Search Results for "hardware"

The Zephyr Project is a new generation real-time operating system (RTOS) that supports multiple hardware architectures. It is based on a small-footprint kernel specially designed for use on resource-constrained and embedded systems. The Zephyr OS can be used for a wide range of applications: from simple embedded environmental sensors and LED wearables to sophisticated embedded controllers, smart watches, and IoT wireless applications.

...The board can be powered via solar cell or USB and provides a battery charging function and deep-discharge protection for LiPo batteries. Beside the ESP32 the microcontroller part is prepared for a LoRaWAN and a GPS module. Both together provide a powerful hardware which can be used in many different scenarios. Details and the full specification are available at https://iot.halaser.de This repository contains different firmware-examples and applications which can be used together with this board as well as hardware designs which are free to be used.

The C-GM Counter is a low cost (<50$) DIY Hardware & Firmware for building a Connected Geiger-Müller counter device to record beta-gamma radiation levels. The counter is the hardware part of the overall A-GM project aimed for providing a long-term continuous measurement of the radioactivity level. see also A-GM Manager at https://www.instructables.com/id/DIY-Radioactivity-Counter-IoT-and-Eco-system/ ** IMPORTANT ** : From v1.4, Arduino Nano require Optiboot bootloader to work, other boot crashes.

The solution GreenHop aims to perform energy and environmental (temperature, humidity, dew point and atmospheric pressure) monitoring of the Data Center server room, providing energy efficiency indicators through green metrics for Data Centers. The GreenHop solution is based on open source software and hardware. The approach of using open source solutions enables its deployment easier and independently of suppliers at the same time makes the solution scalable to the needs of each organization. Thus, we aim to provide ambiental monitoring of the Data Center server room while we keep the system to be customizable to implement and replicate.

Firmware for hardware which may communicate with the "Brick Daemon" ( http://github.com/Tinkerforge/brickd )