti...) ...

PVNet is a project providing a virtual network interface. It generates numbers of pure virtual ethernet adapter. It is tested for Linux kernel 3.0.8 on amd64 cpu. Its code contains a kernel patch and module code. You can use it to create many ethernet cards. Each device has a single mac address.

Adapted Driver for Intel PRO/Wireless 2200BG NICs under Linux -- for kernels older than 2.6.20 use ipw2200bg, otherwise ipw2200bgN

It's a GUI frontend for iwconfig and ifconfig with the intent to ease the setup of the wireless NIC under GNU/Linux.

The program creates profiles and the user can use them to set the static IP address of their NIC.

A small utility that allows you to change NIC MAC under NetBSD. Based on sea originally written by Fredrik Widlund (for OpenBSD).

Net Sharer,which is a GUI tool to help users to share their net easily,could work in a computer with single-NIC or multi-NIC.The software have an GUI to support port-mapping function too.

This is a standard, non-accelerated network driver for Alacritech's Server and Storage Accelerator.

Network load monitor via /proc/net/dev. Though by putting one's NIC into promiscues mode one can also get statistics for a whole LAN. The 'module name' for CVS is 'netload', the programs name. Presents stats as numbers and bar graphs.

Periodically scans a pre-determined NIC on the host PC. If the NIC's IP address is different from last scan a mail is sent to notify of the change.