Search Results for "google-visualization-python"

This device shows MeshCore path information on its display. A map with known repeaters of the region are displayed and a table of the connection path the observer reporting to the MQTT server is shown. The MQTT server is not part of this repository.

Monitor for activity of HAM radio digital modes like FT4 or FT8. The data is subsribed at pskreporter.info and presented on the RLCD. Different pages are presented for data aggregation types. Alarming when the band opens up. Histogram of connections made over the different bands with max. distance and antenna direction.

...Device management dashboard service. Supported microcontrollers are CC3220, CC3200, ESP32, ESP8266, STM32F4, STM32L4, STM32F7. Recommended dev kits are ESP32-DevKitC for AWS IoT, ESP32 Kit for Google IoT Core.

...This makes it useful for quantum optics experiments, in particular as a digital feedback controller for analog systems. Based on the open source software provided by the board manufacturer, PyRPL (Python RedPitaya Lockbox) implements many devices that are needed for optics experiments with the Red Pitaya. PyRPL implements various digital signal processing (DSP) modules (see features below). It allows to arbitrarily interconnect the available DSP modules and retrieve signal values on timescales below 1 ms. The graphical user interface (GUI) provides a realtime display of the various measurement instruments and allows the easy configuration of DSP signal chains and feedback controllers. ...

ESP-01, the simplest USD 1.50.- ESP8266 gets a firmware that allows the user to control it by serial port. Therefore it can be used along with any terminal, computer or microcontroller, which is equipped with a serial port (or USB port) -) Connect / disconnect to WiFi and Flespi MQTT broker -) Publish messages -) Subscribe to topics / Unsubscribe from topics -) Read the messages received Furthermore a GUI is on developing process to demonstrate the use. Paypal donations are...

The aim of the project is a lightweight intrusion detection library for embedded devices which supports MSP430 and ARM Cortex based devices. Features include DSP/SIMD support, IoT and embedded protocols, distributed operation, event and history management, tool supported configuration and visualization. There is a Java port that supports less features.

The solution GreenHop aims to perform energy and environmental (temperature, humidity, dew point and atmospheric pressure) monitoring of the Data Center server room, providing energy efficiency indicators through green metrics for Data Centers. The GreenHop solution is based on open source software and hardware. The approach of using open source solutions enables its deployment easier and independently of suppliers at the same time makes the solution scalable to the needs of each...