Search Results for "datalogger"

i-Blue 747 / i-Blue 757 / Qstarz BT-Q1000 / i.Trek Z1 / Konet BGL-32 / Holux M-241 / ... control SW (for Java Phones, PalmOS, WinCe (PPC), Java platforms, Windows, Linux, and MacOS). Compatible with most MTK GPS Chipset based loggers.

We needed a datalogger, we found one. But the supplied VB6 program was very crappy, _really_ unusable, even on old XP machines. So I did mine, able to run under windows and linux. All the fun was to reverse the (binary) RS232 protocol. Our is a YC-727D with 2 thermocouple inputs, but the protocol is the same for 1, 2, 3 or 4 inputs models (YC-717, YC-727, YC-737, YC-747). Bytes orders needs to be checked for 3th and 4nd channels tough.

This project is a low cost & lowpower Datalogger based on BeagleBone Black. The data logger is an electronic device that records earthquakes(Sensor network), Wind ,daylight ,power used/produced on the street lamp over time. Data will then be uploaded via a wireless radio MESH network(868 Mhz) to a database server for later analyze. The Prototype is developed on two microcontrollers(AVR and ARM Cortex-A8) with the low power and

fslurp is a program to pull the data from a Fronius inverter systems via a serial port connection. It supports both single and multiple inverter systems through the Interface Card Easy and the Fronius Interface Card/DataLogger Box. Fronius Sensor Card devices are also supported. It supports both human-readable and delimited (CSV-style) text output. Sample output can be seen by building project and exercising one of the test simulator targets (e.g. simIFCEasy). It is written in C++ and has...

A evolved HMI written in JAVA for the control of buildings. Main features: - datalogger - 5 language support - web page access - HMI touchscreen - plugin for hw and sw - supported I/O: * up to 100 digital inputs (REED, volumetric, photocells, etc. ..) * up to 100 digital outputs (sirens, lights, boilers, valves) * up to 24 analog inputs (thermometers, gauges, rain gauges, etc. ..) * up to 12 analog outputs

Este programa esta escrito en Perl y mediante una conexión al puerto serie del equipo local, recopilar la información del equipos clínicos como Pentra ABX80 la trata y guarda en una base de datos MySQL.

Small program currently running on Linux and MacOS to display the output of the wireless dongle of the Extech EX540/542 Wireless TRMS MultiMeter/Datalogger.

AVR Butterfly Logger uses the Atmel AVR Butterfly hardware and open source tools to create a cost effective stand alone datalogger for logging light, temperature, voltage or any general sensor value.

A datalogger for the hygrosens rs-232 thermometer interface written in java. Its meant as a skeleton for further software development.

Yet another tool to read and convert GPS logs from Royaltek RGM-3800 and RBT-2300 (using serial communication), from RBT-3000 (using files), from NMEA logs files (comming from AMOD 3080 datalogger for example).

Arduino based datalogger.

This ECM diagnostic software was designed with the principle in mind of being fully customizable. Base setup is directed for OBD1 Honda ECM's using a modified datalogging code, but can be re-configured for other make/model/code, OBD0,1 & II ECM's

JAWS - Jefferson AWS, linux port of AWS weather station interface. JAWS runs on a linux computer connected via serial to a AWS datalogger. It then logs and sends weather data. The data can be sent to a csv log file, wundergound, and mysql.