A minimal CSPRNG reflecting the Zen of cipher design
AUM is an extremely fast, small-state, cryptographically secure pseudo-random number generator and stream cipher. AUM exhibits uniform distribution, mixes rapidly, has no detected bias, and comes in three variants: AUM16, with an internal state array of 16+4 32-bit words; AUM32, with an internal state of 32+4 words; and AUM64 with a 64+4-word state. The former permit seeding with a key of up to 512 or 1024 bits, the latter with a 2048-bit key.
High voltage parallel programmer for AVR microcontrollers.
AVR-HV is high voltage parallel programmer for Atmel AVR series microcontrollers. AVR-HV allows programming, reading, verifying and configuring AVR microcontrollers with its high voltage programming interface and it connected with PC using USB interface.
A family of FLEA-inspired CSPRNGs and Stream Ciphers
BEDBUG is a small, fast, cryptographically secure pseudo-random number generator (CSPRNG) and stream cipher. It exhibits uniform distribution, mixes rapidly (with worst-case avalanche better than 16-bits), has no detected bias, and comes in three variants: BEDBUG128, with an internal state array of 128+3 32-bit words; BEDBUG256, with an internal state of 256+3 words; and BEDBUG512 with a 512+3-word state. The former permit seeding with a key of up to 4096 or 8192 bits, the latter with a 16384-bit key. The BEDBUG generator itself is a mere 5 lines of code: Three rotations; two pseudo-random lookups. The default BEDBUG configuration alternates the rotation constants unpredictably. These four sets of three values differ between BEDBUG128, BEDBUG256 and BEDBUG512 and were selected, tuned and tested in each case for optimal avalanche, which is never less than 16.5 bits. BEDBUG has passed stringent industry-standard tests for randomness, including NIST and DIEHARD.
Finite element mesh from Blender objects.
Hexahedral finite element mesh from Blender. Fun! Useful with Elmer, Calculix, Gmsh, IA-FEMesh, Febio, others. Documentation available here, or on the Blenbridge website, or on GitHub. Video tutorials are also available.
A console platform for developers to install and use packages.
We are making a console. We are making a daily helper for programmer. Our aim is to have the biggest libraries for Mathematics and Algorithm. Although we, like our Developer+, we are freshmen, but we are no more afraid. Because we have dream. Believe us! Believe Developer+!
A finite element data exchange system
FEDES is a Finite Element Data Exchange System for mapping finite element analysis data between different FE solvers and meshes with different element types and densities. Six commercial FE solvers are supported (ABAQUS, ANSYS, DEFORM, MARC, MORFEO, VULCAN). The FEA data outputted can be visualized with the open source program ParaView.
Small and flexible sprite-based game engine for 2D games. Written in ObjectPascal, it uses the SDL library (and asociates) to do harware-level stuff. It supports Delphi (7-10) and FreePascal.
GraphCAD is a pseudo 3D Computer Aided Design (CAD) program to modeling dinamic and static objects, basics on graph theory. GraphCAD may be used as GIS, Medical Disgnostic, Engineering, Education and Mathematical modeling tool.
CAD 2D for Land Surveying,Civil and more
Operating System : Windows - Linux - Mac OS Drawing CAD 2D Point Line Polygon Rectangle Circle Ellipse Texte Labeling Point Line Polygon Rectangle Circle (Name Code Comment XYZ Length Angle Area Radius ...) Area Calculation by points or by object. Import-Export module : Image bmp,jpg,png CSV TXT SVG DXF R12 SOKKIA SDR33 TOPCON FC4 GTS7 XML LANDXML LEICA GSI8 GSI16
A functional HP-style command-line RPN scientific calculator
HPN is a functional - as opposed to microcode - cross-platform emulation of a classic 1970s Hewlett-Packard scientific calculator for any command-line interface. Its operations completely model the historical and groundbreaking HP-35 series, and functions to support the HP-45 and the later HP-65, 67 and HP-15C are in the pipeline.
The solution to all your problems
The Jsolution package is a collection of programs, scripts,libraries and documents that i have written and use in my daily life.
An aquarium management software with a Simulation Model System
SME LibreAquarium is an Aquarium management system with a Simulation Model Engine (SME) that makes a prediction of the possible measurement values for the different pollutants that affect to these aquatics systems (NO3,PO4, Fe). The simulator consults the recorded analysis to calculate a prediction of the NO3, PO4, Fe, that the these aquatic system produce. It also uses a central (fish, plant and invertebrates) database to check if the actual parameters are Ok, depending on the species that live in the Aquarium. With all the records, the Simulation Model predicts the algae risk too (low,medium,high) and the algae type(green,cyanotic.) using the Redfield coefficient. Appart from that, the program tries to bring another modest contribution to Open Source Software and the World of Aquariums. SME LibreAquarium helps to daily maintenace of the aquarium with habitants control(fishes,plants, invertebrates), expenses, statistics, alarms, etc.
