Search Results for "asn.1 c#"

MultiCAN implements a CAN Bus device support for EPICS. EPICS is a framework for control systems, the CAN Bus is a reliable real-time field bus. The ‘Multi’ und MultiCAN stands for ‘Multi Protocol support’, so it supports more than one protocol for CAN Bus communication. MultiCAN has support for the CANOpen protocol and the older CAN Application Layer (CAL).

... profiles. to combine inputs and outputs. It also supports MQTT including MQTTs as publisher and subscriber to make it possible to combine multiple devices and to create complete scenes with just one click (i.e. to switch on lights within the whole flat). Via MQTT its also possible to integrate the devices within a existiong smart home environment or control them via internet. Its also possible to create timeplans and set short-time-timers. Updates can be easily done within the web interface

The IoT Leaf is a small ESP32-based device which can be used as highly flexible power supply, as embedded controller or as a combination of both: it consists of a board which can be cut into two pieces resulting in two different devices or which can be used as one. The board can be powered via solar cell or USB and provides a battery charging function and deep-discharge protection for LiPo batteries. Beside the ESP32 the microcontroller part is prepared for a LoRaWAN and a GPS module...

... to arbitrarily interconnect the available DSP modules and retrieve signal values on timescales below 1 ms. The graphical user interface (GUI) provides a realtime display of the various measurement instruments and allows the easy configuration of DSP signal chains and feedback controllers. At the highest abstraction level, arbitrary feedback sequences can be defined to fulfill tasks as complex as approaching and locking a resonance of a high-finesse Fabry-Perot cavity (tested up to finesse=100,000).

The aim of the project is a lightweight intrusion detection library for embedded devices which supports MSP430 and ARM Cortex based devices. Features include DSP/SIMD support, IoT and embedded protocols, distributed operation, event and history management, tool supported configuration and visualization. There is a Java port that supports less features.

Firmware for hardware which may communicate with the "Brick Daemon" ( http://github.com/Tinkerforge/brickd )