Search Results for "xcopy-gui"

MAX home automation is a GTK+ application to manage ELV/eQ-3 MAX! cubes. A cube is a gateway to a network of radiator thermostats, shutter contacts etc. Radiator and wall-mounted thermostat schedule can be edited uploaded, stored into a file and restored from there. Wall-mounted thermostat temperature graphs are indicated on a separate page sorted by the installation room. HTTP server is provided for integration with HTTP-enabled controls. E.g. thermostats can be queried and controlled...

TOISWITCH is a general-Purpose multi I/O-Server for ESP8266. Its build as an easy-to-use Web-GUI-based server for a range of smart home devices. Currently it supports the following types of devices -Power plugs and Power strips incl power measurement -Multicolor (RGB/RGBW/RGBWW) LED lamps incl gamma correction -Switches -Dimmers -Motion detectors -Motor controls -Sensors It has an easy-to-use web-interface to control the devices and configure them.

...PyRPL implements various digital signal processing (DSP) modules (see features below). It allows to arbitrarily interconnect the available DSP modules and retrieve signal values on timescales below 1 ms. The graphical user interface (GUI) provides a realtime display of the various measurement instruments and allows the easy configuration of DSP signal chains and feedback controllers. At the highest abstraction level, arbitrary feedback sequences can be defined to fulfill tasks as complex as approaching and locking a resonance of a high-finesse Fabry-Perot cavity (tested up to finesse=100,000).

MQTT-Hyperdash is a fast and efficient dashboard (GUI) for the MQTT framework. It uses the SDL library for graphics rendering, the paho library for communication and the gtk2 framework for user input. The dashboard runs on Linux, but a port to other operating systems is possible. Special features: * Very simple and basic set of base elements. * animated analog input elements, potentiometers

iHome is a fully tested Smart Home Automation system using the Raspberry Pi Zero WiFi SBC and Linux OS and has all the functional features of NEST or ECOBEE smart thermostats with the added benefit of full privacy and security at less than half the price! It incorporates MBLogic with algorithms and Modbus coms for HVAC home control via the ionware modbus compatible ionC1 input/output controller board. The iHome software system comes fully configured as a SD Card image file for...

...Therefore it can be used along with any terminal, computer or microcontroller, which is equipped with a serial port (or USB port) -) Connect / disconnect to WiFi and Flespi MQTT broker -) Publish messages -) Subscribe to topics / Unsubscribe from topics -) Read the messages received Furthermore a GUI is on developing process to demonstrate the use. Paypal donations are welcome! reinharddaemon@gmail.com