Search Results for "simple software manager"

Gobot makes controlling robots and devices incredibly simple and fun. This program connects to an Arduino, and toggles an LED, every one second. Support for devices that use Analog Input/Output (AIO) communication have a shared set of drivers provided using the "gobot/drivers/aio" package. Support for devices that use General Purpose Input/Output (GPIO) communication have a shared set of drivers provided using the "gobot/drivers/gpio" package. Gobot has a extensible system for connecting to...

...A microcontroller contains a simple, resource-constrained processor that can be found in many devices, including appliances, sensors, fitness trackers, industrial automation, and automobiles. Many of these small devices can benefit from connecting to the cloud or locally to other devices, but have limited compute power and memory capacity.

...The J5IK includes a Tessel 2, and everything else you need to do 14 experiments! No programming or soldering experience is required. Microcontrollers and SoC platforms like to say "Hello World" with a simple blinking LED; the following demonstrates how to do this with the Johnny-Five framework.

MySensors (https://www.mysensors.org) is an open source hardware and software community focusing on do-it-yourself home automation and Internet of Things which allows creating original and affordable sensors. NodeManager is intended to take care on your behalf of all those common tasks a MySensors node has to accomplish, speeding up the development cycle of your projects an including the following main components: - Sleep manager: allows managing automatically the complexity behind battery-powered sensors spending most of their time sleeping - Power manager: allows powering on your sensors only while the node is awake - Battery manager: provides common functionalities to read and report the battery level - Remote configuration: allows configuring remotely the node without the need to have physical access to it - Built-in sensors: provide embedded code so to allow their configuration with a single line of common sensors Source code on http://github.com/mysensors/NodeManager