A Object Pascal Library to handle multiple Monitors under Windows.
MultiMon Manager (MMM) is a Library to handle, detect, enumerate and control multiple Monitors under Windows, written in Object Pascal. MMM is capable to use the Windows Low-Level Monitor API including VESA Monitor Control Command Set (VESA MCCS). You can use MMM to read out your Monitor Capabilities like physical Resolution, supported Resolutions and Refresh Rates, Vendor Informations, Firmware Version and current settings like Brightness, Contrast, Gamma and so on. You can use MMM also to send MCCS Commands to your Monitor to turning it into Standby, wake it up again and change its Brightness, Contrast or Gamma Settings. Note that this is done directly by the Monitor and NOT the Graphics Card. You can't believe that? Have a look to your Monitors On-Screen Display when changing Settings with MMM! Furthermore, MMM has methods to place a Window exacty to a Monitor relatively to global Desktop Coordinates and taking Screenshots from a Monitor Content.
to be changed before
EPRI Distribution System Simulator
The OpenDSS is an electric power Distribution System Simulator (DSS) for supporting distributed resource integration and grid modernization efforts. See Discussion Forum for latest news.
System simulation software based on discrete event simulation
Free simulation software for system simulation based on discrete event simulation approach. OpenSIMPLY is an open source simulation software for computer simulation in Delphi and Free Pascal, and also in Lazarus IDE. The project can be used as a network simulation software, traffic simulation software, scientific modeling software and computer simulation software for educational purposes. The package contains: - tutorial based on executable examples with step by step learning of basics - full documentation in HTML and CHM formats for using with any IDE - insight help (pop-up hints) for Delphi and Lazarus IDE's Write the model ones. OpenSIMPLY has an own output manager for GUI and console mode. Installation videos ============== - for Lazarus and Free Pascal https://www.youtube.com/watch?v=RXopJieZM44 - for Delphi https://www.youtube.com/watch?v=jILU0Y6WehI .
Simple CAD program
ZCAD is simple CAD program with dxf2000 file format support. Source code available here http://svn.shamangrad.net/zcad/trunk/
CAS Algorithms embeded as libraries.
Personal research achievements from the authors presented here in the form of symbolic Algebra and non-numerical analysis algorithms implemented in C/C++, Java, and/or Pascal. As part of a more wide, simple, powerful and robust CAS enviroment under development, new code will be continuously added up to this repository. The authors give their welcome and encouragement to everyone interested in bring some kind of collaboration.
Multi-platform tools and information for programming and controlling LEGO MINDSTORMS programmable bricks, such as the NXT, via USB and Bluetooth.
openmsr is a collection of tools around Instrumentation,Control and Automation ( ICA ). It runs under the following OS: Windows, Linux and Mac OSX. Ther are tools like digital simulation, object recognition, SoftPLC. Tools Messen,Steuern und Regeln
Access to Irrlicht Engine SDK from assembler, C, Python, Basic, Pascal
Python ctypes module for the Irrlicht Engine SDK for 2d/3d games and graphics. Compatibility with all Python versions, wich support ctypes module. Second internal project is SWIG wrapper. Additional support for SVG files over AGG or Cairo library. Also irrlicht_c library give access to Irrlicht functional from other programming languages: ASM (FASM), C (TinyC), Basic (FreeBASIC, thinBasic, OxygenBasic), Pascal, Gentee, AutoIt and game frameworks like GameMaker or Blitz.
Portable source code librarian
Snippetsource is a simple yet powerful repository to store code snippets or any other text content. SQLite is used as the database backend which makes fast indexed lookups possible.
vHDL Obfuscator is an small GUI to obfuscate and reformat HDL files
VHDL and Verilog HDL are standards languages for hardware description. Sometimes is necessary to share the source HDL file but maintaining a little level of control and protection of the intellectual property. This tool generate obfuscated code that is almost unreadable to humans, but is still readable to compilers and simulators. This tool use GHDL (https://sourceforge.net/projects/ghdl-updates/), HDLObf (https://sourceforge.net/projects/hdlobf/), Icarus Verilog (https://sourceforge.net/projects/iverilog/) and was created in Lazarus (http://www.lazarus-ide.org/)