Search Results for "text user interface"

The Zephyr Project is a new generation real-time operating system (RTOS) that supports multiple hardware architectures. It is based on a small-footprint kernel specially designed for use on resource-constrained and embedded systems. The Zephyr OS can be used for a wide range of applications: from simple embedded environmental sensors and LED wearables to sophisticated embedded controllers, smart watches, and IoT wireless applications.

TOISWITCH is a general-Purpose multi I/O-Server for ESP8266. Its build as an easy-to-use Web-GUI-based server for a range of smart home devices. Currently it supports the following types of devices -Power plugs and Power strips incl power measurement -Multicolor (RGB/RGBW/RGBWW) LED lamps incl gamma correction -Switches -Dimmers -Motion detectors -Motor controls -Sensors It has an easy-to-use web-interface to control the devices and configure them. It supports powerful...

...PyRPL implements various digital signal processing (DSP) modules (see features below). It allows to arbitrarily interconnect the available DSP modules and retrieve signal values on timescales below 1 ms. The graphical user interface (GUI) provides a realtime display of the various measurement instruments and allows the easy configuration of DSP signal chains and feedback controllers. At the highest abstraction level, arbitrary feedback sequences can be defined to fulfill tasks as complex as approaching and locking a resonance of a high-finesse Fabry-Perot cavity (tested up to finesse=100,000).

The C-GM Counter is a low cost (<50$) DIY Hardware & Firmware for building a Connected Geiger-Müller counter device to record beta-gamma radiation levels. The counter is the hardware part of the overall A-GM project aimed for providing a long-term continuous measurement of the radioactivity level. see also A-GM Manager at https://www.instructables.com/id/DIY-Radioactivity-Counter-IoT-and-Eco-system/ ** IMPORTANT ** : From v1.4, Arduino Nano require Optiboot bootloader to work, other...

JSTx is used for displaying overlay graphics and text on top of a Philips television, changing channels, receiving remote control keys and changing television display modes. It is a command line utility to execute jointSPACE commands on a device that supports the jointSPACE protocol for Philips televisions (see http://jointspace.sourceforge.net for details on jointSPACE, which is based on DirectFB). It is used in various home automation/internet-of-things projects. There are three...

OWLOS Open source network operating system for managing IoT devices: - does't require internet access or additional servers - ready to connect sensors, actuators, LCD, DHT, Stepper and other devices - does't require programming skills - built-in user interface - use web browser to access and manage your OWLOS nodes - built-in RESTful server - built-in MQTT client - at the same time WiFi access point and station, in any combination: - can be used autonomously - can work on a local network can work via the Internet can integrate with other nodes running under OWLOS - organizing an internal network. without using a servers available in source code