Search Results for "universal bootloader"

...It's required if you want to install Windows on computers with old firmware that doesn't support EFI booting. Additional steps are required to get these versions to boot on EFI, such as extracting an EFI-capable bootloader from the installer. WinDiskWriter does it for you.

Arduino support for almost every classic tinyAVR device! Supports ATtiny 1634, 2313/4313, 24/44/84, 441/841, 25/45/85, 261/461/861, 87/167, 48/88, 43 and 828. Supports programming vis ISP, Serial (Optiboot - all parts with >4k flash, and all parts with 4k flash for which an 8k version is available) or VUSB (Micronucleus - where appropriate) There are 272 different versions of micronucleus built (and part of the 2.0.0-dev branch now), and optiboot will dwarf that number! 0 of those have been...

Small universal tool for handling USART STM32 bootloader. Works with all STM32 family devices (also with newest STM32F4 and STM32F0). Dedicated especially for Linux users. Works in shell. There are plans to make a GUI overlay.

This project is a general AVR bootloader, for different type of AVR device, all you need to do is modify macro definition, and you don not need to modify the main program.

The "U-Boot" Universal Bootloader project provides firmware for many CPU architectures and boards, including ADI's Blackfin processors with full source code under GPL.

Universal bootloader for Atmel AVR chips. Main features: - small size (<2kB); - flash 16-bit CRC check (flash read is not required); - can test Application flash with CRC before starting it; - interrupts driven (no dead loops); - TEA encryption support; - command line programmer written in plain C.

Embedded PowerPC Bootloader Project, especially for Embedded PowerPC boards. The code for this project is frozen. Development continues with the "U-Boot" project (Universal Boot Loader, see http://sourceforge.net/projects/u-boot ).